1 confguration ? n female connector ? mil-std-348a ? 50 ohms ? straight body geometry ? rg174, rg316, rg188, lmr-100, pe-b100, pe- c100, 0.100 inch interface type ? crimp/solder attachment ? bulkhead features ? max. operating frequency 6 ghz ? good vswr of 1.5:1 ? gold plated brass contact ? 30 in minimum contact plating applications ? general purpose test ? rack and panel mount applications ? custom cable assemblies . description pasternacks PE4442 type n female bulkhead connector with crimp/solder attachment for rg174, rg316, rg188, lmr- 100, pe-b100, pe-c100 and 0.100 inch (.640 inch dd hole) is part of our full line of rf components available for same-day shipping. our type n female connector operates up to a maximum frequency of 6 ghz and offers good vswr of 1.5:1. this type n bulkhead connector allows designers to create external connections on their product enclosures, and can be used in a variety of other rack mount and panel mount applications. our type n female bulkhead connector PE4442 datasheet specifcations and drawing with dimensions are shown below in this pdf. pasternacks broad catalog of rf, microwave and millimeter wave connectors allows designers to confgure and customize their signal connections however they like. whether the need is to provide an i/o for a board design, or simply create a custom cable assembly confguration, pasternack has the right connector for the job. pasternack can also expertly build your custom cable assemblies for you and ship same-day. electrical specifcations description minimum t ypical maximum units frequency range dc 6 ghz vswr 1.5:1 operating voltage (ac) 500 v rms . mechanical specifcations size length 1.59 in [40.39 mm] width/dia. 0.807 in [20.50 mm] . weight 0.083 lbs [37.65 g] . mating cycles 100 cycles click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: n female bulkhead mount connector crimp/solder attachment for rg174, rg316, rg188, lmr-100, pe-b100, pe-c100, 0.100 inch, .640 inch dd hole PE4442 PE4442 rev 1.3 n female bulkhead mount connector crimp/solder attachment for rg174, rg316, rg188, lmr-100, pe- b100, pe-c100, 0.100 inch, .640 inch dd hole rf connectors technical data sheet PE4442
2 material specifcations description material plating contact brass gold 30 in minimum insulation ptfe body brass nickel 100 in minimum crimp sleeve brass nickel washer brass nickel . environmental specifcations temperature operating range -65 to +165 deg c compliance certifcations (see product page for current document) plotted and other data notes: n female bulkhead mount connector crimp/solder attachment for rg174, rg316, rg188, lmr-100, pe-b100, pe-c100, 0.100 inch, .640 inch dd hole from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: n female bulkhead mount connector crimp/solder attachment for rg174, rg316, rg188, lmr-100, pe-b100, pe-c100, 0.100 inch, .640 inch dd hole PE4442 url: https://www.pasternack.com/n-female-standard-rg174-rg316-rg188-connector-PE4442-p.aspx PE4442 rev 1.3 rf connectors technical data sheet PE4442 n female bulkhead mount connector crimp/solder attachment for rg174, rg316, rg188, lmr-100, pe- b100, pe-c100, 0.100 inch, .640 inch dd hole
3 PE4442 rev 1.3 dwg title PE4442 notes: 1. unless otherwise specified all dimensions are nominal. 2. all specifications are subject to change without notice at any time. 3. dimensions are in inches [mm]. 4. fits mil-c-17 and equivalent cables. 1. strip cable as shown & slide ferrule (1) onto cable. tin center conductor. 2. add extension (2) by sliding extension between braid & dielectric. slide ferrule (1) over braid & crimp. 3. solder center conductor through hole in contact. slide ptfe (3) over contact. slide assembly into body & tighten. assembly procedures contact: solder ferrule: .128" hex crimp tool crimp size required fscm no. 53919 cad file 032013-c scale n/a size a 2233 n female bulkhead mount connector crimp/solder attachment for rg174, rg316, rg188, lmr-100, pe-b100, pe-c100, 0.100 inch, .640 inch dd hole PE4442 cad drawing
|