cystech electronics corp. spec. no. : c092h8 issued date : 2015.10.08 revised date : page no. : 1/10 MTB4D0N03BH8 cystek product specification n-channel logic level enhancement mode power mosfet MTB4D0N03BH8 bv dss 30 v i d @v gs =10v, t c =25 c 66 a i d @v gs =10v, t a =25 c 14.8a r dson(typ) @v gs =10v, i d =30a 3.9 m r dson(typ) @v gs =4.5v, i d =20a features 5.5 m ? single drive requirement ? low on-resistance ? fast switching characteristic ? pb-free lead plating and halogen-free package symbol outline MTB4D0N03BH8 dfn5 6 pin 1 g gate d drain s source ordering information device package shipping dfn5 6 MTB4D0N03BH8-0-t6-g 3000 pcs / tape & reel (pb-free lead plating and halogen-free package) environment friendly grade : s for rohs compliant products, g for rohs compliant and green compound products packing spec, t6 : 3000 pcs / tape & reel,13? reel product rank, zero for no rank products product name
cystech electronics corp. spec. no. : c092h8 issued date : 2015.10.08 revised date : page no. : 2/10 MTB4D0N03BH8 cystek product specification absolute maximum ratings (ta=25 c) parameter symbol limits unit drain-source voltage v ds 30 gate-source voltage v gs 20 v continuous drain current @ t c =25 c, v gs =10v 66 continuous drain current @ t c =100 c, v gs =10v i d 41.7 continuous drain current @ t a =25 c, v gs =10v 14.8 *3 continuous drain current @ t a =70 c, v gs =10v i dsm 11.8 *3 pulsed drain current i dm 160 *1 avalanche current i as 40 a avalanche energy @ l=0.1mh, i d =40a, v dd =15v e as 80 *4 repetitive avalanche energy @ l=0.05mh e ar 5 *2 mj t c =25 50 t c =100 p d 20 t a =25 2.5 total power dissipation t a =70 p dsm 1.6 w operating junction and storage temperature range tj, tstg -55~+150 c thermal data parameter symbol value unit thermal resistance, junction-to-case, max r th,j-c 2.5 thermal resistance, junction-to-ambient, max r th,j-a 50 *3 c/w note : 1. pulse width limited by maximum junction temperature 2. duty cycle 1% 3. surface mounted on 1 in2 copper pad of fr-4 board, 125 c/w when mounted on minimum copper pad 4. 100% tested by conditions of l=0.5mh, i as =15a, v gs =10v, v dd =15v characteristics (t c =25 c, unless otherwise specified) symbol min. typ. max. unit test conditions static bv dss 30 - - v gs =0v, i d =250 a v gs(th) 1.0 - 2.5 v v ds = v gs , i d =250 a g fs *1 - 25 - s v ds =5v, i d =24a i gss - - 100 na v gs = 20v - - 1 v ds =24v, v gs =0v i dss - - 25 a v ds =20v, v gs =0v, tj=125 c - 3.9 5.2 m v gs =10v, i d =30a r ds(on) *1 - 5.5 7.5 m v gs =4.5v, i d =20a dynamic ciss - 1446 - coss - 274 - crss - 194 - pf v gs =0v, v ds =15v, f=1mhz
cystech electronics corp. spec. no. : c092h8 issued date : 2015.10.08 revised date : page no. : 3/10 MTB4D0N03BH8 cystek product specification qg (v gs =10v) *1, 2 - 32.3 - qg (v gs =4.5v) *1, 2 - 17 - qgs *1, 2 - 5.2 - qgd *1, 2 - 8.4 - nc v ds =15v, v gs =10v, i d =30a t d(on) *1, 2 - 13 - tr *1, 2 - 16.6 - t d(off) *1, 2 - 44 - t f *1, 2 - 11.6 - ns v ds =15v, i d =24a, v gs =10v, r gs =2.7 rg - 2.2 - v gs =15mv, v ds =0v, f=1mhz source-drain diode i s *1 - - 66 i sm *3 - - 160 a v sd *1 - 0.83 1.2 v i s =20a, v gs =0v trr - 15.5 - ns qrr - 8.5 - nc i f =30a, di f /dt=100a/ s note : *1.pulse test : pulse width 300 s, duty cycle 2% *2.independent of operating temperature *3.pulse width limited by maximum junction temperature. recommended soldering footprint unit : mm
cystech electronics corp. spec. no. : c092h8 issued date : 2015.10.08 revised date : page no. : 4/10 MTB4D0N03BH8 cystek product specification typical characteristics typical output characteristics 0 40 80 120 160 012345 v ds , drain-source voltage(v) i d , drain current(a) 10v, 9v, 8v, 7v, 6v v gs =3v v gs =3.5v v gs =4v v gs =5v brekdown voltage vs ambient temperature 0.4 0.6 0.8 1 1.2 1.4 -75 -50 -25 0 25 50 75 100 125 150 175 tj, junction temperature(c) bv dss , normalized drain-source breakdown voltage i d =250 a, v gs =0v static drain-source on-state resistance vs drain current 1 10 100 1000 0.01 0.1 1 10 100 i d , drain current(a) r ds(on) , static drain-source on-state resistance(m) v gs =10v v gs =3v v gs =4.5v reverse drain current vs source-drain voltage 0.2 0.4 0.6 0.8 1 1.2 04812162 i dr , reverse drain current(a) v sd , source-drain voltage(v) 0 tj=25c tj=125c static drain-source on-state resistance vs gate-source voltage 0 10 20 30 40 50 60 70 80 024681 0 drain-source on-state resistance vs junction tempearture 0 0.4 0.8 1.2 1.6 2 2.4 2.8 -75 -50 -25 0 25 50 75 100 125 150 175 tj, junction temperature(c) r ds(on) , static drain-source on-state resistance(m) v gs =10v, i d =30a r ds( on) @tj=25c :3.9m typ. v gs , gate-source voltage(v) r ds(on) , static drain-source on- state resistance(m) i d =30a
cystech electronics corp. spec. no. : c092h8 issued date : 2015.10.08 revised date : page no. : 5/10 MTB4D0N03BH8 cystek product specification typical characteristics(cont.) capacitance vs drain-to-source voltage 100 1000 10000 0.1 1 10 100 v ds , drain-source voltage(v) capacitance---(pf) c oss ciss crss threshold voltage vs junction tempearture 0.4 0.6 0.8 1 1.2 1.4 -75 -50 -25 0 25 50 75 100 125 150 175 tj, junction temperature(c) v gs(th) , normalizedthreshold voltage i d =250 a i d =1ma forward transfer admittance vs drain current 0.01 0.1 1 10 100 0.001 0.01 0.1 1 10 100 i d , drain current(a) g fs , forward transfer admittance(s) v ds =10v pulsed ta=25c gate charge characteristics 0 2 4 6 8 10 0 1020304 total gate charge---qg(nc) v gs , gate-source voltage(v) 0 i d =30a v ds =15v maximum safe operating area 0.1 1 10 100 1000 0.01 0.1 1 10 100 v ds , drain-source voltage(v) i d , drain current(a) dc 10ms 100ms 1ms 100 s 1s r ds( on) limit t c =25c, tj=150c, v gs =10v, r jc =2.5c/w single pulse maximum drain current vs case temperature 0 10 20 30 40 50 60 70 80 25 50 75 100 125 150 175 t c , case temperature(c) i d , maximum drain current(a) v gs =10v, r jc =2.5c/w
cystech electronics corp. spec. no. : c092h8 issued date : 2015.10.08 revised date : page no. : 6/10 MTB4D0N03BH8 cystek product specification typical characteristics(cont.) typical transfer characteristics 0 20 40 60 80 100 120 140 160 0246810 v gs , gate-source voltage(v) i d , drain current (a) v ds =10v single pulse maximum power dissipation 0 500 1000 1500 2000 2500 3000 1e-04 0.001 0.01 0.1 1 10 100 1000 pulse width(s) power (w) t j(max) =150c t c =25c r jc =2.5c/w transient thermal response curves 0.001 0.01 0.1 1 1.e-04 1.e-03 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 1.e+03 t 1 , square wave pulse duration(s) r(t), normalized effective transient thermal resistance single pulse 0.01 0.02 0.05 0.1 0.2 d=0.5 1.r jc (t)=r(t)*r jc 2.duty factor, d=t 1 /t 2 3.t jm -t c =p dm *r jc (t) 4.r jc =2.5 c/w
cystech electronics corp. spec. no. : c092h8 issued date : 2015.10.08 revised date : page no. : 7/10 MTB4D0N03BH8 cystek product specification reel dimension carrier tape dimension pin #1
cystech electronics corp. spec. no. : c092h8 issued date : 2015.10.08 revised date : page no. : 8/10 MTB4D0N03BH8 cystek product specification recommended wave soldering condition soldering time product peak temperature pb-free devices 260 +0/-5 c 5 +1/-1 seconds recommended temperature profile for ir reflow profile feature sn-pb eutectic assembly pb-free assembly average ramp-up rate (tsmax to tp) 3 c/second max. 3 c/second max. preheat ? temperature min(t s min) ? temperature max(t s max) ? time(ts min to ts max ) 100 c 150 c 60-120 seconds 150 c 200 c 60-180 seconds time maintained above: ? temperature (t l ) ? time (t l ) 183 c 60-150 seconds 217 c 60-150 seconds peak temperature(t p ) 240 +0/-5 c 260 +0/-5 c time within 5 c of actual peak temperature(tp) 10-30 seconds 20-40 seconds ramp down rate 6 c/second max. 6 c/second max. 6 minutes max. 8 minutes max. time 25 c to peak temperature note : all temperatures refer to topside of the package, measured on the package body surface.
cystech electronics corp. spec. no. : c092h8 issued date : 2015.10.08 revised date : page no. : 9/10 MTB4D0N03BH8 cystek product specification dfn5 6 dimension (c forming) millimeters inches millimeters inches dim min. max. min. max. dim min. max. min. max. a 0.900 1.000 0.035 0.039 k 1.190 1.390 0.047 0.055 a3 0.254 ref 0.010 ref b 0.350 0.450 0.014 0.018 d 4.944 5.096 0.195 0.201 e 1.270 typ. 0.050 typ. e 5.974 6.126 0.235 0.241 l 0.559 0.711 0.022 0.028 d1 3.910 4.110 0.154 0.162 l1 0.424 0.576 0.017 0.023 e1 3.375 3.575 0.133 0.141 h 0.574 0.726 0.023 0.029 d2 4.824 4.976 0.190 0.196 10 12 10 12 e2 5.674 5.826 0.223 0.229 notes: 1.controlling dimension: millimeters. 2.maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.if there is any question with packing spec ification or packing method, please cont act your local cystek sales office. material: ? lead: pure tin plated. ? mold compound: epoxy resin family, flammability solid burning class: ul94v-0. marking : b4d0 n03b device n ame date code 8-lead dfn5 6 plastic package cys package code : h8
cystech electronics corp. spec. no. : c092h8 issued date : 2015.10.08 revised date : page no. : 10/10 MTB4D0N03BH8 cystek product specification dfn5 6 dimension (g forming) millimeters inches millimeters inches dim min. max. min. max. dim min. max. min. max. a 0.80 1.00 0.031 0.039 e 5.70 5.90 0.224 0.232 a1 0.00 0.05 0.000 0.002 e 1.27 bsc 0.050 bsc b 0.35 0.49 0.014 0.019 h 5.95 6.20 0.234 0.244 c 0.254 ref 0.010 ref l1 0.10 0.18 0.004 0.007 d 4.90 5.10 0.193 0.201 g 0.60 ref 0.024 ref f 1.40 ref 0.055 ref k 4.00 ref 0.157 ref notes: 1.controlling dimension: millimeters. 2.maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.if there is any question with packing spec ification or packing method, please cont act your local cystek sales office. material: ? lead: pure tin plated. ? mold compound: epoxy resin family, flammability solid burning class: ul94v-0. important notice: ? all rights are reserved. reproduction in whole or in part is prohibited without the prior written approval of cystek. ? cystek reserves the right to make changes to its products without notice. ? cystek semiconductor products are not warranted to be suitab le for use in life-support applications, or systems. ? cystek assumes no liability for any consequence of customer pr oduct design, infringement of pat ents, or application assistance . marking: 8- e c 8 lead power pak plastic packag ystek package code: h dat e code device name 8-lead dfn5 6 plastic package cys package code : h8 b4d0 n03b
|
