frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbal. (deg.) vswr s vswr 1 vswr 3 s-1 s-2 s-3 1-2 1-3 1-5 1.00 8.24 8.24 8.25 0.01 34.26 34.79 34.18 0.10 1.19 1.28 1.27 3.00 8.18 8.20 8.20 0.02 39.68 38.91 37.79 0.05 1.12 1.15 1.15 9.00 8.19 8.18 8.18 0.01 43.37 40.14 39.88 0.07 1.07 1.09 1.09 40.00 8.25 8.24 8.26 0.02 38.37 38.79 39.30 0.11 1.07 1.08 1.08 100.00 8.37 8.36 8.37 0.02 32.04 35.70 36.58 0.35 1.10 1.07 1.07 160.00 8.48 8.44 8.47 0.04 29.20 33.43 34.34 0.49 1.14 1.08 1.07 220.00 8.56 8.54 8.56 0.03 27.92 31.74 32.78 0.65 1.18 1.10 1.09 260.00 8.65 8.61 8.64 0.05 27.62 31.05 32.21 0.72 1.22 1.10 1.09 290.00 8.77 8.72 8.73 0.05 27.39 30.59 31.84 0.85 1.24 1.13 1.11 320.00 8.77 8.71 8.75 0.07 27.12 30.22 31.50 0.96 1.24 1.15 1.13 340.00 8.83 8.77 8.83 0.09 26.99 30.08 31.47 1.18 1.26 1.15 1.13 360.00 8.88 8.81 8.85 0.09 26.73 29.92 31.35 1.29 1.29 1.15 1.13 400.00 8.96 8.90 8.95 0.12 25.96 29.56 31.13 1.46 1.28 1.19 1.17 475.00 9.20 9.08 9.17 0.15 24.79 28.83 30.74 1.86 1.35 1.23 1.21 500.00 9.25 9.12 9.22 0.17 24.57 28.42 30.39 2.07 1.37 1.23 1.23 l = low range [f l to 10 f l ] m = mid range [10 f l to f u /2] u= upper range [f u /2 to f u ] freq. range (mhz) isolation (db) insertion loss (db) above 7.8 db phase unbalance (degrees) amplitude unbalance (db) f l -f u l m u l m u l m u l m u ty p. min. ty p. min. ty p. min. ty p. max. ty p. max. ty p. max. max. max. max. max. max. max. 1-500 30 25 26 18 24 18 0.5 0.8 0.7 1.2 1.0 2.2 4 8 20 0.2 0.4 1.2 typical performance data electrical specifcations maximum ratings coaxial connections sum port s port 1,2,3,4,5,6 1,2,3,4,5,6 operating temperature -55c to 100c storage temperature -55c to 100c power input (as a splitter) 1w max. internal dissipation 0.5w max. outline drawing outline dimensions ( ) inch mm ZBSC-615+ 6 way-0 50 ? 1 to 500 mhz power splitter/combiner rev. c m151107 ZBSC-615+ hy/td/cp 151016 coaxial abcde f 3.50 2.00 .50 .150 3.350 1.00 88.90 50.80 12.70 3.81 85.09 25.40 g h j k wt .125 1.75 .20 .55 grams 3.18 44.45 5.08 13.97 120 case style: uu102 connectors model sma ZBSC-615+ features ? wideband, 1 to 500 mhz ? low insertion loss, 0.7 db typ. ? good isolation, 26 db typ. ? rugged shielded case applications ? vhf/uhf ? communication systems ? receivers and transmitters electrical schematic ZBSC-615+ total loss 8.0 8.4 8.8 9.2 9.6 0 100 200 300 400 500 frequency (mhz) total loss (db) s-1 s-3 s-5 ZBSC-615+ isolation 10 20 30 40 50 60 70 0 100 200 300 400 500 frequency (mhz) isolation (db) 1-2 1-3 1-5 ZBSC-615+ vswr 1.0 1.1 1.2 1.3 1.4 1.5 0 100 200 300 400 500 frequency (mhz) vswr #s vswr #1 vswr #3 vswr permanent damage may occur if any of these limits are exceeded. 1. total loss = insertion loss + 7.8db splitter loss. ht-series tight spot sma wrench from $24.95 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|