available on tape and reel for pick and place manufacturing. usa/canada: toll free: europe : (315) 432-8909 (800) 544-2414 +44 2392-232392 model 250 375 - 4z50 - 2 features: ? dc ? 2.0 ghz ? 25 watts ? beo ceramic ? non-nichrome resistive element ? low vswr ? 100% tested surface mount termination 25 watts, 50 general specifications resistive element thick film substrate beryllium oxide ceramic terminals thick film silver electrical specifications resistance range: 50 ohms, 2% frequency range; dc ? 2.0 ghz power: 25 watts vswr 1.25:1 dc ? 2.0 ghz note: tolerance is 0.010?, unless otherwise specified. designed to mee t of exceed applicable portions of mil-e-5400. operating temperature is -55oc to 125oc (see chart for derating temperatures). all dimensions in inches. specifications subject to change with out notice. outline drawing 250375-4Z50-2 (097) rev a
usa/canada: toll free: europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 available on tape and reel for pick and place manufacturing. model 250 375 - 4z50 - 2 typical performance: power de-rating: mounting footprint and procedure: 1. solder part in place using 60/40 type solder wit h temperature controlled iron (700f). 2. drill thermal vias through pcb and fill with sol der, such as 60/40 type. 3. to ensure good thermal connectivity to heat sink , drill and tap heatsink and mount pcb board to heat sink using screws. 250375-4Z50-2 (097) rev a
|