View QPA1011_8937100.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 1 of 25 - www.qorvo.com product description qorvo?s QPA1011 is a x- band high power mmic amplifier fabricated on qorvo?s productio n 0.15um gan on sic process (qgan15). the QPA1011 operates from 7.9 ? 1 1 ghz and typically provides 25 w saturated output po w er with power -added efficiency of 37.5% and large- signal gain of 19.5 db. this combination of wideband performance provides the flexibility designers are looking for to improve system performance while reducing size and cost. QPA1011 can also support a variety of operating conditions to best support system requirements. with good the rmal properties, it can support a range of bias voltages and will perform well under both cw and pulse operations. the QPA1011 is matched to 50 with integrated dc blocking capacitors on both rf i/o ports simplifyin g system integration. the wideband performance and operational flexibility allows it support satellite communication and data links, as well as, military and commercial radar sy stems. lead-free and rohs compliant. evaluation boards are available upon request. ordering information part no. eccn description QPA1011 3a001.b.2.b.2 7.9 ? ? ? 11 ? ghz 25 ? w gan power amplifier functional block diagram product features ? frequency range: 7.9 ? ? ? 11 ? ghz ? p out : 44.5 ? dbm at p in = 25 ? dbm ? pae: 37.5 ? % at p in = 25 ? dbm ? large signal gain: 19.5 db at p in = 25 dbm ? small signal gain: 26 db ? integrated power detector ? bias: v d = 24 ? v, i dq = 1200 ma, v g = ?1.9 ? v typical ? pulsed v d : pw =100 s, dc = 10% ? package dimensions: 4.5 x 5.0 x 1.72 ? mm performance is typical across frequency. please reference electrical specification table and data p lots for more details. applications ? satellite communications ? data links ? military and commercial radar
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 2 of 25 - www.qorvo.com absolute maximum ratings parameter value ? / ? range drain voltage (v d ) 29.5 v gate voltage range (v g ) ?8 to 0v drain current (i d1 /i d2 ) 672 ma / 2880 ma gate current (i g ) see chart, pg. 21 power dissipation (p diss ), 85c, cw 70 w input power (p in ), cw, 50 , v d =28 v, i dq =1200 ma, 85 c 30 dbm input power (p in ), cw, vswr 3:1, v d =28 v, i dq =1200 ma 85 c 30 dbm channel temperature (t ch ) 275 c mounting temperature (30 seconds) 260 c storage temperature ?55 to 150 c operation of this device outside the parameter rang es given above may cause permanent damage. these are stress ratings only, and functional operation of the device at the se conditions is not implied. recommended operating conditions parameter value ? / ? range drain voltage (v d ) 24 v drain current (i dq ) 1200 ma gate voltage (v g ), typical ?1.9 v electrical specifications are measured at specified test conditions. specifications are not guaranteed over all recommended operating conditions. electrical specifications parameter min typ max units operational frequency range 7.9 11 ghz output power (p in = 25 ? dbm) 7.9 ghz 9.0 ghz 11.0 ghz 44.2 45.0 44.8 dbm dbm dbm power added efficiency (p in = 25 ? dbm) 7.9 ghz 9.0 ghz 11.0 ghz 35.6 38.7 39.4 % % % 3 rd order intermodulation level 7.9 ghz (p out /tone= 38 dbm) 10.0 ghz 11.0 ghz ?20.0 ?21.2 ?21.5 dbc dbc dbc small signal gain 7.9 ghz 9.0 ghz 11.0 ghz 29.0 28.8 28.0 db db db input return loss 7.9 ghz 9.0 ghz 11.0 ghz 13.5 30.0 17.5 db db db output return loss 7.9 ghz 9.0 ghz 11.0 ghz 9.0 10.0 16.0 db db db output power temperature coefficient (25 ? ? ? 85 c) ( p in = 25 ? dbm ) ?0.006 db/c small signal gain temperature coefficient (25 ? ? ? 85 c) ?0.053 db/c recommended voltage operations 24 28 v test conditions, unless otherwise noted: 25 c, pul sed v d : pw = 100 s, dc = 10%, v d = 24 v, i dq = 1200 ma, v g = ?1.9 v typical
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 3 of 25 - www.qorvo.com performance plots ? ? ? large signal (pulsed) 41 42 43 44 45 46 47 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 output power (dbm) frequency (ghz) output power vs. frequency vs. temp. - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, p in = 25 dbm pulsed v d : pw = 100 s, dc = 10% 20 25 30 35 40 45 50 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 power added eff. (%) frequency (ghz) power added eff. vs. frequency vs. temp. - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, p in = 25 dbm pulsed v d : pw = 100 s, dc = 10% 1000 1500 2000 2500 3000 3500 4000 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 drain current (ma) frequency (ghz) drain current vs. frequency vs. temp. - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, p in = 25 dbm pulsed v d : pw = 100 s, dc = 10% -0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 gate current (ma) frequency (ghz) gate current vs. frequency vs. temp. - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, p in = 25 dbm pulsed v d : pw = 100 s, dc = 10% 40 41 42 43 44 45 46 47 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 output power (dbm) frequency (ghz) output power vs. frequency vs. v d 18 v 20 v 22 v 24 v 26 v 28 v p in = 25 dbm, i dq = 1200 ma, temp. = 25 c pulsed v d : pw = 100 s, dc = 10% 20 25 30 35 40 45 50 55 60 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 power added eff. (%) frequency (ghz) power added eff. vs. frequency vs. v d 18 v 20 v 22 v 24 v 26 v 28 v p in = 25 dbm, i dq = 1200 ma, temp. = 25 c pulsed v d : pw = 100 s, dc = 10%
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 4 of 25 - www.qorvo.com performance plots ? ? ? large signal (pulsed) 500 1000 1500 2000 2500 3000 3500 4000 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 drain current (ma) frequency (ghz) drain current. vs. frequency vs. v d 18 v 20 v 22 v 24 v 26 v 28 v p in = 25 dbm, i dq = 1200 ma, temp. = 25 c pulsed v d : pw = 100 s, dc = 10% -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 gate current (ma) frequency (ghz) gate current. vs. frequency vs. v d 18 v 20 v 22 v 24 v 26 v 28 v p in = 25 dbm, i dq = 1200 ma, temp. = 25 c pulsed v d : pw = 100 s, dc = 10% 41 42 43 44 45 46 47 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 output power (dbm) frequency (ghz) output power vs. frequency vs. i dq 600 ma 1200 ma p in = 25 dbm, v d = 24 v, temp. = 25 c pulsed v d : pw = 100 s, dc = 10% 20 25 30 35 40 45 50 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 power added eff. (%) frequency (ghz) power added eff. vs. frequency vs. i dq 600 ma 1200 ma p in = 25 dbm, v d = 24 v, temp. = 25 c pulsed v d : pw = 100 s, dc = 10% 1000 1500 2000 2500 3000 3500 4000 4500 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 drain current (ma) frequency (ghz) drain current. vs. frequency vs. i dq 600 ma 1200 ma p in = 25 dbm, v d = 24 v, temp. = 25 c pulsed v d : pw = 100 s, dc = 10% -0.2 0.0 0.2 0.4 0.6 0.8 1.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 gate current (ma) frequency (ghz) gate current. vs. frequency vs. i dq 600 ma 1200 ma p in = 25 dbm, v d = 24 v, temp. = 25 c pulsed v d : pw = 100 s, dc = 10%
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 5 of 25 - www.qorvo.com performance plots ? ? ? large signal (pulsed) 25 27 29 31 33 35 37 39 41 43 45 47 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 output power (dbm) input power (dbm) output power vs. input power vs. temp. -40c +25c +85c v d = 24 v, i dq = 1200 ma, freq. = 9 ghz pulsed v d : pw = 100 s, dc = 10% 0 5 10 15 20 25 30 35 40 45 50 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 power added eff. (%) input power (dbm) pae vs. input power vs. temp. -40c +25c +85c v d = 24 v, i dq = 1200 ma, freq. = 9 ghz pulsed v d : pw = 100 s, dc = 10% 500 1000 1500 2000 2500 3000 3500 4000 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 drain current (ma) input power (dbm) drain current vs. input power vs. temp. -40c +25c +85c v d = 24 v, i dq = 1200 ma, freq. = 9 ghz pulsed v d : pw = 100 s, dc = 10% -0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 gate current (ma) input power (dbm) gate current vs. input power vs. temp. -40c +25c +85c v d = 24 v, i dq = 1200 ma, freq. = 9 ghz pulsed v d : pw = 100 s, dc = 10% 27 29 31 33 35 37 39 41 43 45 47 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 output power (dbm) input power (dbm) output power vs. input power vs. freq. 7.9 ghz 8.0 ghz 9.0 ghz 10.0 ghz 11.0 ghz v d = 24 v, i dq = 1200 ma, temp. = 25 c pulsed v d : pw = 100 s, dc = 10% 0 5 10 15 20 25 30 35 40 45 50 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 power added eff. (%) input power (dbm) pae vs. input power vs. freq. 7.9 ghz 8.0 ghz 9.0 ghz 10.0 ghz 11.0 ghz v d = 24 v, i dq = 1200 ma, temp. = 25 c pulsed v d : pw = 100 s, dc = 10%
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 6 of 25 - www.qorvo.com performance plots ? ? ? large signal (pulsed) 500 1000 1500 2000 2500 3000 3500 4000 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 drain current (ma) input power (dbm) drain current vs. input power vs. freq. 7.9 ghz 8.0 ghz 9.0 ghz 10.0 ghz 11.0 ghz v d = 24 v, i dq = 1200 ma, temp. = 25 c pulsed v d : pw = 100 s, dc = 10% -1 0 1 2 3 4 5 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 gate current (ma) input power (dbm) gate current vs. input power vs. freq. 7.9 ghz 8.0 ghz 9.0 ghz 10.0 ghz 11.0 ghz v d = 24 v, i dq = 1200 ma, temp. = 25 c pulsed v d : pw = 100 s, dc = 10% 25 27 29 31 33 35 37 39 41 43 45 47 49 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 output power (dbm) input power (dbm) output power vs. input power vs. v d 18 v 20 v 22 v 24 v 26 v 28 v i dq = 1200 ma, freq. = 9 ghz, temp. = 25 c pulsed v d : pw = 100 s, dc = 10% 0 5 10 15 20 25 30 35 40 45 50 55 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 power added eff. (%) input power (dbm) power added eff. vs. input power vs. v d 18 v 20 v 22 v 24 v 26 v 28 v i dq = 1200 ma, freq. = 9 ghz, temp. = 25 c pulsed v d : pw = 100 s, dc = 10% 1000 1500 2000 2500 3000 3500 4000 4500 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 drain current (ma) input power (dbm) drain current vs. input power vs. v d 18 v 20 v 22 v 24 v 26 v 28 v i dq = 1200 ma, freq. = 9 ghz, temp. = 25 c pulsed v d : pw = 100 s, dc = 10% -1 0 1 2 3 4 5 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 gate current (ma) input power (dbm) gate current vs. input power vs. v d 18 v 20 v 22 v 24 v 26 v 28 v i dq = 1200 ma, freq. = 9 ghz, temp. = 25 c pulsed v d : pw = 100 s, dc = 10%
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 7 of 25 - www.qorvo.com performance plots ? ? ? large signal (cw) 41 42 43 44 45 46 47 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 output power (dbm) frequency (ghz) output power vs. frequency vs. temp. - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, p in = 25 dbm 20 25 30 35 40 45 50 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 power added eff. (%) frequency (ghz) power added eff. vs. frequency vs. temp. - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, p in = 25 dbm 500 1000 1500 2000 2500 3000 3500 4000 4500 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 drain current (ma) frequency (ghz) drain current vs. frequency vs. temp. - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, p in = 25 dbm -1.0 -0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 gate current (ma) frequency (ghz) gate current vs. frequency vs. temp. - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, p in = 25 dbm 0.0 0.5 1.0 1.5 2.0 2.5 3.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 v delta (v) frequency (ghz) v delta vs. frequency vs. temp. - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, p in = 25 dbm v delta = v ref - v det
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 8 of 25 - www.qorvo.com performance plots ? ? ? large signal (cw) 40 41 42 43 44 45 46 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 output power (dbm) frequency (ghz) output power vs. frequency vs. v d 18 v 20 v 22 v 24 v 26 v 28 v p in = 25 dbm, i dq = 1200 ma, temp. = 25 c 20 25 30 35 40 45 50 55 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 power added eff. (%) frequency (ghz) power added eff. vs. frequency vs. v d 18 v 20 v 22 v 24 v 26 v 28 v p in = 25 dbm, i dq = 1200 ma, temp. = 25 c 500 1000 1500 2000 2500 3000 3500 4000 4500 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 drain current (ma) frequency (ghz) drain current. vs. frequency vs. v d 18 v 20 v 22 v 24 v 26 v 28 v p in = 25 dbm, i dq = 1200 ma, temp. = 25 c -0.2 0.0 0.2 0.4 0.6 0.8 1.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 gate current (ma) frequency (ghz) gate current. vs. frequency vs. v d 18 v 20 v 22 v 24 v 26 v 28 v p in = 25 dbm, i dq = 1200 ma, temp. = 25 c 0.0 0.5 1.0 1.5 2.0 2.5 3.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 v delta (v) frequency (ghz) v delta vs. frequency vs. v d 18 v 20 v 22 v 24 v 26 v 28 v p in = 25 dbm, i dq = 1200 ma, temp. = 25 c v delta = v ref - v det
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 9 of 25 - www.qorvo.com performance plots ? ? ? large signal (cw) 41 42 43 44 45 46 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 output power (dbm) frequency (ghz) output power vs. frequency vs. i dq 600 ma 1200 ma p in = 25 dbm, v d = 24 v, temp. = 25 c 25 30 35 40 45 50 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 power added eff. (%) frequency (ghz) power added eff. vs. frequency vs. i dq 600 ma 1200 ma p in = 25 dbm, v d = 24 v, temp. = 25 c 500 1000 1500 2000 2500 3000 3500 4000 4500 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 drain current (ma) frequency (ghz) drain current. vs. frequency vs. i dq 600 ma 1200 ma p in = 25 dbm, v d = 24 v, temp. = 25 c -0.1 0.0 0.1 0.2 0.3 0.4 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 gate current (ma) frequency (ghz) gate current. vs. frequency vs. i dq 600 ma 1200 ma p in = 25 dbm, v d = 24 v, temp. = 25 c 0.0 0.5 1.0 1.5 2.0 2.5 3.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 v delta (v) frequency (ghz) v delta vs. frequency vs. i dq 600 ma 1200 ma p in = 25 dbm, v d = 24 v, temp. = 25 c v delta = v ref - v det
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 10 of 25 - www.qorvo.com performance plots ? ? ? large signal (cw) 23 25 27 29 31 33 35 37 39 41 43 45 47 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 output power (dbm) input power (dbm) output power vs. input power vs. temp. -40c +25c +85c v d = 24 v, i dq = 1200 ma, freq. = 9 ghz 0 5 10 15 20 25 30 35 40 45 50 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 power added eff. (%) input power (dbm) pae vs. input power vs. temp. -40c +25c +85c v d = 24 v, i dq = 1200 ma, freq. = 9 ghz 500 1000 1500 2000 2500 3000 3500 4000 4500 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 drain current (ma) input power (dbm) drain current vs. input power vs. temp. -40c +25c +85c v d = 24 v, i dq = 1200 ma, freq. = 9 ghz -5 0 5 10 15 20 25 30 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 gate current (ma) input power (dbm) gate current vs. input power vs. temp. -40c +25c +85c v d = 24 v, i dq = 1200 ma, freq. = 9 ghz -0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 v delta (v) input power (dbm) v delta vs. input power vs. temp. -40c +25c +85c v d = 24 v, i dq = 1200 ma, freq. = 9 ghz v delta = v ref - v det
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 11 of 25 - www.qorvo.com performance plots ? ? ? large signal (cw) 25 27 29 31 33 35 37 39 41 43 45 47 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 output power (dbm) input power (dbm) output power vs. input power vs. freq. 7.9 ghz 8.0 ghz 9.0 ghz 10.0 ghz 11.0 ghz v d = 24 v, i dq = 1200 ma, temp. = 25 c 0 5 10 15 20 25 30 35 40 45 50 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 power added eff. (%) input power (dbm) pae vs. input power vs. freq. 7.9 ghz 8.0 ghz 9.0 ghz 10.0 ghz 11.0 ghz v d = 24 v, i dq = 1200 ma, temp. = 25 c 500 1000 1500 2000 2500 3000 3500 4000 4500 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 drain current (ma) input power (dbm) drain current vs. input power vs. freq. 7.9 ghz 8.0 ghz 9.0 ghz 10.0 ghz 11.0 ghz v d = 24 v, i dq = 1200 ma, temp. = 25 c -2 0 2 4 6 8 10 12 14 16 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 gate current (ma) input power (dbm) gate current vs. input power vs. freq. 7.9 ghz 8.0 ghz 9.0 ghz 10.0 ghz 11.0 ghz v d = 24 v, i dq = 1200 ma, temp. = 25 c -1.0 -0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 v delta (v) input power (dbm) v delta vs. input power vs. freq. 7.9 ghz 8.0 ghz 9.0 ghz 10.0 ghz 11.0 ghz v d = 24 v, i dq = 1200 ma, temp. = 25 c v delta = v ref - v det
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 12 of 25 - www.qorvo.com performance plots ? ? ? large signal (cw) 25 27 29 31 33 35 37 39 41 43 45 47 49 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 output power (dbm) input power (dbm) output power vs. input power vs. v d 18 v 20 v 22 v 24 v 26 v 28 v i dq = 1200 ma, freq. = 9 ghz, temp. = 25 c 0 5 10 15 20 25 30 35 40 45 50 55 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 power added eff. (%) input power (dbm) power added eff. vs. input power vs. v d 18 v 20 v 22 v 24 v 26 v 28 v i dq = 1200 ma, freq. = 9 ghz, temp. = 25 c 500 1000 1500 2000 2500 3000 3500 4000 4500 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 drain current (ma) input power (dbm) drain current vs. input power vs. v d 18 v 20 v 22 v 24 v 26 v 28 v i dq = 1200 ma, freq. = 9 ghz, temp. = 25 c -5 0 5 10 15 20 25 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 gate current (ma) input power (dbm) gate current vs. input power vs. v d 18 v 20 v 22 v 24 v 26 v 28 v i dq = 1200 ma, freq. = 9 ghz, temp. = 25 c -0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 v delta (v) input power (dbm) v delta vs. input power vs. v d 18 v 20 v 22 v 24 v 26 v 28 v i dq = 1200 ma, freq. = 9 ghz, temp. = 25 c v delta = v ref - v det
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 13 of 25 - www.qorvo.com performance plots ? ? ? linearity performance plots ? ? ? linearity -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 20 22 24 26 28 30 32 34 36 38 40 42 im5 (dbc) output power per tone (dbm) im5 vs. output power vs. temperature - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, freq. = 7.9 ghz, ? f = 1 mhz -60 -50 -40 -30 -20 -10 0 20 22 24 26 28 30 32 34 36 38 40 42 im3 (dbc) output power per tone (dbm) im3 vs. output power vs. temperature - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, freq. = 10 ghz, ? f = 1 mhz -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 20 22 24 26 28 30 32 34 36 38 40 42 im5 (dbc) output power per tone (dbm) im5 vs. output power vs. temperature - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, freq. = 10 ghz, ? f = 1 mhz -60 -50 -40 -30 -20 -10 0 20 22 24 26 28 30 32 34 36 38 40 42 im3 (dbc) output power per tone (dbm) im3 vs. output power vs. temperature - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, freq. = 11 ghz, ? f = 1 mhz -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 20 22 24 26 28 30 32 34 36 38 40 42 im5 (dbc) output power per tone (dbm) im5 vs. output power vs. temperature - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, freq. = 11 ghz, ? f = 1 mhz -60 -50 -40 -30 -20 -10 0 20 22 24 26 28 30 32 34 36 38 40 42 im3 (dbc) output power per tone (dbm) im3 vs. output power vs. temperature - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, freq. = 7.9 ghz, ? f = 1 mhz
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 14 of 25 - www.qorvo.com performance plots ? ? ? linearity -60 -50 -40 -30 -20 -10 0 24 26 28 30 32 34 36 38 40 42 im3 (dbc) output power per tone (dbm) im3 vs. output power vs. v d 18 v 20 v 22 v 24 v 26 v 28 v freq. = 7.9 ghz, temp. = 25 c, ? f = 1 mhz i dq = 1200 ma -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 24 26 28 30 32 34 36 38 40 42 im5 (dbc) output power per tone (dbm) im5 vs. output power vs. v d 18 v 20 v 22 v 24 v 26 v 28 v freq. = 7.9 ghz, temp. = 25 c, ? f = 1 mhz i dq = 1200 ma -60 -50 -40 -30 -20 -10 0 24 26 28 30 32 34 36 38 40 42 im3 (dbc) output power per tone (dbm) im3 vs. output power vs. v d 18 v 20 v 22 v 24 v 26 v 28 v freq. = 10 ghz, temp. = 25 c, ? f = 1 mhz i dq = 1200 ma -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 24 26 28 30 32 34 36 38 40 42 im5 (dbc) output power per tone (dbm) im5 vs. output power vs. v d 18 v 20 v 22 v 24 v 26 v 28 v freq. = 10 ghz, temp. = 25 c, ? f = 1 mhz i dq = 1200 ma -60 -50 -40 -30 -20 -10 0 24 26 28 30 32 34 36 38 40 42 im3 (dbc) output power per tone (dbm) im3 vs. output power vs. v d 18 v 20 v 22 v 24 v 26 v 28 v freq. = 11 ghz, temp. = 25 c, ? f = 1 mhz i dq = 1200 ma -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 24 26 28 30 32 34 36 38 40 42 im5 (dbc) output power per tone (dbm) im5 vs. output power vs. v d 18 v 20 v 22 v 24 v 26 v 28 v freq. = 11 ghz, temp. = 25 c, ? f = 1 mhz i dq = 1200 ma
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 15 of 25 - www.qorvo.com performance plots ? ? ? linearity -60 -50 -40 -30 -20 -10 0 24 26 28 30 32 34 36 38 40 42 im3 (dbc) output power per tone (dbm) im3 vs. output power vs. i dq 600 ma 1200 ma v d = 24 v, freq. = 7.9 ghz, temp. = 25 c, ? f = 1 mhz -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 24 26 28 30 32 34 36 38 40 42 im5 (dbc) output power per tone (dbm) im5 vs. output power vs. i dq 600 ma 1200 ma v d = 24 v, freq. = 7.9 ghz, temp. = 25 c, ? f = 1 mhz -60 -50 -40 -30 -20 -10 0 24 26 28 30 32 34 36 38 40 42 im3 (dbc) output power per tone (dbm) im3 vs. output power vs. i dq 600 ma 1200 ma v d = 24 v, freq. = 10 ghz, temp. = 25 c, ? f = 1 mhz -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 24 26 28 30 32 34 36 38 40 42 im5 (dbc) output power per tone (dbm) im5 vs. output power vs. i dq 600 ma 1200 ma v d = 24 v, freq. = 10 ghz, temp. = 25 c, ? f = 1 mhz -60 -50 -40 -30 -20 -10 0 24 26 28 30 32 34 36 38 40 42 im3 (dbc) output power per tone (dbm) im3 vs. output power vs. i dq 600 ma 1200 ma v d = 24 v, freq. = 11 ghz, temp. = 25 c, ? f = 1 mhz -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 24 26 28 30 32 34 36 38 40 42 im5 (dbc) output power per tone (dbm) im5 vs. output power vs. i dq 600 ma 1200 ma v d = 24 v, freq. = 11 ghz, temp. = 25 c, ? f = 1 mhz
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 16 of 25 - www.qorvo.com performance plots ? ? ? linearity 0 10 20 30 40 50 60 70 80 -80 -70 -60 -50 -40 -30 -20 -10 0 24 26 28 30 32 34 36 38 40 42 pae (%) im3 (dbc) output power per tone (dbm) im3 vs. pae vs. output power 18 v 20 v 22 v 24 v 26 v 28 v freq. = 7.9 ghz, temp. = 25 c, ? f = 1 mhz im3 pae i dq = 1200 ma 0 10 20 30 40 50 60 70 -70 -60 -50 -40 -30 -20 -10 0 24 26 28 30 32 34 36 38 40 42 pae (%) im3 (dbc) output power per tone (dbm) im3 vs. pae vs. output power 600 ma 1200 ma v d = 24 v, freq. = 7.9 ghz, temp. = 25 c, ? f = 1 mhz im3 pae
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 17 of 25 - www.qorvo.com performance plots ? ? ? harmonics -60 -50 -40 -30 -20 -10 0 22 24 26 28 30 32 34 36 38 40 42 44 46 harmonic level (dbc) output power (dbm) 2nd harmonic vs. p out vs. temp. - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, f 0 = 7.9 ghz -60 -50 -40 -30 -20 -10 0 26 28 30 32 34 36 38 40 42 44 46 harmonic level (dbc) output power (dbm) 2nd harmonic vs. p out vs. v d 20 v 24 v 28 v i dq = 1200 ma, temp. = 25 c, f 0 = 7.9 ghz -60 -50 -40 -30 -20 -10 0 22 24 26 28 30 32 34 36 38 40 42 44 46 harmonic level (dbc) output power (dbm) 2nd harmonic vs. p out vs. temp. - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, f 0 = 10 ghz -60 -50 -40 -30 -20 -10 0 26 28 30 32 34 36 38 40 42 44 46 harmonic level (dbc) output power (dbm) 2nd harmonic vs. p out vs. v d 20 v 24 v 28 v i dq = 1200 ma, temp. = 25 c, f 0 = 10 ghz -60 -50 -40 -30 -20 -10 0 22 24 26 28 30 32 34 36 38 40 42 44 46 harmonic level (dbc) output power (dbm) 2nd harmonic vs. p out vs. temp. - 40 c +25 c +85 c v d = 24 v, i dq = 1200 ma, f 0 = 11 ghz -60 -50 -40 -30 -20 -10 0 26 28 30 32 34 36 38 40 42 44 46 harmonic level (dbc) output power (dbm) 2nd harmonic vs. p out vs. v d 20 v 24 v 28 v i dq = 1200 ma, temp. = 25 c, f 0 = 11 ghz
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 18 of 25 - www.qorvo.com performance plots ? ? ? small signal 0 5 10 15 20 25 30 35 7 8 9 10 11 12 s21 (db) frequency (ghz) gain vs. frequency vs. temperature -40c +25c +85c v d = 24 v, i dq = 1200 ma 0 5 10 15 20 25 30 35 7 8 9 10 11 12 s21 (db) frequency (ghz) gain vs. frequency vs. v d 18 v 20 v 22 v 24 v 26 v 28 v temp. = 25 c, i dq = 1200 ma -30 -25 -20 -15 -10 -5 0 7 8 9 10 11 12 s11 (db) frequency (ghz) input return loss vs. freq. vs. temp. -40c +25c +85c v d = 24 v, i dq = 1200 ma -30 -25 -20 -15 -10 -5 0 7 8 9 10 11 12 s11 (db) frequency (ghz) input return loss vs. frequency vs. v d 18 v 20 v 22 v 24 v 26 v 28 v temp. = 25 c, i dq = 1200 ma -30 -25 -20 -15 -10 -5 0 7 8 9 10 11 12 s22 (db) frequency (ghz) output return loss vs. freq. vs. temp. -40c +25c +85c v d = 24 v, i dq = 1200 ma -30 -25 -20 -15 -10 -5 0 7 8 9 10 11 12 s22 (db) frequency (ghz) output return loss vs. frequency vs. v d 18 v 20 v 22 v 24 v 26 v 28 v temp. = 25 c, i dq = 1200 ma
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 19 of 25 - www.qorvo.com performance plots ? ? ? small signal 0 5 10 15 20 25 30 35 7 8 9 10 11 12 s21 (db) frequency (ghz) gain vs. frequency vs. i dq 600 ma 1200 ma v d = 24 v, temp. = 25 c -30 -25 -20 -15 -10 -5 0 7 8 9 10 11 12 s11 (db) frequency (ghz) input return loss vs. frequency vs. i dq 600 ma 1200 ma v d = 24 v, temp. = 25 c -30 -25 -20 -15 -10 -5 0 6 7 8 9 10 11 12 s22 (db) frequency (ghz) output return loss vs. frequency vs. i dq 600 ma 1200 ma v d = 24 v, temp. = 25 c
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 20 of 25 - www.qorvo.com thermal and reliability information parameter test conditions value units thermal resistance ( jc ) (1) t base ? = ? 85 ? c, v d ? = ? +24 ? v, i dq ? = ? 1200 ? ma, pulsed v d : pw = 100 us; dc = 10%, freq ? = ? 9.75 ? ghz, p in ? = ? 25 ? dbm, i d_drive ? = ? 3.3 a, p out ? = ? 44.7 dbm, p diss ? = ? 48.9 w 1.49 c/w channel temperature (t ch ) (under rf drive) 158 c median lifetime (t m ) 3.6e +09 hrs thermal resistance ( jc ) (1) t base ? = ? 85c, v d ? = ? +24v, i dq ? = ? 1200 ma, cw, p diss ? = ? 28.8 ? w 2.13 c/w channel temperature (t ch ) (quiescent, no rf) 147 c median lifetime (t m ) 1.2e 10 hrs thermal resistance ( jc ) (1) t base ? = ? 85 ? c, v d ? = ? +24 ? v, i dq ? = ? 1200 ? ma, cw, freq ? = ? 9.75 ? ghz, p in ? = ? 25 ? dbm, i d_drive ? = ? 2.9 a, p out ? = ? 44.2 dbm, p diss ? = 44.7 w 2.08 c/w channel temperature (t ch ) (under rf drive) 178 c median lifetime (t m ) 4.7e +08 hrs thermal resistance ( jc ) (1) t base ? = ? 85 ? c, v d ? = ? +20 ? v, i dq ? = ? 1200 ? ma, pulsed v d : pw = 100 us; dc = 10%, freq ? = ? 9.25 ? ghz, p in ? = ? 25 ? dbm, i d_drive ? = ? 3.0 a, p out ? = ? 44.1 dbm, p diss ? = ? 34.6 w 1.39 c/w channel temperature (t ch ) (under rf drive) 133 c median lifetime (t m ) 6.0e +10 hrs thermal resistance ( jc ) (1) t base ? = ? 85c, v d ? = ? +20v, i dq ? = ? 1200 ma, cw, p diss ? = ? 24 ? w 2.13 c/w channel temperature (t ch ) (quiescent, no rf) 136 c median lifetime (t m ) 4.2e +10 hrs thermal resistance ( jc ) (1) t base ? = ? 85 ? c, v d ? = ? +20 ? v, i dq ? = ? 1200 ? ma, cw, freq ? = ? 9.5ghz, p in ? = ? 25 ? dbm, i d_drive ? = ? 2.8 a, p out ? = ? 43.7 dbm, p diss ? = ? 33 w 1.94 c/w channel temperature (t ch ) (under rf drive) 149 c median lifetime (t m ) 9.4e +09 hrs notes: 1. thermal resistance is measured to the package ba ckside.
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 21 of 25 - www.qorvo.com median lifetime median life test conditions: v d = +28 ? v; failure criteria = 10 ? % reduction in i d_max during dc life testing 0 10 20 30 40 50 60 70 80 90 100 120 130 140 150 160 170 180 190 200 210 220 230 gate current maximum (ma) channel temperature, t ch ( c) QPA1011 ig_max vs. t ch vs. stage stage 1 stage 2 total 0 10 20 30 40 50 60 70 80 90 100 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 power dissipation (w) frequency (ghz) p diss vs. frequency vs. v d 18 v 20 v 22 v 24 v 26 v 28 v p in = 25 dbm, i dq = 1200 ma, temp. = 85 c pulsed v d : pw = 100 s, dc = 10% 0 10 20 30 40 50 60 70 80 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 power dissipation (w) frequency (ghz) p diss vs. frequency vs. v d 18 v 20 v 22 v 24 v 26 v 28 v p in = 25 dbm, i dq = 1200 ma, temp. = 85 c, cw 1e+04 1e+05 1e+06 1e+07 1e+08 1e+09 1e+10 1e+11 1e+12 1e+13 1e+14 1e+15 75 100 125 150 175 200 225 250 275 median lifetime, t m (hours) channel temperature, t ch ( c) (qgan15) median lifetime vs. t ch fet16
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 22 of 25 - www.qorvo.com applications circuit for linear and pulsed operatio ns note: v delta = v ref - v det ? QPA1011 can be biased from either the top side or bottom side. ? v d1 and v d2 need to be tied together ? v d1 / v d2 and v ref / v det have to be on the same side for v delta to work. ? bypassing components required for the side(s) bein g biased. ? the extra bias components (r6, r17, c5 and c14) ar e required for optimum linearity. bias up procedure 1. set i d limit to 4000 ma, i g limit to 20 ? ma 2. apply ?5 ? v to v g 3. apply +24 ? v to v d ; ensure i dq is approx. 0 ? ma 4. adjust v g until i dq = 1200 ? ma (v g ~ ?1.9 v typ.). 5. turn on rf supply bias down procedure 1. turn off rf supply 2. reduce v g to ?5 ? v; ensure i dq is approx. 0 ? ma 3. set v d to 0 ? v 4. turn off v d supply 5. turn off v g supply
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 23 of 25 - www.qorvo.com note: 1. these components are acting as the jumpers for this evb. bill of materials for evb reference des. value description manuf. part number c1, c5, c10, c14 10 ? uf cap, 1206, 50 ? v, 20 ? %, x5r various ? c2, c6, c9, c13 0.01 ? uf cap, 0402, 50 ? v, 10 ? %, x7r various ? r1, r12 5.1 ? ohm res, 0402, 50v, 5 ? %, smt various ? r2, r3, r6, r7, r11, r15, r16, r17 (1) 0 ohm res, 0402, 5 ? %, smd various ? r8, r9, r18, r19 25.5 k ohm res, 0402, 1/16w, 1%, 0402 various ? l1, l2 (1) 0 ohm res, 0603, 1/10 w various ? evaluation board (evb) layout assembly for pulsed o peration note: pcb is a multilayer 1. all 4 metal thicknesses are 0.5 oz 2. upper core 1 is rogers 4003c, 8 mil thick 3. lower core 2 is 370hr, 6 mil thick 4. pre-preg is an epoxy coated glass fabric 5. total finished pcb thickness is 25 3 mil 6. this evb uses a copper-coined pcb for optimum th ermal management under high dissipation long pulse and/or cw conditions
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 24 of 25 - www.qorvo.com mechanical information units: millimeters tolerances: unless specified x.xx = 0.25 x.xxx = 0.100 materials: base: laminate lid: fr4 all metalized features are gold plated part is epoxy sealed marking: QPA1011: part number yy: part assembly year ww: part assembly week mxxx: batch id pin description pad no. symbol description 1, 3, 13, 15, center gnd ground. must be grounded on the pcb. conductive fil led vias recommended for least inductance and improved thermal performan ce 2 rf in rf input; matched to 50 ; dc blocked 4, 7, 21, 24 n/c not connected internally. recommended to be ground ed 5, 23 v g1-2 stage 1-2 gate voltage. bias network is required; s ee recommended application information above on page 21 6, 22 v d1 stage 1 drain voltage. bias network is required; see recommended application information above on page 21 8 ? 10, 18 - 20 v d2 stage 2 drain voltage; bias network is required; mu st be biased from both sides; see recommended application information abov e on page 21 11, 17 v ref reference voltage 12, 16 v det detector voltage 14 rf out rf output; matched to 50 ; dc blocked
QPA1011 7.9 ? ? 11.0 ? ghz 25 ? w gan power amplifie r data sheet rev. c, march 10, 2017 | subject to chan ge without notice - 25 of 25 - www.qorvo.com handling precautions parameter rating standard caution! esd-sensitive device esd ? ? ? human body model (hbm) tbd esda ? / ? jedec js-001-2012 esd ? ? ? charged device model (cdm) tbd esda ? / ? jedec js-002-2014 msl ? ? ? convection reflow 260 ? c tbd jedec standard ipc/jedec j-std-020 solderability compatible with the latest version of j-std-020, le ad-free solder, 260 ? c rohs compliance this product is compliant with the 2011/65/eu rohs directive (restrictions on the use of certain hazar dous substances in electrical and electronic equipment), as amended by directive 2015/863/eu. this product also has the fo llowing attributes: ? lead free ? antimony free ? tbbp-a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free ? qorvo green contact information for the latest specifications, additional product i nformation, worldwide sales and distribution locati ons: tel: 1-844-890-8163 web: www.qorvo.com email: customer.support@qorvo.com for technical questions and application information : email: sjcapplications.engineering@qorvo.com important notice the information contained herein is believed to be reliable; however, qorvo makes no warranties regarding the information contained herein and assumes no responsibility or liability w hatsoever for the use of the information contained herein. all information contained herein is subject to change without notice. custome rs shou ld obtain and verify the latest relevant informatio n before placing orders for qorvo products. the information contained herein or any use of such information does not grant, explic itly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard t o such information itself or anything described by such information. this information does not constitute a warranty wit h respect to the products described herein, and qorvo hereby disclaims any and all warranties with respect to such products whether express or implied by law, course of dealing, cours e of performance, usage of trade or otherwise, including the implied warranties of merchantability and fitness for a particular purpose. without limiting th e generality of the foregoing, qorvo products are n ot warranted or authorized for use as critical comp onents in medical, life-saving, or life-sustaining applications, or ot her applications where a failure would reasonably b e expected to cause severe person al injury or death. copyright 2016 ? qorvo, inc. | qorvo is a registere d trademark of qorvo, inc.

▲Up To Search▲

Price & Availability of QPA1011

	To Download QPA1011 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .