(1.27 mm) .050" ffsd series f-217 01 02 red wire opposite position #1. ?xx? 1/8" (101.60 mm) 4.00 min. (50.8 mm) 2.00 min. 3 3 1 2 = outside reverse Co = reverse Cr = strain relief Csr = middle reverse Cm mates with: fts, ftsh, ehf, shf, eshf for complete specifcations see www.samtec.com?ffsd insulator material: pbt contact: becu plating: 10 " (0.25 m) au over 50 " (1.27 m) ni on contact area; sn over 50 " (1.27 m) ni on balance wire: 30 awg current rating (ffsd/ftsh): 2.3 a per pin (1 pin powered per row) operating temp range: -40 c to +105 c lead size accepted: (0.41 mm) .016" sq contact resistance: 15 mw insertion depth: (2.64 mm) .104" to (3.17 mm) .125" rohs compliant: ye s specifications not available with Co, Cm, Cr or Cdxx requires Cdxx no. of positions x ( 1.27) .050 + (8.00) .315 = reverse wiring C rw = daisy chain Cd xx note: this series is non-standard, non-returnable. tiger eye ? flat idc wire cables requires Cdxx (mates only with eshf series) 3 assembled length in inches (1/8") 2 inches minimum type strip no. pins per row end option overall length 01 other option Cxx.xx = assembled length C04, C05, C06, C08, C10, C11, C12, C13, C15, C17, C20, C25 (standard sizes) n 01 no . of positions x (1.27) .050 + (4.19) .165 (3.05) .120 (5.08) .200 (1.27) .050 (1.90) .075 (1.02) .040 Cn = notch polarization notch option (not available with -04 position) Cs = single end ffsd = socket strip Cd = double end for complete scope of recognitions see www.samtec.com/quality recognitions also available (moq required) ? other sizes contact samtec. ? strain relief option ??????????????????? ? file no. e111594 ffsdC20CsC10.00C01Cn ffsdC10CdC02.00C01Cn www.samtec.com due to technical progress, all designs, specifcations and components are subject to change without notice.
|
