1575.42 mhz saw filter 45 mhz bandwidth part number: SF1575BA02627S spectrum microwave, inc. 400 nickerson road, marlborough, ma 01752, usa phone 508-251-6400 fax 508-251-6401 www.spectrummicrowave.com dsSF1575BA02627S rev x5 4-jan-11 page 1 of 3 description 1575.42 mhz saw bandpass filter with nominal 45 mhz bandwidth. 1.4 x 1.1 mm ceramic smp, 5 pads. rohs compliant. typical performance s11 (1425.42-1725.42 mhz) s22 (1425.42-1725.42 mhz) amp 10 db/div amp 0.2 db/div phase 20 deg/div delay 25 ns/div center = 1575.42 mhz, 30 mhz/div (187.5 khz incr)
1575.42 mhz saw filter 45 mhz bandwidth part number: SF1575BA02627S spectrum microwave, inc. 400 nickerson road, marlborough, ma 01752, usa phone 508-251-6400 fax 508-251-6401 www.spectrummicrowave.com dsSF1575BA02627S rev x5 4-jan-11 page 2 of 3 specification parameter min typ max units center frequency, fc 1 - 1575.4 2 - mhz maximum insertion loss (1574.42-1576.42 mhz ) - 1.3 1.6 db amplitude ripple (1574.42-1576.42 mhz) - 0.1 0.75 db p-p 2 db bandwidth - 40 - mhz in/out vswr (1574.42~1576.42 mhz) - 1.15 1.6 :1 attenuation (0.3~1450 mhz) 2 35 38 - db attenuation (1450~1520 mhz) 2 30 45 - db attenuation (1625~1640 mhz) 2 45 48 - db attenuation (1640~1805 mhz) 2 38 40 - db attenuation (1805~1910 mhz) 2 38 40 - db attenuation (1910~2000 mhz) 2 38 43 - db attenuation (2000~4000 mhz) 2 30 45 - db attenuation (4000~6000 mhz) 2 20 22 - db source/load impedance 50 ohms ambient temperature 25 ?c notes: 1. defined as the average of the lower and upper 3 db frequencies. 2. all db levels are defined relative to the inse rtion loss. maximum ratings parameter min max units storage temperature range -40 85 ?c operating temperature range -40 85 ?c input power level - 15 dbm dc voltage - 3 v matching circuit notes: 1. external matching components are not required. a c all other pads input 50 w single-ended output 50 w single-ended gnd gnd
1575.42 mhz saw filter 45 mhz bandwidth part number: SF1575BA02627S spectrum microwave, inc. 400 nickerson road, marlborough, ma 01752, usa phone 508-251-6400 fax 508-251-6401 www.spectrummicrowave.com dsSF1575BA02627S rev x5 4-jan-11 page 3 of 3 package outline marking iso 9001 registered units: mm tolerances are typically 0.15 mm except where indicated. pad configuration: input: c output: a to be grounded: all other pads all specifications are believed to be accurate and reliable. however, spectrum microwave reserves the right to make changes without notice. ? 2011 all rights reserved.
|