filename: TFR1701.doc version 4.0 18.01.2012 vectron international resonator specification tfr17 01 1/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh & co. kg reserves the ri ght to make changes to the product(s) and/or inform ation contained herein without notice. no liability is assumed as a result of the ir use or application. no rights under any patent accompany the sale of any such product(s) or information. measurement condition ambient temperature: 25 c input power level: 0 dbm terminating impedance: input: 50 output: 50 characteristics remark: the minimum of the attenuation a min is defined as the insertion loss a e . the centre frequency f r is the frequency of the serial resonance of the res onator. the frequency shift of the resonator in the operating t emperature range is not included in the production tolerance scheme. d a t a typ. value tolerance / limit insertion loss a e = a min 1,1 db max. 2,5 db (reference level) centre frequency f r 1701,963 mhz 60 ppm quality factor q unloaded 3400 min. 3000 parallel capacitance c 0 1,7 pf - motional resistance r m 18,3 - motional inductance l m 5,8 h - motional capacitance c m 1,5 ff - capacitance ratio c 0 / c m 1110 max. 1500 operating temperature range otr - - 40 c ... + 85 c storage temperature range - - 55 c ... + 90 c turnover temperature t 0 57 c - temperature coefficient of frequency tc f * -0,03 ppm/k 2 - *) ? f c (hz) = tc f (ppm/k 2 ) x (t ? t 0 ) 2 x f cat (mhz) generated: checked / approved:
filename: TFR1701.doc version 4.0 18.01.2012 vectron international resonator specification tfr17 01 2/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh & co. kg reserves the ri ght to make changes to the product(s) and/or inform ation contained herein without notice. no liability is assumed as a result of the ir use or application. no rights under any patent accompany the sale of any such product(s) or information. filter characteristic construction and pin connection (all dimensions in mm) 1 2 3 5 6 7 4 8 1,2 max. 0,6 3,0 +/-0,15 0,6 1,5 0,6 6 0 g r d . 1 3 7 5 date code 50 test circuit equivalent circuit 2 6 c 0 1699.15 1699.65 1700.15 1700.65 1701.15 1701.65 1702.15 1702.65 1703.15 1703.65 1704.15 -12 -10 -8 -6 -4 -2 0 m a g n i t u d e / d b frequency / mhz 1699.15 1699.65 1700.15 1700.65 1701.15 1701.65 1702.15 1702.65 1703.15 1703.65 1704.15 0 0.005 0.01 0.015 0.02 0.025 0.03 0.035 0.04 0.045 frequency / mhz c o n d u c t a n c e / s l1 saw l2 2 6 1, 3, 4, 5, 7, 8 r 1 l 1 c 1 k01 r c03 1 ground 2 input 3 ground 4 ground 5 ground 6 output 7 ground 8 ground date code: year + week c 2012 d 2013 e 2013 ...
filename: TFR1701.doc version 4.0 18.01.2012 vectron international resonator specification tfr17 01 3/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh & co. kg reserves the ri ght to make changes to the product(s) and/or inform ation contained herein without notice. no liability is assumed as a result of the ir use or application. no rights under any patent accompany the sale of any such product(s) or information. stability characteristics, reliability after the following tests the filter shall meet the whole specification: 1. shock: 500g, 1 ms, half sine wave, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5 g respe ctively, 1 octave per min, 10 cycles per plan, 3 pl ans; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 1 0 cycles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow): reflow possible: three ti mes max.; for temperature conditions refer to the attached " air reflow temperature conditions" on page 4; 5. esd mil-std-883e using coupling network of iso 1 0605 and en 6100-4-2 hbm:250v; cdm:v; this filter is rohs compliant (2002/95/eg, 2005/618 /eg) packing tape & reel: iec 286 ? 3, with exception of value f or n and minimum bending radius; tape type ii, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 9000 reel of empty components at start: min. 300 mm reel of empty components at start including leader : min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao pull off direction pin marker typ date code ko t a c n w 1 w 2 the minimum bending radius is 45 mm. tape (all dimensions in mm) w : 8,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 3,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 4,00 0,1 d1(min) : 1,50 ao : 3,25 0,1 bo : 3,25 0,1 ct : 5,5 0,1 reel (all dimensions in mm) a : 330 w1 : 8,4 +1,5/-0 w2(max) : 14,4 n(min) : 50 c : 13,0 +0,5/-0,2
filename: TFR1701.doc version 4.0 18.01.2012 vectron international resonator specification tfr17 01 4/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh & co. kg reserves the ri ght to make changes to the product(s) and/or inform ation contained herein without notice. no liability is assumed as a result of the ir use or application. no rights under any patent accompany the sale of any such product(s) or information. air reflow temperature conditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/ second > 100c between 300 and 600 seconds > 150c between 240 and 500 seconds > 217c between 30 and 150 seconds peak temperature max. 260c time within 5c of actual peak temperature between 10 and 30 seconds cool-down rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds temperature / c time / s max. 260c 217c 10 ... 30 s 30 ... 150 s max. 300 s chip-mount air reflow profile
filename: TFR1701.doc version 4.0 18.01.2012 vectron international resonator specification tfr17 01 5/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh & co. kg reserves the ri ght to make changes to the product(s) and/or inform ation contained herein without notice. no liability is assumed as a result of the ir use or application. no rights under any patent accompany the sale of any such product(s) or information. history version reason of changes name date 1.0 - generation of development specification raura 30.09.2010 2.0 - change of center frequency martens 03.12.2010 3.0 - generation of resonator specification martens 24.01.2011 4.0 - changed tape and reel alignment martens 18.01.2012 - updated typical value for turnover temperature
|
