cystech electronics corp. spec. no. : c393v8 issued date : 2013.06.13 revised date : 2013.06.24 page no. : 1/9 MTN2310V8 cystek product specification n-channel logic level enhancement mode power mosfet MTN2310V8 bv dss 60v i d 14a v gs =10v, i d =3a 31m r dson(typ) 35m v gs =4.5v, i d =2a description the MTN2310V8 is a n-channel enhancement-mode mosfet, providing the designer with the best combination of fast switching, ruggedized device de sign, low on-resistance and cost effectiveness. features ? single drive requirement ? low on-resistance ? fast switching characteristic ? dynamic dv/dt rating ? repetitive avalanche rated ? pb-free lead plating and halogen-free package equivalent circuit outline MTN2310V8 dfn3 3 pin 1 g gate d drain ssource ordering information device package shipping MTN2310V8-0-t1-g dfn3 3 (pb-free lead plating an d halogen-free package) 3000 pcs / tape & reel
cystech electronics corp. spec. no. : c393v8 issued date : 2013.06.13 revised date : 2013.06.24 page no. : 2/9 MTN2310V8 cystek product specification absolute maximum ratings (ta=25 c, unless otherwise specified) parameter symbol limits unit drain-source voltage v ds 60 gate-source voltage v gs 20 v continuous drain current @ v gs =10v, t c =25 c 14 continuous drain current @ v gs =10v, t c =100 c 9 continuous drain current @ v gs =10v, t a =25 c 6 continuous drain current @ v gs =10v, t a =70 c i d 4.8 pulsed drain current i dm 30 *1 a t c =25 14 total power dissipation t a =25 p d 2.3 *2 w operating junction and storage temp erature range tj, tstg -55~+150 c thermal data parameter symbol value unit thermal resistance, junction-to-case, max r th,j-c 9 c/w thermal resistance, junction-to-ambient, max r th,j-a 50 *2 c/w note : 1. pulse width limited by maximum junction temperature. 2. surface mounted on a 1 in2 pad of 2oz copper. in practice r th,j-a will be determined by customer?s pcb characteristics. 125 c/w when mounted on a minimum pad of 2 oz. copper. characteristics (t c =25 c, unless otherwise specified) symbol min. typ. max. unit test conditions static bv dss 60 - - v gs =0v, i d =250 a v gs(th) 1 1.4 2.5 v v ds = v gs , i d =250 a g fs *1 - 9.5 - s v ds =5v, i d =3a i gss - - 100 na v gs = 20v - - 1 v ds =48v, v gs =0 i dss - - 25 a v ds =48v, v gs =0, tj=125 c - 31 45 v gs =10v, i d =3a r ds(on) *1 - 35 50 m v gs =4.5v, i d =2a dynamic ciss - 1116 - coss - 43 - crss - 37 - pf v ds =30v, v gs =0v, f=1mhz qg *1, 2 - 15 - qgs *1, 2 - 3.7 - qgd *1, 2 - 3.3 - nc v ds =30v, v gs =10v, i d =6a
cystech electronics corp. spec. no. : c393v8 issued date : 2013.06.13 revised date : 2013.06.24 page no. : 3/9 MTN2310V8 cystek product specification characteristics (t c =25 c, unless otherwise specified) symbol min. typ. max. unit test conditions t d(on) *1, 2 - 12 - tr *1, 2 - 18 - t d(off) *1, 2 - 37 - t f *1, 2 - 10 - ns v ds =30v, i d =1a, v gs =10v, r gs =6 source-drain diode i s *1 - - 6 i sm *3 - - 30 a v sd *1 - 0.75 1.2 v i s =2a, v gs =0v trr - 16 - ns qrr - 9 - nc i f =6a, di f /dt=100a/ s note : *1.pulse test : pulse width 300 s, duty cycle 2% *2.independent of operating temperature *3.pulse width limited by maximum junction temperature. recommended soldering footprint unit : mm
cystech electronics corp. spec. no. : c393v8 issued date : 2013.06.13 revised date : 2013.06.24 page no. : 4/9 MTN2310V8 cystek product specification typical characteristics typical output characteristics 0 5 10 15 20 25 30 012345 v ds , drain-source voltage(v) i d , drain current (a) 10v , 9v , 8v , 7v , 6v , 5v , 4 v v gs =2v v gs =3v brekdown voltage vs ambient temperature 0.4 0.6 0.8 1 1.2 1.4 -75 -50 -25 0 25 50 75 100 125 150 175 tj, junction temperature(c) bv dss , normalized drain-source breakdown voltage i d =250 a, v gs =0v static drain-source on-state resistance vs drain current 10 100 1000 0.01 0.1 1 10 100 i d , drain current(a) r ds(on) , static drain-source on-state resistance(m) v gs =2.5v v gs =4.5v v gs =3v v gs =10v reverse drain current vs source-drain voltage 0.2 0.4 0.6 0.8 1 1.2 024681 i dr , reverse drain current(a) v sd , source-drain voltage(v) 0 tj=25c tj=150c v gs =0v static drain-source on-state resistance vs gate-source voltage 0 20 40 60 80 100 120 140 160 024681 0 drain-source on-state resistance vs junction tempearture 0.4 0.8 1.2 1.6 2 2.4 -75 -50 -25 0 25 50 75 100 125 150 175 tj, junction temperature(c) r ds(on) , normalized static drain- source on-state resistance v gs =10v, i d =3a r ds( on) @tj=25c : 31 m typ. i d =3a v gs , gate-source voltage(v) r ds(on) , static drain-source on- state resistance(m)
cystech electronics corp. spec. no. : c393v8 issued date : 2013.06.13 revised date : 2013.06.24 page no. : 5/9 MTN2310V8 cystek product specification typical characteristics(cont.) capacitance vs drain-to-source voltage 10 100 1000 10000 0.1 1 10 100 v ds , drain-source voltage(v) capacitance---(pf) c oss ciss crss threshold voltage vs junction tempearture 0.4 0.6 0.8 1 1.2 1.4 -75 -50 -25 0 25 50 75 100 125 150 175 tj, junction temperature(c) v gs(th) , normalized threshold voltage i d =250 a i d =1ma forward transfer admittance vs drain current 0.01 0.1 1 10 100 0.001 0.01 0.1 1 10 i d , drain current(a) g fs , forward transfer admittance(s) ta=25c pulsed v ds =5v gate charge characteristics 0 2 4 6 8 10 0 4 8 12 16 20 qg, total gate charge(nc) v gs , gate-source voltage(v) i d =6a v ds =48v v ds =30v v ds =12v maximum safe operating area 0.01 0.1 1 10 100 0.1 1 10 100 v ds , drain-source voltage(v) i d , drain current(a) t a =25c, tj=150c v gs =10v, ja =50c/w single pulse dc 10ms 100ms r dson limited 100 s 1ms 1s maximum drain current vs junction temperature 0 1 2 3 4 5 6 7 25 50 75 100 125 150 175 tj, junction temperature(c) i d , maximum drain current(a) t a =25c, v gs =10v, r ja =50c/w
cystech electronics corp. spec. no. : c393v8 issued date : 2013.06.13 revised date : 2013.06.24 page no. : 6/9 MTN2310V8 cystek product specification typical characteristics(cont.) typical transfer characteristics 0 5 10 15 20 25 30 012345 v gs , gate-source voltage(v) i d , drain current (a) v ds =10v single pulse power rating, junction to ambient (note on page 2) 0 50 100 150 200 250 300 0.0001 0.001 0.01 0.1 1 10 100 pulse width(s) power (w) t j(max) =150c t a =25c ja =50c/w transient thermal response curves 0.001 0.01 0.1 1 1.e-04 1.e-03 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 1.e+03 t 1 , square wave pulse duration(s) r(t), normalized effective transient thermal resistance single pulse 0.01 0.02 0.05 0.1 0.2 d=0.5 1.r ja (t)=r(t)*r ja 2.duty factor, d=t 1 /t 2 3.t jm -t a =p dm *r ja (t) 4.r ja =50c/w
cystech electronics corp. spec. no. : c393v8 issued date : 2013.06.13 revised date : 2013.06.24 page no. : 7/9 MTN2310V8 cystek product specification reel dimension carrier tape dimension
cystech electronics corp. spec. no. : c393v8 issued date : 2013.06.13 revised date : 2013.06.24 page no. : 8/9 MTN2310V8 cystek product specification recommended wave soldering condition product peak temperature soldering time pb-free devices 260 +0/-5 c 5 +1/-1 seconds recommended temperature profile for ir reflow profile feature sn-pb eutectic assembly pb-free assembly average ramp-up rate (tsmax to tp) 3 c/second max. 3 c/second max. preheat ? temperature min(t s min) ? temperature max(t s max) ? time(ts min to ts max ) 100 c 150 c 60-120 seconds 150 c 200 c 60-180 seconds time maintained above: ? temperature (t l ) ? time (t l ) 183 c 60-150 seconds 217 c 60-150 seconds peak temperature(t p ) 240 +0/-5 c 260 +0/-5 c time within 5 c of actual peak temperature(tp) 10-30 seconds 20-40 seconds ramp down rate 6 c/second max. 6 c/second max. time 25 c to peak temperature 6 minutes max. 8 minutes max. note : all temperatures refer to topside of t he package, measured on the package body surface.
spec. no. : c393v8 issued date : 2013.06.13 revised date : 2013.06.24 page no. : 9/9 cystech electronics corp. MTN2310V8 cystek product specification dfn3 3 dimension marking: date code s s s g d d d d 2310 8-lead dfn3 3 plastic package cystek package code: v8 *: typical inches millimeters inches millimeters dim min. max. min. max. dim min. max. min. max. a 0.0276 0.0354 0.70 0.90 e 0.1181 0.1260 3.00 3.20 a1 0.0000 0.0197 0.00 0.50 e1 0.0531 0.0610 1.35 1.55 b 0.0094 0.0138 0.24 0.35 e 0.0256 bsc 0.65 bsc c 0.0039 0.0079 0.10 0.20 h 0.1260 0.1339 3.20 3.40 d 0.1280 0.1339 3.25 3.40 l 0.0118 0.0197 0.30 0.50 d1 0.1201 0.1280 3.05 3.25 l1 0.0039 0.0079 0.10 0.20 d2 0.0945 0.1024 2.40 2.60 l2 0.0445 ref 1.13 ref notes: 1.controlling dimension: millimeters. 2.maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.if there is any question with packing specification or packing method, please c ontact your local cystek sales office. material: ? lead: pure tin plated. ? mold compound: epoxy resin family, flammability solid burning class: ul94v-0. important notice: ? all rights are reserved. reproduction in whole or in part is prohibited without the prior written approval of cystek. ? cystek reserves the right to make changes to its products without notice. ? cystek semiconductor products are not warranted to be suitable for use in life-support applications, or systems. ? cystek assumes no liability for any consequence of customer pr oduct design, infringement of pat ents, or application assistance .
|
