super fast recovery diode RF05VYM1SFH aec-q101 qualified ? series ? dimensions (unit : mm) ? land size figure (unit : mm) standard fast recovery ? application high frequency rectification ? features 1) small mold type (tumd2m) ? structure 2) high speed switching 3) low forward voltage ? taping dimensions (unit : mm) ? construction silicon epitaxial planar type ? absolute maximum ratings (t a = 25c) repetitive peak reverse voltage v rm v reverse voltage v r v i fsm a operating junction temperature t j c storage temperature t stg c ? electrical characteristics (t j = 25c) symbol min. typ. max. unit v f - 0.82 0.98 v reverse current i r -0.0110 ? a reverse recovery time trr - 12 25 ns thermal resistance r th(j-l) --30 c / w average current i o a i f =0.5a on glass epoxy substrate 60hz half sin wave , resistive load 0.5 100 6 150 ? 55 to ? 150 v r =100v direct voltage i f =0.5a, i r =1a, irr=0.25i r junction to lead non-repetitive forward surge current parameter forward voltage conditions 60hz half sin wave ,non-repetitive at t j =25c - - symbol limits unit 100 parameter conditions duty Q 0.5 1.30.05 0.80.05 2.50.2 1.90.1 0.60.2 0.1 0.170.1 0.05 1.4 0.1 2.0 0.1 rohm : tumd2m dot (y ear week factor y) + da y tumd2m cathode anode 1.1 2.0 0.8 0.5 1/4 2015.03 - rev.a datasheet www.rohm.com ? 2015 rohm co., ltd. all rights reserved.
RF05VYM1SFH ? electrical characteristic curves 0.1 1 10 100 1000 0 20406080100 t j = 25 c t j = 150 c t j = 75 c t j = 125 c 0.001 0.01 0.1 1 10 0 200 400 600 800 1000 1200 1400 t j = 75 c t j = 25 c t j = 125 c t j = 150 c 0.1 1 10 100 110100 t j = 25 c 1 10 100 0 5 10 15 20 25 30 f = 1mhz t a = 25 c peak surge forward current : i fsm (a) forward current : i f (a) forward voltage : v f (mv) v f -i f characteristics reverse current : i r (na) reverse voltage : v r (v) v r -i r characteristics capacitance between terminals : c t (pf) reverse voltage : v r (v) v r -c t characteristics number of cycles i fsm -cycle characteristics 1cyc. 8.3ms i fsm 8.3ms 2/4 2015.03 - rev.a www.rohm.com ? 2015 rohm co., ltd. all rights reserved. data sheet
RF05VYM1SFH ? electrical characteristic curves 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 306090120150 d = 0.1 d = 0.2 half sin wave d = 0.5 d.c. 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0306090120150 d.c. d = 0.1 d = 0.2 half sin wave d = 0.5 1 10 100 1000 0.001 0.01 0.1 1 10 100 1000 r th (j-a) r th (j-l) 0.1 1 10 100 110100 t j = 25 c i fsm time t t j =150 c d=t/t t v r io v r =v rmax 0a 0v t t j =150 c d=t/t t v r io v r =v rmax 0a 0v transient thermal impedance : r th ( c/w) peak surge forward current : i fsm (a) time : t(ms) i fsm -t characteristics time : t(s) r th -t characteristics average rectified forward current : i o (a) ambient temperature : t a ( c) derating curve (i o -t a ) average rectified forward current : i o (a) lead temperature : t l ( c) derating curve (i o -t l ) 3/4 2015.03 - rev.a www.rohm.com ? 2015 rohm co., ltd. all rights reserved. data sheet
RF05VYM1SFH ? electrical characteristic curves forward power dissipation : p f (w) average rectified forward current : i o (a) i o -p f characteristics 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 d = 0.1 d = 0.2 half sin wave d = 0.5 d.c. t j = 150 c 4/4 2015.03 - rev.a www.rohm.com ? 2015 rohm co., ltd. all rights reserved. data sheet
r1102 a www.rohm.com ? 201 5 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes the information contained herein is subject to change without notice. before you use our products, please contact our sales representative and verify the latest specifica- tions : although rohm is continuously working to improve product reliability and quality, semicon- ductors can break down and malfunction due to various factors. therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. rohm shall have no responsibility for any damages arising out of the use of our poducts beyond the rating specified by rohm. examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm or any other parties. rohm shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. the products are intended for use in general electronic equipment (i.e. av/oa devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. the products specified in this document are not designed to be radiation tolerant. for use of our products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a rohm representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. do not use our products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. rohm shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. rohm has used reasonable care to ensur the accuracy of the information contained in this document. however, rohm does not warrants that such information is error-free, and rohm shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. please use the products in accordance with any applicable environmental laws and regulations, such as the rohs directive. for more details, including rohs compatibility, please contact a rohm sales office. rohm shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. when providing our products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the us export administration regulations and the foreign exchange and foreign trade act. this document, in part or in whole, may not be reprinted or reproduced without prior consent of rohm. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14)
|
