![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
customer approval sheet customer approval sheet customer approval sheet customer approval sheet company name company name company name company name model model model model a070sn01 v0 customer customer customer customer approved approved approved approved approval for specifications only (spec. ver. approval for specifications only (spec. ver. approval for specifications only (spec. ver. approval for specifications only (spec. ver. 0. 0.0. 0.5 55 5 ) ) ) ) approval for specifications and es sample (spec. ve r. approval for specifications and es sample (spec. ve r. approval for specifications and es sample (spec. ve r. approval for specifications and es sample (spec. ve r. 0. 0.0. 0.5 55 5 ) ) ) ) approval for specifications and cs sample (spec. ve r. approval for specifications and cs sample (spec. ve r. approval for specifications and cs sample (spec. ve r. approval for specifications and cs sample (spec. ve r. 0. 0.0. 0.5 55 5) )) ) customer remark : customer remark : customer remark : customer remark : p/n : comment : www.datasheet.co.kr datasheet pdf - http://www..net/
all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. doc. version : 0.5 total pages : 28 date : 2009/02/12 product specification 7.0" color tft-lcd module model name a070sn01 v0 planned lifetime: from 2009/feb. to 2010/feb. phase-out control: from 2009/sep. to 2010/feb. eol schedule: 2010/feb. < >preliminary specification < >final specification note: the content of this specification is subject to change. ? 2008 au optronics all rights reserved, do not copy. www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 1/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. record of revision version revise date page content 0.0 2008/11/25 all first draft. 0.1 2008/12/26 4-5 modify front and rear drawing 0.2 2009/01/09 4-5 modify blu connector drawing 0.3 2009/01/15 3 color depth 6-7 update pin assignment pin 44, 30 and 31 9 update absolut power rating 11 led driving method 15 power on/off sequence 16 modify view angle 24 update gamma voltage 25 update vcom circuit 26 update application note j3 0.4 2009/02/06 3 modify weight data 16 update wx/wy chromaticity 0.5 2009/02/11 13 update input timing 10-11 update vcomdc update current and power consumption www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 2/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. contents a. general information................................ ................................................... ...........3 b. outline dimension .................................. ................................................... ...........4 1. tft-lcd module C front view........................................................................................................4 2. tft-lcd module C rear view .........................................................................................................5 c. electrical specifications .......................... ................................................... ...........6 1. tft lcd panel pin assignment ......................................................................................................6 2. absolute maximum ratings .............................................................................................................9 d. electrical dc characteristics...................... ................................................... .....10 1. current consumption (agnd=gnd=0v)...................................................................................11 2. backlight driving conditions .........................................................................................................11 e. electrical ac characteristics...................... ................................................... .....12 1. signal ac characteristics ................................................................................................................12 2. input timing setting.......................................................................................................................13 3. vertical timing:...................................................................................................................................13 f. power on/off characteristics....................... ................................................... ..14 recommended power on/off sequence...............................................................................................14 g. optical specification .............................. ................................................... ..........15 h. reliability test items............................. ................................................... ...........18 i. packing and marking ................................. ................................................... ......21 1. packing form .........................................................................................................................................21 2. module/panel label information ...................................................................................................22 3. carton label information.................................................................................................................22 j. application note ................................... ................................................... ............23 1. gamma voltage suggested circuit is as follows...............................................................................23 2. vcom buffer suggested circuit is as follows ....................................................................................24 3. application circuit ............................................................................................................................25 k. precautions........................................ ................................................... ..................27 www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 3/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. a. general information this product is for portable dvd and digital photo frame app lication. no. item unit specification remark 1 screen size inch 7.0 (diagonal) 2 display resolution dot 800(h)600 rgb(v) 3 overall dimension mm 154(h) 119.2(v) 5.1(t) note 1 4 active area mm 141.6(h)106.2(v) 5 pixel pitch mm 0.177(h)0.177(v) 6 color configuration -- r. g. b. stripe note 2 7 color depth -- 16m colors note 3 8 ntsc ratio % 50 9 display mode -- normally white 10 panel surface treatment -- anti-glare 11 weight g 123 12 backlight power consumption w 1.2 note 1: not include blacklight cable and fpc. refer n ext page to get further information. note 2: below figure shows dot stripe arrangement. note 3: the full color display depends on 24-bit data signal (pin 4~27). r g b r g b r g b r g b r g b . . ( 1 2 3. .. . 2398 2399 2400 ) ( 1 ... ..600 ) www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 4/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. b. outline dimension 1. tft-lcd module C front view www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 5/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. 2. tft-lcd module C rear view www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 6/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. c. electrical specifications 1. tft lcd panel pin assignment recommended connector : pin no. symbol i/o description remark 1 agnd p analog ground 2 avdd p analog power 3 vdd p digital power 4 r0 i data input (lsb) 5 r1 i data input 6 r2 i data input 7 r3 i data input 8 r4 i data input 9 r5 i data input 10 r6 i data input 11 r7 i data input (msb) 12 g0 i data input (lsb) 13 g1 i data input 14 g2 i data input 15 g3 i data input 16 g4 i data input 17 g5 i data input 18 g6 i data input 19 g7 i data input (msb) 20 b0 i data input (lsb) 21 b1 i data input 22 b2 i data input 23 b3 i data input 24 b4 i data input 25 b5 i data input 26 b6 i data input 27 b7 i data input (msb) 28 dclk i clock input 29 de i data enable signal 30 nc - no connect 31 nc - no connect www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 7/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 32 left./right (optional) i left./right note 1 33 up/down (optional) i up/down note 1 34 display h/l h = display on, l = diplay off 35 nc - no connect 36 vdd p digital power 37 nc - no connect 38 gnd p digital ground 39 agnd p analog ground 40 avdd p analog power 41 vcom i for external vcom dc input 42 dith i/o dithering setting dith = "l" 6bit resolution(lsb last 2 bits of input data turncated) dith = "h" 8bit resolution(default setting) 43 nc i/o no connect 44 vcom i for external vcom dc input 45 v10 p gamma correction voltage reference 46 v9 p gamma correction voltage reference 47 v8 p gamma correction voltage reference 48 v7 p gamma correction voltage reference 49 v6 p gamma correction voltage reference 50 v5 p gamma correction voltage reference 51 v4 p gamma correction voltage reference 52 v3 p gamma correction voltage reference 53 v2 p gamma correction voltage reference 54 v1 p gamma correction voltage reference 55 nc - no connect 56 vgh p positive power for tft 57 vdd p digital power 58 vgl p negative power for tft 59 gnd p digital ground 60 nc - no connect i: input pin; p: power pin; g: ground pin; c: capacitor p in www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 8/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. note 1: option a: up to down (updn = h), left to right (sh lr = h). option b: down to up (updn = l), right to left (shlr = l). www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 9/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 2. absolute maximum ratings item symbol condition min. max. unit remark vdd gnd=0 -0.3 +5.0 v avdd gnd=0 -0.3 +14.0 v vgh -0.3 42 v power voltage vgl gnd=0 -20 0.3 v storage temperature tstg - -20 70 ambient temperature operating topa - -10 60 ambient temperature note 1: functional operation should be restricted un der ambient temperature (25 ). note2: maximum ratings are those values beyond whic h damages to the device may occur. functional operation should be restricted to the limits in the el ectrical characteristics chapter. www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 10/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. d. electrical dc characteristics note 1 : agnd version: 0.5 page: 12/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. e. electrical ac characteristics 1. signal ac characteristics parameter symbol min. typ. max. unit remark dclk duty cycle -- 40 50 60 % t cw / t dclk x100% de setup time t est 8 -- -- ns data setup time t dst 8 -- -- ns data hold time t dhd 8 -- -- ns vsd setup time t vst 8 -- -- ns vsd hold time t vhd 8 -- -- ns hsd setup time t hst 8 -- -- ns hsd hold time t hhd 8 -- -- ns // 70% t cw t dclk 1st 2nd last // // t dhd t dst 70% 70% 30% 30% 70% 30% t est // 70% www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 13/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 2. input timing setting horizontal timing : parameter symbol min. typ. max. unit. remark dclk frequency f dclk 35 40 45 mhz dclk period t dclk 22 25 28 ns hsync period (= t hd + t hbl ) t h - 1000 - dclk active area t hd - 800 - dclk horizontal blanking (= t hf + t he ) t hbl 200 dclk horizontal input timing (de mode) 3. vertical timing: parameter symbol min. typ. max. unit. remark vsync period (= t vd + t vbl ) t v - 660 - th active lines t vd - 600 - vertical blanking (= t vf + t ve ) t vbl - 60 - th vertical timing (de mode) www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 14/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. f. power on/off characteristics recommended power on/off sequence the suggested lcd power on/off sequence is below: www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 15/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. g. optical specification all optical specification is measured under typical condition (note 1, 2) item symbol condition min. typ. max. unit remark response time rise fall tr tf =0 -- -- 3 13 6 26 ms ms note 3 contrast ratio cr at optimized viewing angle 400 500 -- note 4 top bottom left viewing angle right cr R 10 60 60 70 70 deg. note 5 brightness y l =0 220 250 -- cd/m 2 note 6 x =0 0.25 0.30 0.35 white y =0 0.27 0.32 0.37 x =0 0.53 0.58 0.63 red y =0 0.28 0.33 0.38 x =0 0.28 0.33 0.38 green y =0 0.51 0.56 0.61 x =0 0.10 0.15 0.20 chromaticity blue y =0 0.06 0.11 0.16 uniformity y l % 70 75 -- % note 7 note 1. ambient temperature =25 , and led lightbar current i l = 120 ma. to be measured in the dark room. www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 16/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% note 2. to be measured on the center area of panel with a viewing cone of 1 by topcon luminance meter bm-5a, after 15 minutes operation. center of the screen field=1 note 3. definition of response time: the output signals of photo detector are measured when the in put signals are changed from black to white(falling time) and from white to black(ri sing time), respectively. the response time is defined as the time interval between the 10 % and 90% of amplitudes. refer to figure as below. note 4. definition of contrast ratio: contrast ratio is calculated with the following formula. status black" " at is lcd n output whe detector photo status white" " at is lcd n output whe detector photo (cr) ratio contrast = bm-5a www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 17/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. note 5. definition of viewing angle, , refer to figure as below. note 6. measured at the center area of the panel when all the input t erminals of lcd panel are electrically opened. note 7: luminance uniformity of these 9 points is defined as below: 9) - (1 points 9 in luminance maximum 9) - (1 points 9 in luminance minimum uniformity = www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 18/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. h. reliability test items no. test items conditions remark 1 high temperature storage ta= 70 240hrs 2 low temperature storage ta= -20 240hrs 3 high ttemperature operation tp= 60 240hrs 4 low temperature operation ta= -10 240hrs 5 high temperature & high humidity tp= 50 . 80% rh 240hrs operation 6 heat shock -30 ~70 , 50 cycle, 1hrs/cycle non-operation 7 electrostatic discharge contact = 4 kv, class b air = 8 kv, class b note 4 8 image sticking 25 , 4hrs note 5 frequency range : 10~55hz stoke : 1.5mm sweep : 10 ~ 55 ~ 10hz 2 hours for each direction of x,y,z 9 vibration (6 hours for total) jis c7021, a-10 condition a 10 mechanical shock 100g . 6ms, x,y,z 3 times for each direction non-operation jis c7021, a-7 condition c 11 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz C6db/octave from 200~500hz iec 68-34 12 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces 13 pressure 5kg, 5sec note 6 note 1. ta: ambient temperature. tp: panel surface temperatu re note 2. in the standard conditions, there is not display func tion ng issue occurred. all the cosmetic specification is judged before the reliability stress. note 3. all the cosmetic specification is judged before the reliab ility stress. www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 19/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. note4. all test techniques follow iec6100-4-2 standard. pls be noticed that product needs grounding design on customer system side. test condition note pattern procedure and set-up contact discharge 330?, 150pf, 1sec, 8 point, 25times/point air discharge 330?, 150pf, 1sec, 8 point, 25times/point criteria b C some performance degradation allowed. no data lost. self-recoverable hardware failure. others 1. gun to panel distance 2. no spi command, keep default register settings. note 5. operate with chess board pattern as figure and lasting time and temperature as the conditions. then judge with 50% gray level, the mura is less than jnd 2.5 www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 20/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. note 6. the panel is tested as figure. the jig is10 m m made by cu with rubber and the loading speed is 3mm/min on position a~e. after the conditi on, no glass crack will be found and panel function check is ok.( no guarantee lc mura lc bubble) loading lcm www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 21/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. i. packing and marking 1. packing form www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 22/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 2. module/panel label information the module/panel (collectively called as the product) will be at tached with a label of shipping number which represents the identification of the product at a specific location. refer to the product outline drawing for detailed location and size of the label. the label is composed of a 22-digit serial number and printed with code 39/128 with th e following definition: 3. carton label information the packing carton will be attached with a carton label where packing q ty, auo model name, auo part number, customer part number (optional) and a ser ies of carton number in 13 or 14 digits are printed. the carton number is appari ng in the following format: refer to the drawing of packing format for the location and size of the carton label. www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 23/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. j. application note 1. gamma voltage suggested circuit is as follows avdd c312 1uf/16v/x5r/0603 c313 1uf/16v/x5r/0603 c314 1uf/16v/x5r/0603 c316 1uf/16v/x5r/0603 c315 1uf/16v/x5r/0603 c317 1uf/16v/x5r/0603 c318 1uf/16v/x5r/0603 c319 1uf/16v/x5r/0603 c325 1uf/16v/x5r/0603 c320 0.1uf/16v/x5r/0402 c321 10uf/16v/x5r/1206 r2 r1 r3 r5 r4 r6 r10 r11 r9 r7 r8 v4 v3 v2 v1 v8 v7 v6 v5 v10 v9 c326 1uf/16v/x5r/0603 2 nd preliminary 2.20k r1 4.99k r2 2.20k r3 1.40k r4 3.00k r5 6.49k r6 3.00k r7 1.40 k r8 2.32k r9 4.99k r10 4.02k r11 www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 24/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 2. vcom buffer suggested circuit is as follows avdd avdd r325 0/5%/0603 3 4 2 5 1 + - u301a no(ad8565) c324 10uf/10v/x5r/k/0805 r323 40k/5%/0603 r324 30k/5%/0603 c323 0.1uf/16v/x5r/k/0402 vr301 30kvr vcom1 www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 25/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 3. application circuit agnd 1 avdd 2 vdd 3 r0 4 r1 5 r2 6 r3 7 r4 8 r5 9 r6 10 r7 11 g0 12 g1 13 g2 14 g3 15 g4 16 g5 17 g6 18 g7 19 b0 20 b1 21 b2 22 b3 23 b4 24 b5 25 b6 26 b7 27 dclk 28 de 29 nc 30 nc 31 shlr 32 updn 33 disp 34 nc 35 vdd 36 nc 37 gnd 38 agnd 39 avdd 40 vcom 41 dith 42 nc 43 vcom 44 v10 45 v9 46 v8 47 v7 48 v6 49 v5 50 v4 51 v3 52 v2 53 v1 54 nc 55 vgh 56 vdd 57 vgl 58 gnd 59 nc 60 j1 con60 shlr updn dclk de vdd v10 dith r0 r1 r2 v6 r3 v5 r4 v4 r5 v3 r6 v2 r7 v1 g0 g1 g2 vgl g3 vdd g4 g5 g6 g7 b0 b1 b2 b3 b4 b7 b5 b6 avdd vcom vgh vcom v9 v8 v7 avdd vdd disp www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 26/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. avdd = 11.68v +11.68v r426 = 10k ohm +15v -7v c414 1uf/35v/x5r/0603 vgh = 15v r427 = 110k ohm r418 = 10k ohm r420= 56k ohm c413 0.1uf/25v/x5r/0603 vgl = -7v r417 = 10k ohm r419= 0 ohm r428 = 0 ohm r424 = 82.5k ohm k 2 a 1 c 3 dm408 dan217u r425 = 910 ohm 3.3v r412 0/5%/0603 r433 261/5%/0603 k 2 a 1 c 3 dm405 dan217u r432 0/5%/0603 r416 0/5%/0603 5v r413 100k/5%/0603 r414 6.8k/5%/0603 r417 10k/1%/0603 r422 0/5%/0603 r421 10/1%/0603 r419 0/5%/0603 r420 56k/1%/0603 l402 cxlp100-100(10uh) cxlp100 r424 82.5k/1%/0603 r430 0/5%/0603 r428 0/5%/0603 r429 10/1%/0603 r427 110k/1%/0603 r431 5.1k/5%/0603 r426 10k/1%/0603 fb_2 en fb_1 5v r411 nc(0/5%/0603) r415 no(0/5%/0603) fb_3 3.3v c420 22nf/50v/x5r/0603 c418 10uf/10v/x5r/0805 c426 1uf/35v/x5r/0603 c421 0.1uf/25v/x5r/0603 1 3 2 d404 sb07-03c c427 2.2uf/35v/x5r/0805 c424 0.1uf/25v/x5r/0603 c429 2.2uf/25v/x5r/0805 c416 2.2uf/35v/x5r/0805 1 2 d405 no(rb551v-30) c425 0.1uf/25v/x5r/0603 k 2 a 1 c 3 dm406 dan217u c428 27pf/50v/x5r/0603 c423 27pf/50v/x5r/0402 c430 22uf/16v/x5r/1206 k 2 a 1 c 3 dm407 dan217u c417 0.1uf/10v/x5r/0402 c415 0.1uf/25v/x5r/0603 r423 5.1k/1%/0603 r425 910/1%/0603 r418 10k/1%/0603 c419 10nf/50v/x5r/0603 /rdy 1 fb1 2 comp 3 in 4 gnd 5 ref 6 fb2 7 fb3 8 ct 16 sw 15 pgnd 14 i n3 13 gh 12 i n2 11 gl 10 en 9 u401 mp1530 c422 2.2uf/35v/x5r/0805 vgl2 vgh2 avdd2 www.datasheet.co.kr datasheet pdf - http://www..net/ version: 0.5 page: 27/28 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. k. precautions 1. do not twist or bend the module and prevent the unsuitable extern al force for display module during assembly. 2. adopt measures for good heat radiation. be sure to use the module with in the specified temperature. 3. avoid dust or oil mist during assembly. 4. follow the correct power sequence while operating. do not apply the invalid signal, otherwise, it will cause improper shut down and damage the module. 5. less emi: it will be more safety and less noise. 6. please operate module in suitable temperature. the response t ime & brightness will drift by different temperature. 7. avoid to display the fixed pattern (exclude the white pattern) in a long period, otherwise, it will cause image sticking. 8. be sure to turn off the power when connecting or disconnecting the cir cuit. 9. polarizer scratches easily, please handle it carefully. 10. display surface never likes dirt or stains. 11. a dewdrop may lead to destruction. please wipe off any moisture before using mod ule. 12. sudden temperature changes cause condensation, and it will cause polarizer dam aged. 13. high temperature and humidity may degrade performance. please do not expose the module to the direct sunlight and so on. 14. acetic acid or chlorine compounds are not friends with tft display module. 15. static electricity will damage the module, please do not touch t he module without any grounded device. 16. do not disassemble and reassemble the module by self. 17. be careful do not touch the rear side directly. 18. no strong vibration or shock. it will cause module broken. 19. storage the modules in suitable environment with regular packing. 20. be careful of injury from a broken display module. 21. please avoid the pressure adding to the surface (front or rear s ide) of modules, because it will cause the display non-uniformity or other function issue. www.datasheet.co.kr datasheet pdf - http://www..net/ |
Price & Availability of A070SN01V0
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |