tq q7303 1747.5 mhz lte band 3 uplink b aw f ilter applications ? ? base station ? general p urpose w ireless 6 pin 3 ? ? functional block diagram 1 2 3 4 5 6 top view product features ? ? ? high a ttenuation ? low loss ? single - ended o peration ? small size: 3 ? x ? 3 ? x ? 1.02 mm ? surface mount device ? rohs compliant, pb - f ree general descr iption the tq q7303 is a n exceptionally high performance u plink baw filter for lte band 3. this filter is housed in a compact 3 ? x ? 3 x 1.02 mm packag e for base station applications. low insertion loss, coupled with high attenuation makes this filter an i deal choice for u plink rf filtering needs. the tq q7303 is part of triquint?s extensive portfolio o f rf baw and saw filters. ordering information part no. description TQQ7303 1747.5 mhz baw filter TQQ7303 - evb e valuation board standard t/r size = 25 00 pieces on a 7" reel pin configuration pin no. label 2 input 5 output 1, 3,4, 6 case ground ground input ground ground output ground advanced datasheet: rev c 0 7 - 16- 1 4 - 1 of 8 - discla imer: subject to change without notice ? 201 4 triquint www.triquint.com
tq q7303 1747.5 mhz lte band 3 uplink b aw f ilter absolute maximum ratings parameter rating storage temperature ?40 ? ? recommended operating conditions parameter min typ max units t case ? electrical specifications ? (1,2 ,3 ) test conditions unless otherwise specified: temp. +25?c, z parameter conditions min typ max units pass band frequency 1710 1785 cent er frequency - 1747.5 - mhz 3.0 db bandwidth - 81 - mhz insertion loss 1710? ? ?1785 ? mhz +25 ? ?40 ? ? 1710? ? ?1785 ? mhz +25 ? db p?p ?40 ? ? ? ? ? 1785 ? mhz +25 ? ? ? ? ? ? ? 1825 mhz (?40 to ?10 ? c ) 1825 ? 1880 mhz 1880 ? 1920 mhz 1920 ? 2110 mhz 2110 ? 2170 mhz 2170 ? 2660 mhz 2660 ? 2690 mhz 2690 ? 3800 mhz 3800 ? 5000 mhz 30 28 10 38 44 30 40 40 24 22 10 5 32 32 20 46 52 44 42 44 28 26 17 11 - - - - - - - - - - - - db source/load impedance ( 7 ) single ended - 50 - ohms notes: 1. all specifications are based on the triquint schemati c for the main reference design. 2. production test is performed at ro om temp. to a guard - ban ded specification to ensure electrical compliance over temperature . 3. electrical margin has been built into the design to account for variation due to temperature drift and manufacturing tolerances . 4. typical values are based on average measure ments at room te mperature of 25 c . 5. this is defined as the difference between the maximum and minimum insertion loss within the specified band . 6. this is defined as the worst difference between a peak and adjacent valley within defined frequency points . 7. this is the optimum i mpedance in order to achieve the performance shown . advanced datasheet: rev c 0 7 - 16- 1 4 - 2 of 8 - discla imer: subject to change without notice ? 201 4 triquint www.triquint.com
tq q7303 1747.5 mhz lte band 3 uplink b aw f ilter tqq 7303 - pcb evaluation board 1,3,4,6 2 5 50 50 ? ? u1 n/a 1742.5 mhz baw filter triquint tq q7303 n/a n/a printed circuit board triquint 960 700 n/a n/a sma edge connector radiall 9602 - 1111 - 018 evaluation board pcb information top, middle & bottom layers: 1 oz copper substrates: fr4 dielectric, .031? thick finish plating: nickel: 3 - 8m thick, gold: .03 - .2m thick h ole plating: copper min .0008m thick single - ended input single - ended output advanced datasheet: rev c 0 7 - 16- 1 4 - 3 of 8 - discla imer: subject to change without notice ? 201 4 triquint www.triquint.com
tq q7303 1747.5 mhz lte band 3 uplink b aw f ilter performance plots test conditions unless otherwise noted: temp . = ? +25 ? c advanced datasheet: rev c 0 7 - 16- 1 4 - 4 of 8 - discla imer: subject to change without notice ? 201 4 triquint www.triquint.com
tq q7303 1747.5 mhz lte band 3 uplink b aw f ilter package marking and dimensions top view bottom view pin #1 identifier 3.000.10 3.000.10 (5x) 0.650x x 0.600y 0.10 c a b (1x) 1.400x x 0.600y 0.10 c a b pin 1 3.000.10 3.000.10 0.1000.100 0.1000.100 1.100 1.100 1.071 0.700 1.075 2x 0.10 c 2x 0.10 c b a side view 0.10 c c 3.000.10 1.020.07 notes: 1. all d i mensions are in millimeters 2. all tolerances are 0.15 ? mm except overall length and width 0.10 ? mm 3. contact plating : enig (electroless nickel immersion gold) 4. terminations: 0.5 ? ? ? au plating , over a 2 ? ? ? ni plating pcb mounting pattern notes: 1. all dimensions are in millimeters. angles are in degrees. 2. use 1 oz. copper minimum for top and bottom layer metal. q7303 yyww axxxx package marking product identifier: q7303 date code: yyww assembly code: a axxxx advanced datasheet: rev c 0 7 - 16- 1 4 - 5 of 8 - discla imer: subject to change without notice ? 201 4 triquint www.triquint.com
tq q7303 1747.5 mhz lte band 3 uplink b aw f ilter tape and reel information ? carrier and cover tape dimen sions tape and reel specifications for this part are also available on the triquint website . standard t/r size = 2500 pieces on a 7? reel feature measure symbol size (in) size (mm) cavity length a0 0.13 2 3.35 width b0 0.1 32 3.35 depth k0 0.055 1.40 pitch p1 0.157 4.00 centerline distance cavity to perforation - length direction p2 0.079 2.00 cavity to perforation - width direction f 0.138 3.50 cover tape width c 0.213 5.40 carrier tape width w 0.315 8.00 advanced datasheet: rev c 0 7 - 16- 1 4 - 6 of 8 - discla imer: subject to change without notice ? 201 4 triquint www.triquint.com
tq q7303 1747.5 mhz lte band 3 uplink b aw f ilter tape and reel information ? reel dimensions tape and reel specifications for this part are also available on the triquint website . standard t/r size = 2,500 pieces on a 7 ? reel. feature measure symbol size (in) size (mm) flange diameter a 6.969 177.0 thickness w2 0.559 14 .2 space between flange w1 0.346 8.8 hub outer diameter n 2.283 58.0 arbor hole diameter c 0.512 13.0 key slit width b 0.079 2.0 key slit diameter d 0.787 20.0 advanced datasheet: rev c 0 7 - 16- 1 4 - 7 of 8 - discla imer: subject to change without notice ? 201 4 triquint www.triquint.com
tq q7303 1747.5 mhz lte band 3 uplink b aw f ilter product compliance information esd sensitivity ratings cau tion! esd - sensitive device esd rating: class 0 b value: ?125?v to < ?25 0 ?v test: human body model (hbm) standard: esda?/? jedec standard js - 001- 2012 esd rating: class b value: > ? 2 0 0 ?v to < ?4 00 ?v test: machine model (mm) standard: jedec standard jes d22 - a115 f solderability compatible with both lead - free (260c maximum reflow temperature) and tin/lead (245c maximum reflow temperature) soldering processes. contact plating: enig (electroless nickel immersion gold) rohs compliance this part is comp liant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazardous substances in electrical and electronic equipment). this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp - a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free msl rating msl rating: level 3 test: 260? c convection reflow standard: jedec standard ipc/jedec j - std - 020 contact information for the latest specifications, additional product information, worldwide sales and distribution locations, and information about triquint: web: www.triquint.com tel: +1. 407.886.8860 email: info - sales@t riquint .com fax: +1. 407.886.7061 for technic al questions and application information: email: sjcapplications.engineering@triquint.com important notice the information contained herein is believed to be reliable. triquint ma kes no warranties regarding the information contained herein. triquint assumes no responsibility or liability whatsoever for any of the information contained herein. triquint assumes no responsibility or liability whatsoever for the use of the informatio n contained herein. the information contained herein is provided "as is, where is" and with all faults, and the entire risk associated with such information is entirely with the user. all information contained herein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for triquint products. the information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, lice nses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. triquint products are not warranted or authorized for use as critical components in medical, life - saving, or life - s ustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. advanced datasheet: rev c 0 7 - 16- 1 4 - 8 of 8 - discla imer: subject to change without notice ? 201 4 triquint www.triquint.com
|
