npn rf transistor 1 2 3 4 product name package pin configuration marking BFP450 sot343 1 = b 2 = e 3 = c 4 = e ans high linearity low noise BFP450 1 features ? highly linear low noise driver amplifier for all rf frontends up to 2.5 ghz ? output compression point op 1db = 18.5 dbm at 90 ma, 3 v, 1.9 ghz, 50 ? system ? output 3rd order intermodulation point oip 3 = 31 dbm at 90 ma, 3 v, 1.9 ghz, 50 ? system ? maximum available gain g ma = 15.5 db at 50 ma, 3 v, 1.9 ghz ? minimum noise figure nf min = 1.7 db at 50 ma, 3 v, 1.9 ghz ? based on infineons reliable, high volume 25 ghz sieget? line ? easy to use pb-free (rohs compliant) standard package with visible leads ? qualified according aec q101 application examples driver amplifier ? ism bands 434 and 868 mhz ? 1.9 ghz cordless phones ? catv lna transmitter driver amplifier ? 2.4 ghz wlan and bluetooth output stage lna fo r active antennas ? tv, gps, sdars, 2.4 ghz wlan, etc suitable for 3 - 5.5 ghz oscillators attention: esd (electrostatic discharge) sensitive device, observe handling precautions product specification 1 of 2 4008-318-123 sales@twtysemi.com http://www.twtysemi.com ty
attention: stresses above the max. values listed here may cause permanent damage to the device. exposure to absolute maximum rating conditions for extended periods may affect device reliability. maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit. table 1 maximum ratings parameter symbol values unit note / test condition min. max. collector emitter voltage v ceo open base ?4.5v t a = 25 c ?4.1v t a = -55 c collector emitter voltage v ces ? 15 v emitter / base shortened collector base voltage v cbo ? 15 v open emitter emitter base voltage v ebo ? 1.5 v open collector collector current i c ?170ma? base current i b ?10ma? total power dissipation 1) 1) t s is the soldering point temperature. t s measured on the emitter lead at the soldering point of the pcb. p tot ?500mw t s 90 c junction temperature t j ?150c? storage temperature t stg -65 150 c ? BFP450 product specification 2 of 2 4008-318-123 sales@twtysemi.com http://www.twtysemi.com
|
