data sheet part number 856069 140 mhz saw filter subject to change or obsolescence without notice rev b 05/08 ? triquint semiconductor page 1 of 5 features for broadband applications typical 3 db bandwidth of 10 mhz high attenuation no impedance matching required for operation at 50 w single-ended operation ceramic surface mount package (smp) replaces sawtek p/n 851921 (bw 3db=10 mhz) hermetic rohs compliant (2002/95/ec), pb-free package pin configuration surface mount 13.3 x 6.50 x 1.50 mm bottom view smp-53c 6 7 8 9 10 5 4 3 2 1 single-ended configuration pin no. description 10 rf input 5 rf output 1,6 ground 2,3,4 case ground 7,8,9 case ground 1.80 6.50 1.02 1.91 13.3 2.31 r0.51 1.50 nom. 1.65 max. 0.64 dimensions shown are nominal in millimeters all tolerances are 0.15mm except overall length and width 0.10mm body: al 2 o 3 ceramic lid: kovar , ni plated terminations: au plating 0.5 - 1.0 m m, over a 2 - 6 m m ni plating pb
data sheet part number 856069 140 mhz saw filter subject to change or obsolescence without notice rev b 05/08 ? triquint semiconductor page 2 of 5 electrical specifications (1) operating temperature range: (2) -30 to +85 o c parameter (3) minimum typical (4) maximum unit center frequency - 140 - mhz minimum insertion loss - 20.87 21.7 db lower 1 db bandedge (5) upper 1 db bandedge - 144.508 135.38 144.79 135.524 - mhz mhz lower 3 db bandedge (5) upper 3 db bandedge - 145 135.00 145.24 135 - mhz mhz lower 40 db bandedge (5) upper 40 db bandedge 133.379 - 133.85 146.72 - 146.551 mhz mhz amplitude variation 135.524 - 144.508 mhz - 0.7 0.94 db phase linearity 135.524 - 144.508 mhz - 5 6.31 deg group delay variation 135.524 - 144.508 mhz - 45 57.3 nsec absolute delay - 1.52 - m sec relative attenuation (5) 15 - 130 mhz 130 - 133 mhz 147 - 150 mhz 150 - 350 mhz 47.8 52 50.6 51.3 50 57 53 53 - - - - db db db db source impedance (6) - 50 - w load impedance (6) - 50 - w substrate material - linbo 3 - - temperature coefficient of frequency - -94 - ppm/ o c notes : 1. all specifications are based on the triquint tes t circuit shown below 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. typical values are based on average measurements at room temperature 5. all attenuation measurements are measured relati ve to minimum insertion loss 6. this is the optimum impedance in order to achiev e the performance shown test circuit: 50 w single-ended 1,2,3,4 6,7,8,9 10 5 50 50 w ww w w ww w 15nh 68nh 50 w single-ended
data sheet part number 856069 140 mhz saw filter subject to change or obsolescence without notice rev b 05/08 ? triquint semiconductor page 3 of 5 typical performance (at room temperature)
data sheet part number 856069 140 mhz saw filter subject to change or obsolescence without notice rev b 05/08 ? triquint semiconductor page 4 of 5 matching schematics 50 w single-ended 1,2,3,4 6,7,8,9 10 5 50 50 w ww w w ww w 15nh 68nh 50 w single-ended marking pcb footprint xxxxxx 856069 sawtek 2.51 6.70 8.86 .69 1.22 2.00 the date code consists of: jjj = julian day, y = last digit of year, m = manufacturing site code this footprint represents a recommendation only dimensions shown are nominal in millimeters tape and reel a a 24 1.75 11.5 ?1.5 2.3 13.9 4.0 ?1.5 2.0 0.3 12.0 7.1 section a-a direction of travel ?330 24.8 2.7 ?102 ?13.0 ?20.2 2.0 id dot dimensions shown are nominal in millimeters packaging quantity:2000 units/reel
data sheet part number 856069 140 mhz saw filter subject to change or obsolescence without notice rev b 05/08 ? triquint semiconductor page 5 of 5 maximum ratings parameter symbol minimum maximum unit operating temperature range t -30 +85 o c storage temperature range t stg -40 +85 o c important notes warnings electrostatic sensitive device (esd) avoid ultrasonic exposure rohs compliance this product complies with eu directive 2002/95/ec (rohs) solderability compatible with jesd22-b102, pb-free process, 260c peak reflow temperature ( see soldering profile ) links to additional technical information pcb layout tips qualification flowchart soldering profile s-parameters rohs information other technical information triquints liability is limited only to the surface acoustic wave (saw) component(s) described in this data sheet. triquint does not accept any liabilit y for applications, processes, circuits or assemblies , which are implemented using any triquint componen t described in this data sheet. contact information po box 609501 orlando, fl 32860-9501 usa phone: +1 (407) 886-8860 fax: +1 (407) 886-7061 email: info-product@tqs.com web: www.triquint.com or contact one of our worldwide network of sales offices , representatives or distributors pb
|
