Part Number Hot Search : 
2N6045 16KD2 2SB1315 4MTCX M62241FP 233SF 1SMA160 1S74460B
Product Description
Full Text Search
 

To Download TQP369180-15 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  t qp369180 dc- 6 ghz gain block applications ? ? catv / satv / moca ? point to point ? defense & aerospace ? test & measurement equipment ? general purpose wireless sot - 89 package product featur es ? ? flat, broadband frequency response ? 15 db gain at 1.9 ghz ? 3.6 db noise figure at 1.9 ghz ? +29.5 dbm output ip3 at 1.9 ghz ? +14.4 dbm p1db at 1.9 ghz ? 50 ohm cascadable gain block ? single supply, 45 ma current ? sot - 89 package functional block diagram rf in gnd rf out gnd 1 2 3 4 pin configuration pin no. label 1 rf in 3 rf out 2, 4 gnd backside paddle gnd general description the tqp369180 is a general - purpose buffer amplifier that offers high dynamic range in a low - cost surface - mount package. at 1.9 ghz , the amplifier typically provides 15.0 db gain, +29.5 dbm oip3, and 3.6 db noise figure while drawing 45 ma current. the device combines dependable performance with consistent quality to maintain mttf values exceeding 100 years at mounting temperatures of +85c. the device is housed in a lead - free/green/rohs - compliant industry - standard sot - 89 package. the tqp369180 consists of a darlington - pair amplifier using the high reliability ingap/gaas hbt process technology. only dc - blocking capacitors, a bias re sistor, and an inductive rf choke are required for operation. this broadband mmic amplifier can be directly applied to various current and next generation wireless technologies such as cdma, w - cdma, and lte. in addition, the tqp369180 will work for oth er applications within the dc to 6 ghz frequency range. ordering information part no. description tqp369180 ingap/gaas hbt gain block tqp369180 - pcb 0.5 - 4 ghz evaluation board standard t/r size = 2500 pieces on a 13? reel datasheet: rev g 0 8 / 15 /14 - 1 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp369180 dc- 6 ghz gain block recommended operating co nditions parameter min typ max units t case ? absolute ma ximum ratings parameter rating storage temperature ? rf input power, cw, 50, t=25 electrical specificat ions test conditions unless otherwise noted: i cc = 45 ma , t case = +25c, 50 system parameter conditions min typ max units operational frequency range dc 6 000 mhz test frequency 1900 mhz gain 13.5 15.0 16.5 db input return loss 20.1 db out put return loss 17.8 db output p1db +14.4 dbm output ip3 pout=0 dbm/tone, f= 1 mhz - 2 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp369180 dc- 6 ghz gain block s - parameters test conditions: v c c =+3.9 v (typ.), i cc =45 ma (typ.), t case =+25 c, 50 system, calibrated to device leads fr eq ( m hz) s11 (db) s11 (ang) s21 (db) s21 (ang) s12 (db) s12 (ang) s22 (db) s22 (ang) 10 - 28.1 - 178.4 16.1 179.8 - 19.0 0.5 - 38.9 46.0 20 - 27.6 - 176.2 16.1 179.4 - 19.0 - 0.2 - 40.4 34.7 50 - 27.4 - 178.9 16.1 178.9 - 18.9 - 0.7 - 40.9 0.7 100 - 27.1 176.6 16.1 1 76.5 - 18.9 - 1.6 - 44.0 4.6 200 - 27.5 175.7 16.1 172.9 - 18.9 - 3.3 - 40.9 13.8 500 - 28.4 151.7 16.1 162.9 - 19.0 - 8.4 - 45.8 - 66.1 900 - 26.4 148.6 15.9 149.1 - 19.0 - 15.6 - 42.0 - 131.5 1000 - 25.9 139.6 15.9 145.6 - 19.0 - 17.2 - 36.4 - 158.2 1500 - 24.2 135.2 15.8 128.4 - 19.1 - 25.8 - 28.6 176.7 1900 - 22.8 116.2 15.7 114.9 - 19.1 - 32.9 - 24.4 164.8 2000 - 21.5 109.8 15.7 111.7 - 19.2 - 34.9 - 23.9 168.4 2500 - 19.3 104.3 15.6 94.6 - 19.3 - 42.8 - 20.6 139.2 3000 - 18.6 93.7 15.4 78.3 - 19.5 - 51.7 - 17.4 130.9 3500 - 18.1 76.1 15.2 61.8 - 19.8 - 61.0 - 16.2 125.1 4000 - 16.4 76.9 15.1 44.9 - 19.9 - 68.8 - 14.4 109.0 4500 - 15.7 65.7 14.8 28.2 - 20.3 - 78.5 - 13.3 99.6 5000 - 16.2 67.4 14.6 11.9 - 20.4 - 86.8 - 12.9 91.7 5500 - 17.6 62.5 14.5 - 5.0 - 21.0 - 94.9 - 11.6 85.0 6000 - 15.9 53.6 14. 2 - 21.7 - 21.5 - 103.1 - 11.1 82.5 datasheet: rev g 0 8 / 15 /14 - 3 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp369180 dc- 6 ghz gain block tqp369180 - pcb evaluation board c2 c1 l1 c3 j4 j3 j1 j2 q1 r1 q1 j2 rf output j4 gnd j3 vsupply 1 2,4 3 j1 rf input l1 39 nh r1 24 ? c3 56 pf c2 56 pf c1 0.018 uf vcc notes: 1. see evaluation board pcb information section for material and stack - up. 2. all components are of 0603 size unless otherwise stated. bill of material ? tqp369180 - pcb referen ce des. value description manuf. part number q1 n/a high linearity lna gain block triquint tqp369180 c1 0.018 uf cap, chip, 0603, 16v, x7r, 10% various c2, c3 56 pf cap, chip, 0603, 50v, npo, 5% various l1 39 nh inductor, 0603, 5%, cs series coilcraf t 0603cs - 39nxjl r1  res, chip, 0805, 1/10w, 5% various component values for specific frequencies frequency (mhz) 50 500 900 1900 2200 2500 3500 l1 820 nh 220 nh 68 nh 27 nh 22 nh 18 nh 15 nh c2, c3 .018 uf 1000 pf 100 pf 68 pf 68 pf 56 pf 39 pf bias resistor va lues for various supply voltages v supply (v) 5 6 7 8 9 10 12 r1 24  47  68  91  110  130  180  component size 0805 1206 1210 1210 1210 2010 2010 datasheet: rev g 0 8 / 15 /14 - 4 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp369180 dc- 6 ghz gain block typical performance ? tqp369180 - pcb test conditions unless otherwise noted: v supply =+5 v, r 1 = 24 , i cc = 45 ma, t case = +25 c parameter typical value units frequency 500 900 1900 2100 2600 3500 4000 5000 6000 mhz gain 15.7 15. 5 15. 0 14.9 14.8 15.2 15.1 14.6 14.2 db input return loss - 15.8 - 20.9 - 20.1 - 18.0 - 14.1 - 18.1 - 16.4 - 16.2 - 15.9 db output return loss - 15.9 - 25.0 - 17.8 - 15.9 - 12.9 - 16.2 - 14.4 - 12.9 - 11.1 db output p1db +15.3 +15.2 +14.4 +14.1 +13.8 13.75 12.6 11 9.4 dbm oip3 +30.2 +29.8 +29.5 +28.1 +26.8 26.1 24.6 22 20.5 dbm noise f igure 3.6 3.6 3.6 3.7 3.8 4 4.1 4.2 4.5 db not es: 1. oip3 measured with two tones at an output power of 0 dbm / tone separated by 1 mhz. performance plots ? tqp369180 - pcb test conditions unless otherwise noted: v supply =+5 v, r 1 = 24 , i cc = 45 ma, t case = +25 c 4 8 12 16 20 0 1000 2000 3000 4000 5000 6000 gain (db) frequency (mhz) gain vs. frequency over temp +85 c +25 c 40 c - 40 - 30 - 20 - 10 0 0 1000 2000 3000 4000 5000 6000 input return loss (db) frequency (mhz) input return loss vs. freq over temp +85 c +25 c 40 c - 40 - 30 - 20 - 10 0 0 1000 2000 3000 4000 5000 6000 output return loss (db) frequency (mhz) output return loss vs. freq over temp +85 c +25 c 40 c 22 24 26 28 30 32 - 3 - 2 - 1 0 1 2 3 oip3 (dbm) output power/tone (dbm) oip3 vs. output power/tone freq.=1900 mhz 1 mhz tone spacing +85 c +25 c ?40 c 12 13 14 15 16 17 18 - 40 - 15 10 35 60 85 p1db (dbm) temperature (deg. c) p1db vs. temperature 900 mhz 1 900 mhz 10 15 20 25 30 35 40 0 1000 2000 3000 4000 5000 6000 oip3 (dbm) frequency (mhz) oip3 vs. frequency 1 mhz tone spacing pout=0 dbm.per tone temp.=+25 c 0 5 10 15 20 25 30 0 1000 2000 3000 4000 5000 6000 p1db (dbm) frequency (mhz) p1db vs. frequency temp.=+25 c temp.=+25 c 0 2 4 6 8 0 1000 2000 3000 4000 5000 6000 nf (db) frequency (mhz) nf vs. frequency temp.=+25 c temp.=+25 c temp.=+25 c 0 10 20 30 40 50 60 0 500 1000 1500 2000 2500 3000 oip2 (dbm) frequency, f1 + f2 (mhz) oip2 vs. frequency pout/tone = 0 dbm datasheet: rev g 0 8 / 15 /14 - 5 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp369180 dc- 6 ghz gain block pin configuration and description rf in gnd rf out gnd 1 2 3 4 pin no. label description 1 rf in rf i nput, matched to 50 ohms. external dc block is required. 3 rf out rf o utput / dc supply , matched to 50 ohms . external dc bl k bi h k d d i i i i d 2, 4, backside paddle gnd paddle rf/dc ground. use recommended via pattern to minimize in ductance and thermal resistance. see pcb mounting pattern for suggested footprint. evaluation board pcb information triquint pcb 10 75825 material and stack - up 50 ohm line dimensions: width=0.028" spacing=0.028" datasheet: rev g 0 8 / 15 /14 - 6 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp369180 dc- 6 ghz gain block package marking and dimensions marking: part number ? 369180 lot code ? aaxxxx n otes : 1. all dimensions are in millimeters. angles are in degrees. 2. dimen sion and tolerance formats conform to asme y14.4m - 1994. 3. the terminal #1 identifier and terminal numbering conform to jesd 95 - 1 spp- 012. 4. contact plating: nipdau pcb mounting pattern n otes : 1. all dimensions are in millimeters. angles are in degrees. 2. use 1 oz. copper minimum for top and bottom layer metal. 3. vias are required under the backside paddle of this device for proper rf/dc grounding and thermal dissipation. 4. do not remove or minimize via hole structure in the pcb. thermal and rf grounding is critical. 5. we recommend a 0.35mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.10?). 6. ensure good package backside paddle solder attach for reliable operation and best electrical performance. 1.62 (.064) 4.40 (.173) .35 (.014) .36 (.014) .44 (.017) 1.40 (.055) d1 d c b1 b symbol a 4.60 (.181) 4.50 (.177) 1.83 (.072) 1.73 (.068) 1.60 (.063) max .44 (.017) .48 (.019) .56 (.022) .50 (.020) .40 (.016) .42 (.0165) 1.50 (.059) typ min 3.94 (.155) 2.13 (.084) 2.29 (.090) e h l e1 e1 e symbol 2.29 (.090) 2.60 (.102) 4.25 (.167) 1.20 (.047) 1.50 bsc (.059) 1.10 (.043) 4.10 (.161) 3.00 bsc (.118) 2.20 (.087) 2.50 (.098) max min .89 (.035) typ 7 b e e1 2x b1 e l h d1 d c e1 d1 d1 alternate backside patterns - reflow compatible (part may be supplied with either pattern) a half etching depth 0.001" 369180 aaxxx x datasheet: rev g 0 8 / 15 /14 - 7 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp369180 dc- 6 ghz gain block product compliance information esd sensitivity ratings caution! esd - sensitive device esd rating: class 1 c value: 1000 v and < 2 000 v test: human body model (hbm) standard: jedec standard jesd22 - a114 esd rating: class c3 value: 1000 v test: charged device model (cdm) standard: jedec standard jesd22 - c101 solderability compatible with both lead - free (260c maximum reflow temperature) and tin/lead (245c maximum reflow temperature) soldering processes. contact plating: nipdau rohs compliance this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazardous substances in electrical and electronic equipment). this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp - a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free msl rating msl rating: level 1 test: 260c convection reflow standard: jedec standard ipc/jedec j - std - 020 contact information for the latest specifications, additiona l product information, worldwide sales and distribution locations, and information about triquint: web: www.triquint.com tel: +1.503.615.9000 email: info - sales@t riqu int .com fax: +1.503.615.8902 for technical questions and application information: email: sjcapplications.engineering@ triquint .com important notice the information contained herein i s believed to be reliable. triquint makes no warranties regarding the information contained herein. triquint assumes no responsibility or liability whatsoever for any of the information contained herein. triquint assumes no responsibility or liability w hatsoever for the use of the information contained herein. the information contained herein is provided "as is, where is" and with all faults, and the entire risk associated with such information is entirely with the user. all information contained herei n is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for triquint products. the information contained herein or any use of such information does not grant, explicitly or implicitl y, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. triquint products are not warranted or authorized for use as critical compon ents in medical, life - saving, or life - sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. datasheet: rev g 0 8 / 15 /14 - 8 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com


▲Up To Search▲   

 
Price & Availability of TQP369180-15

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X