rev: 3 .0 created on: february 21, 2014 created by: mks approved by: bp page | 1 wpant10022 - c 2d 9 15 mhz pifa antenna description / application this stamped metal pifa antenna can be installed inside any wireless device. it is a surface independent antenna, in the sense it will work the same whether it is installed on a metallic or a non - met allic surface. it comes with a 3.15 long standard 1.32mm od micro c o - ax cable and ip x / hirose equivalent connector . we can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assi st to trouble shoot system integration issues such as trp/tis a nd fcc requirements. we specialize in developing customized antenna solutions . please contact sales@worldproducts.com with your specific application requirements. electrical properties operating frequency 90 0 C 9 30 mhz approximate antenna impedance [ ? ] 50? vswr C typical < 2 :1 peak gain [dbi] (typical) device and application dependent efficiency [%] (typical) device and application dependent polarization linear pattern omni - d irectional note : the above mentioned performance metrics were recorded with the antenna embedded inside the clients device. mechanical / environmental properties antenna dimensions 1.9 x 1.8 x 0.6 ( 47.75mm x 46.5mm x 14.5mm ) antenna color silver cable 3.15 long 1.32mm od micro co - ax connector ipx / hirose equivalent operating / storage temperature - 40 o c to +90 o c environmental meets standards for ul 94v - 0 hazardous materials rohs compliant
rev: 3 .0 created on: february 21, 2014 created by: mks approved by: bp page | 2 picture s of the antenna (3d drawing)
rev: 3 .0 created on: february 21, 2014 created by: mks approved by: bp page | 3 vswr of the antenna
|