type bss127 sipmos ? small-signal-transistor features ? n-channel ? enhancement mode ? logic level (4.5v rated) ? d v /d t rated ? 100%lead-free; rohs compliant ? qualified according to aec q101 ? halogen-free according to iec61249-2-21 maximum ratings, at t j =25 c, unless otherwise specified parameter symbol conditions unit continuous drain current i d t a =25 c 0.021 a t a =70 c 0.017 pulsed drain current i d,pulse t a =25 c 0.09 reverse diode d v /d t d v /d t i d =0.021 a, v ds =480 v, d i /d t =200 a/s, t j,max =150 c 6 kv/s gate source voltage v gs 20 v esd class (jesd22-a114-hbm) 0 (<250) power dissipation p tot t a =25 c 0.50 w operating and storage temperature t j , t stg -55 ... 150 c iec climatic category; din iec 68-1 55/150/56 value v ds 600 v r ds(on),max 500 ? i d 0.021 a product summary pg-sot-23 type package pb-free halogen-free tape and reel information marking bss127 pg-sot-23 yes yes h6327: 3000pcs/reel sis rev. 2.01 page 1 2010-05-07
bss127 parameter symbol conditions unit min. typ. max. thermal characteristics thermal resistance, junction - minimal footprint r thja - - 250 k/w electrical characteristics, at t j =25 c, unless otherwise specified static characteristics drain-source breakdown voltage v (br)dss v gs =0 v, i d =250 a 600 - - v gate threshold voltage v gs(th) v ds =v gs , i d =8 a 1.4 2.0 2.6 drain-source leakage current i d (off) v ds =600 v, v gs =0 v, t j =25 c - - 0.1 a v ds =600 v, v gs =0 v, t j =150 c --10 gate-source leakage current i gss v gs =20 v, v ds =0 v - 10 100 na drain-source on-state resistance r ds(on) v gs =4.5 v, i d =0.016 a - 330 600 ? v gs =10 v, i d =0.016 a - 310 500 transconductance g fs | v ds |>2| i d | r ds(on)max , i d =0.01 a 0.007 0.015 - s values rev. 2.01 page 2 2010-05-07
bss127 parameter symbol conditions unit min. typ. max. dynamic characteristics input capacitance c iss -2128pf output capacitance c oss - 2.4 3 reverse transfer capacitance c rss - 1.0 1.5 turn-on delay time t d(on) - 6.1 19.0 ns rise time t r - 9.7 14.5 turn-off delay time t d(off) -14 21 fall time t f - 115 170 gate charge characteristics gate to source charge q gs - 0.07 0.10 nc gate to drain charge q gd - 0.31 0.5 gate charge total q g - 0.65 1.0 gate plateau voltage v plateau - 3.56 - v reverse diode diode continous forward current i s - - 0.016 a diode pulse current i s,pulse - - 0.09 diode forward voltage v sd v gs =0 v, i f =0.016 a, t j =25 c - 0.82 1.2 v reverse recovery time t rr - 160 240 ns reverse recovery charge q rr - 13.2 19.8 nc v r =300 v, i f =0.016 a, d i f /d t =100 a/s t a =25 c values v gs =0 v, v ds =25 v, f =1 mhz v dd =300 v, v gs =10 v, i d =0.01 a, r g =6 ? v dd =300 v, i d =0.01 a, v gs =0 to 10 v rev. 2.01 page 3 2010-05-07
bss127 1 power dissipation 2 drain current p tot =f( t a ) i d =f( t a ); v gs 10 v 3 safe operating area 4 max. transient thermal impedance i d =f( v ds ); t a =25 c; d =0 z thja =f( t p ) parameter: t p parameter: d = t p / t 10 s 100 s 1 ms 10 ms dc 10 3 10 2 10 1 10 0 10 -1 10 -2 10 -3 10 -4 v ds [v] i d [a] limited by on-state resistance 100 ms single pulse 0.01 0.02 0.05 0.1 0.2 0.5 10 3 10 2 10 1 10 0 10 -1 10 -2 10 -3 10 -4 10 -5 10 3 10 2 10 1 10 0 10 -1 t p [s] z thja [k/w] 0 0.1 0.2 0.3 0.4 0.5 0.6 0 40 80 120 160 t a [c] p tot [w] 0 0.005 0.01 0.015 0.02 0.025 0.03 0 40 80 120 160 t a [c] i d [a] rev. 2.01 page 4 2010-05-07
bss127 5 typ. output characteristics 6 typ. drain-source on resistance i d =f( v ds ); t j =25 c r ds(on) =f( i d ); t j =25 c parameter: v gs parameter: v gs 7 typ. transfer characteristics 8 typ. forward transconductance i d =f( v gs ); | v ds |>2| i d | r ds(on)max g fs =f( i d ); t j =25 c 0 0.005 0.01 0.015 0.02 0.025 01234 v gs [v] i d [a] 0 0.005 0.01 0.015 0.02 0.025 0.000 0.005 0.010 0.015 0.020 i d [a] g fs [s] 2.6 v 3 v 3.2 v 3.6 v 3.8 v 4 v 5 v 10 v 0 0.005 0.01 0.015 0.02 0.025 0.03 0246810 v ds [v] i d [a] 2.6 v 3 v 3.2 v 3.6 v 3.8 v 4 v 5 v 10 v 0 200 400 600 800 1000 0 0.005 0.01 0.015 0.02 0.025 i d [a] r ds(on) [ ? ] rev. 2.01 page 5 2010-05-07
bss127 9 drain-source on-state resistance 10 typ. gate threshold voltage r ds(on) =f( t j ); i d =0.016 a; v gs =10 v v gs(th) =f( t j ); v ds =v gs ; i d =8 a parameter: i d 11 typ. capacitances 12 forward characteristics of reverse diode c =f( v ds ); v gs =0 v; f =1 mhz; t j =25c i f =f( v sd ) parameter: t j typ max 0 100 200 300 400 500 600 700 800 900 1000 -60 -20 20 60 100 140 180 t j [c] r ds(on) [ ? ] ciss coss crss 10 2 10 1 10 0 10 -1 0 5 10 15 20 25 v ds [v] c [pf] 25 c 150 c 25 c, 98% 150 c, 98% 10 -1 10 -2 10 -3 0 0.4 0.8 1.2 1.6 2 2.4 2.8 v sd [v] i f [a] max typ min 0 0.5 1 1.5 2 2.5 3 3.5 -60 -20 20 60 100 140 180 t j [c] v gs(th) [v] rev. 2.01 page 6 2010-05-07
bss127 13 typ. gate charge 14 drain-source breakdown voltage v gs =f( q gate ); i d =0.01 a pulsed v br(dss) =f( t j ); i d =250 a parameter: v dd 15 gate charge waveforms 500 520 540 560 580 600 620 640 660 680 700 -60 -20 20 60 100 140 180 t j [c] v br(dss) [v] 120 v 300 v 480 v 0 1 2 3 4 5 6 7 8 9 10 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 q gate [nc] v gs [v] v gs q gate v gs(th) q g(th) q gs q gd q sw q g rev. 2.01 page 7 2010-05-07
bss127 sot-23 package outline: footprint: packaging: rev. 2.01 page 8 2010-05-07
bss127 published by infineon technologies ag 81726 munich, germany ? 2009 infineon technologies ag all rights reserved. legal disclaimer the information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. with respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, infineon technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. information for further information on technology, delivery terms and conditions and prices, please contact the nearest infineon technologies office (www.infineon.com ). warnings due to technical requirements, components may contain dangerous substances. for information on the types in question, please contact the nearest infineon technologies office. infineon technologies components may be used in life-support devices or systems only with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered. rev. 2.01 page 9 2010-05-07
|
