spe - 12 - 8 - 135 /a/wy page 1 of 3 specification part no. : empcb.mmcxfst j. a. ht product name : mmcx (f) jack for edge pcb mount feature : mmcx (f) jack straight edge mount pcb jack frequency range: dc up to 6 ghz finish: gold leg length: 2.9 mm total length: 7.4 mm rohs compliant
spe - 12 - 8 - 135 /a/wy page 2 of 3 1. introduction the empcb.mmcxfstj.a .ht connector was designed to be mounted on a pcb edge . the edge mount configuration allows the c onnector to be easily slotted onto a pcb board ; the maximum thickness of pcb that the connector can be used with is 0.8m m. the con nector pin is directly soldered on to pads on the pcb . taoglas connectors are all rohs compliant. 2. specification electrical impedance 50? frequency range dc ~ 6 ghz working voltage max. 170 v rms dielectric withstanding voltage 500 vrms insula tion resistance 1 000m ohms mechanical connector dimension 7.4mm* ? 4.5 mm max. t hickness pcb acceptable 0.8 mm connector pin diameter 0.7 mm c onnector type mmcx (f) to pcb edge mounted environmental rohs compliant
spe - 12 - 8 - 135 /a/wy page 3 of 3 3. connector drawing name m aterial finish qty 1 body brass gold 1 2 insulator teflon white 1 3 female contact phosphor bronze gold 1 taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make c hanges to specifications and product descriptions at any time without notice. taoglas reserves all rights to this document and the information contained herein. reproduction, use or disclosure to third p arties without express permission is strictly prohibited. copyright ? 2012, taoglas ltd.
|