www.rfm.com e-mail: info@rfm.com page 1 of 3 ? 2011-2012 by rf monolithics, inc. RF3619D - 5/10/12 electrical characteristics characteristic sym notes minimum typical maximum units center frequency at 25 c f c 1, 2, 3 404.0 mhz insertion loss il min 1, 3 2.1 2.3 db passband ripple, 402-405 mhz 1, 3 0.6 0.8 db 3 db bandwidth bw 3 15.06.0 mhz attenuation relative to il min : 1, 3 db 398.5 mhz 30 35 408.5 mhz 25 45 383.5 mhz 40 50 423.5 mhz 38 48 freq. temp. coefficient ftc -37 ppm/k frequency aging, first year |fa| 5 ? 10 ppm single-ended input/output impedance match 1 50 ohms differential input/output impedance match 1 150 ohms lid symbolization (y=year ww=week s=shift) a15, ywws standard reel quantity reel size 7 inch 9 500 pieces/reel reel size 13 inch 3000 pieces/re el ? 402 to 405 mhz medical band front-end filter ? single-ended input/outout operation ? complies with directive 2002/95/ec (rohs) rating value units input power level +10 dbm dc voltage on any non-ground pin 3 v operating temperature range -10 to +60 c storage temperature range in tape and reel -40 to +85 c solder reflow temperature, 10 seconds, 5 cycles maximum 260 c 404.0 mhz saw filter RF3619D sm3838-8 case 3.8 x 3.8 caution: electrostatic sensitive devi ce. observe precautio ns for handling. notes: 1. unless noted otherwise, all measurements are made with the filt er installed in the specified test fixture which is connected to a 50 ? test system. 2. the frequency f c is defined as the midpoint between the 3 db frequencies. 3. where noted specifications apply over the entire specif ied operating temperature range of -10 c to +60 c. 4. frequency aging is the change in fc with time and is specified at +65 c or less. aging may exceed the specification for prol onged temperatures above +65 c. typically, aging is greatest the first year af ter manufacture, decreasing signi ficantly in subsequent years. 5. the design, manufacturing proc ess, and specifications of th is device are subject to change. 6. one or more of the following u.s. patents apply: 4,54,488, 4,616,197, and others pending. 7. all equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sa le. 8. tape and reel standard per ansi / eia 481. 9. this product complies with directive 2002/95/ec of the eu ropean parlament and of the council of 27 january 2003 on the restri ction of the use of certain hazadous substances in el ectrical and electronic equipment. pb absolute maximum ratings www.datasheet.net/ datasheet pdf - http://www..co.kr/
www.rfm.com e-mail: info@rfm.com page 2 of 3 ? 2011-2012 by rf monolithics, inc. RF3619D - 5/10/12 filter response plots www.datasheet.net/ datasheet pdf - http://www..co.kr/
www.rfm.com e-mail: info@rfm.com page 3 of 3 ? 2011-2012 by rf monolithics, inc. RF3619D - 5/10/12
pin connection 1 ground 2 ground 3 input 4 ground 5 ground 6 ground 7 output 8 ground electrical connections a 1 2 3 b 7 6 5 4 c h 7 6 5 4 e f g 1 2 3 8 8 d case dimensions dimension mm inches min nom max min nom max a 3.6 3.8 4.0 0.14 0.15 0.16 b 3.6 3.8 4.0 0.14 0.15 0.16 c 1.00 1.20 1.40 0.04 0.05 0.055 d 0.95 1.10 1.25 0.033 0.043 0.05 e 0.90 1.0 1.10 0.035 0.04 0.043 f 0.50 0.6 0.70 0.020 0.024 0.028 g 2.39 2.54 2.69 0.090 0.100 0.110 h 1.40 1.75 2.05 0.055 0.069 0.080 a15 ywws 0.066 0.055 typ. (1.68) (1.40) 0 . 0 2 9 t y p . ( o . 7 4 ) 0 . 0 5 0 t y p . ( 1 . 2 7 ) 0 . 0 0 2 ( 0 . 0 5 ) 0 . 0 9 0 ( 2 . 2 9 ) 0 . 0 3 3 ( 0 . 8 4 ) pcb land pattern filter primary connection diagram filter primary pin connection 1 ground 2 ground 3 input 4 ground 5 ground 6 ground 7 output 8 ground pin connection 1 ground 2 ground 3 input 4 ground 5 ground 6 ground 7 output 8 ground pin connection 1 ground 2 input 3 ground 4 ground 5 ground 6 output 7 ground 8 ground filter alternate electrical connections connection diagram filter alternate www.datasheet.net/ datasheet pdf - http://www..co.kr/
|
