published date : feb 28, 2008 drawing no : sdsa6483 v1 checked : s hin chi p.1/4 part number: ZFVG129A2 surface mount display www.sunled.com absolute maximum ratings (ta=25c ) vg (ingaalp) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 150 ma power dissipation p t 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 vg (ingaalp) unit forward voltage (typ.) (i f =10ma) v f 2.0 v forward voltage (max.) (i f =10ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =10ma) p 574 nm wavelength of dominant emission (typ.) (i f =10ma) d 570 nm spectral line full width at half-maximum (typ.) (i f =10ma) ? 20 nm capacitance (typ.) (v f =0v, f=1mhz) c 15 pf operating characteristics (ta=25c ) part number emitting color emitting material luminous intensity (if=10ma) ucd wavelength nm p description min. typ. ZFVG129A2 green ingaalp 8000 19990 574 common anode. rt. hand decimal notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0. 01") unless otherwise noted. 3. the gap between the reflector and pcb shall not exceed 0.25mm. 4.specifications are subject to change without notice. preliminary spec features 0.51 inch digit height. low current operation. excellent character appearance. i.c. compatible. mechanically rugged. gray face,white segment. package : 200pcs / reel. moisture sensitivity level : level 4. rohs compliant.
published date : feb 28, 2008 drawing no : sdsa6483 v1 checked : s hin chi p.2/4 part number: ZFVG129A2 surface mount display www.sunled.com ? vg remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : feb 28, 2008 drawing no : sdsa6483 v1 checked : s hin chi p.3/4 part number: ZFVG129A2 surface mount display www.sunled.com ? recommended soldering patte rn (units : mm;tolerance: 0.15) ? tape specification (units : mm)
published date : feb 28, 2008 drawing no : sdsa6483 v1 checked : s hin chi p.4/4 part number: ZFVG129A2 surface mount display www.sunled.com packing & label specifications ZFVG129A2
|