november.22,2007 saw rejection filter for isdb - t (1seg ) murata part number : SAEHD832MWA0B00 : unbalance port : unbalance port : ground : mm package dimensions specification 1/4 marking : laser printing : unbalance port : : ground (7) (3) others unit nominal center frequency(fc) 1) 90 to 222 mhz 10 db min. 11 db min. 13.1 db 2) 470 to 710 mhz 2.3 db max. 2 db max. 1.75 db 3) 710 to 770 mhz 3.5 db max. 3 db max. 2.82 db 4) 824 to 840 mhz 38 db min. 40 db min. 42.0 db 5) 898 to 925 mhz 40 db min. 41 db min. 43.5 db 6) 1427.9 to 1447.9 mhz 42 db min. 43 db min. 48.5 db 7) 1749.9 to 1784.9 mhz 49 db min. 50 db min. 58.1 db 8) 1920 to 1980 mhz 46 db min. 47 db min. 53.2 db input signal level 251mw(+24dbm), 50000hours 50 w unbalance port impedance (nominal) 832mhz 911.5 mhz insertion loss item specification -30 to 85c 252c typ. (4) (7) (6) (5) (1) (2) (3) (8) dot marking( ? 0.4 ) (c0. 2 0 ) (0. 125 ) (3) (2) ( 1 ) (7) (6) (5) ( 4 ) ( 8 ) 4 -0. 6 0 0. 05 4 -0. 375 0. 05 2.2 0. 1 2.65 0.1 8 -0. 40 0. 05 (0. 125 ) 8 - 040 0. 05 a t 1 w 1.0max.
november.22,2007 saw rejection filter for isdb - t (1seg ) murata part number : SAEHD832MWA0B00 frequency performance 2/4
november.22,2007 saw rejection filter for isdb - t (1seg ) murata part number : SAEHD832MWA0B00 3/4 dimensions of carrier tape dimensions of reel dimensions of tape unit: mm SAEHD832MWA0B00r12 2000pcs/reel unit: mm unit: mm SAEHD832MWA0B00r05 5000pcs/reel SAEHD832MWA0B00r00 10000pcs/reel a t1w a t1w a t1w cover tape direction of feed 2 . 0 0 0. 05 4.0 0.1 8.0 0.15 3.50 0.0 5 1.75 0.10 0.30 0. 05 1.3 - 0.05 2.95 0.1 4.0 0.1 2 . 5 0.1 + 0.1 3 max. +0.1 ? 1.5 -0.0 +0.1 ? 1.0 -0.0 3 max. 160 ... 1 9 0 80 ...1 2 0 4 0 0 ... 56 0 trailer tape components leader cavity unit : m m 2.0 0.5 9.0 0.5 13 .5max. ( ? 60) ?? 1 7 8 ) ? 13.0 0.5 15.5max. ( 10 0) ( 330 ) 9.5 1.0 2.0 0.5 13.0 0.5
november.22,2007 saw rejection filter for isdb - t (1seg ) murata part number : SAEHD832MWA0B00 4/4 recommended land pattern test circuit ? this pdf datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf datasheet has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. r1 : 50 r2 : 50 3 2 1 7 6 4 8 5 r 1 r 2 0. 4 0 1.95 0. 6 0 0.375 0. 40 2.4 : land pattern unit : mm
|