4-10 vol. 2 sales offices: visit our web site at http://www.temex.net standard crystal oscillator - xo ceramic package 7x5 qen101 ; plastic package qen62 consumer & industrial smd xo click her e to see the data-sheets of standar d cr ystal oscillators - xo
time &frequency c to +85 c frequency stability: 15 to 100 ppm supply voltage: +5 v, +3.3 v current consumption: @ (5 v): 25 to 50 ma @ (3.3 v): 12 to 20 ma load: @ (5v): 10 to 50 pf/10 ttl-gates (function of the frequency) @ (3.3 v): 15 pf option duty cycle: 50/50 10 % option: enable/disable on pin 1 ageing (at 45 c/1 st year) : < 5 ppm description the qen 60 series uses a hermetically sealed crystal unit mounted on a printed circuit board. the hermetically sealed crystal unit allows for controlled temperature performance as well as an improved ageing performance. the qen 60 series is more accurate than a dil xo and is well suited for high performance. they are available in 5 v and 3.3 v, and offer a ttl/hcmos compatible output up to 160 mhz in 5 v with a tristate option. the qen 60 uses a standard fundamental or overtone mode crystal to produce outputs up to 120 mhz. a pll technology can be used above 40 mhz to offer an extended frequency range up to 200 mhz. consumer & industrial smd xo minimum ordering information requirement (see t able 1 for available combinations) (see page 4-1 8 for package drawing) example: qen 60 - ahr 110 mhz dt50 / tr supply voltage a(h/t) = 5 v b(h/t) = 3.3 v option r = 50/50 10% i = enable/disable temperature range lq = 0 c ~ +70 c hq = -20 c ~ +70 c dt = -40 c ~ +85 c ? ? c calibration, temperature, vcc and load change, and rst year ageing. / qen 60-ah 5 v supply voltage qen 60-bh 3.3 v supply voltage 15ppm 15ppm 15ppm 15ppm 15ppm 15ppm 1.5 mhz - 40 mhz yes yes yes yes yes yes 40 mhz - 70 mhz yes yes yes yes yes yes 70 mhz - 100 mhz yes yes yes yes yes yes 100 mhz - 160 mhz yes yes yes table 1: other temperature ranges and stabilities available option enable / disable on pin 1 high = enable on pin 3 low = high z on pin 3
|