spec no: dsag3657 rev no: v.4 date: may/23/2006 page: 1 of 7 approved: j. lu checked: allen liu drawn: h.q.yuan erp: 1201001559 part number: aa3528rwc/j white description the source color devices are made with ingan on sic light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti - electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. attention observe precautions for handling electrostatic discharge sensitive device s preliminary spec features single color. suitable for all smt assembly and solder process. available on tape and reel. ideal for backlighting. package : 1500pcs / reel. moisture sensitivity level : level 4. electrostatic discha rge threshold (hbm):1000v. typ. color temperature:6500k color coordinates:x= 0.33,y=0.34 acc. to cie1931(white). optical efficiency:30 lm /w(typ.) color reproduction index:80 rohs compliant. applications traffic signaling. backlighting (illuminated advertising , general lighting). interior and exterior automotive lighting. substitution of micro incandescent lamps. reading lamps. signal and symbol luminaire for orientation. marker lights (e.g. steps, exit ways, etc). decorative and entertainment lighting. indoor and outdoor commercial and residential architectural lighting. package dimension s notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subject to change without notice . 3.5x2.8 mm smd chip led lamp
spec no: dsag3657 rev no: v.4 date: may/23/2006 page: 2 of 7 approved: j. lu checked: allen liu drawn: h.q.yuan erp: 1201001559 selection guid e parameter symbol value unit power dissipation p t 120 mw reverse voltage v r 5 v junction temperature t j 110 c operating temperature top - 40 to +85 c storage temperature tstg - 40 to +100 c dc forward current i f 30 ma peak forward current note4 i fm 100 ma thermal resistance junction/ambient note5 junction/solder point r t h ja r t h js 250 110 c/w c/w absolute maximum ratings at t a =25 c electrical / optical characteristics at t a =25 c parameter symbol value unit chromaticity coordinate x acc.to cie1931 i f =20ma [typ.] x note1 0.33 - chromaticity coordinate y acc.to cie1931 i f =20ma [typ.] y note1 0.34 - forward voltage i f =20ma [min.] v f note2 2.6 v forward voltage i f =20ma [typ.] 3.2 forward voltage i f =20ma [max.] 4.0 reverse current (v r =5v) [typ.] i r 0.01 a reverse current (v r =5v) [max.] 10 temperature coefficient of x i f =20ma, - 10 c t 100 c [typ.] tc x - 0.1 10 - 3 / c temperature coefficient of y i f =20ma, - 10 c t 100 c [typ.] tcy - 0.2 10 - 3 / c temperature coefficient of v f i f =20ma, - 10 c t 100 c [typ.] tc v - 2.5 mv / c part no. dice lens type luminous intensity note2 iv(mcd) @ 20 ma v (mlm) note3 @ 20 ma viewing angle note1 min. typ. typ. 2 ? 1/2 aa3528rwc/j white (ingan) water clear 380 800 1900 120 notes : 1 . 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 3.the typical data of luminous flux can only reflect statistical figures, actual parameters of individual product could differ f rom the typical data. for the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 duty cycle, 0.1ms pulse width. 5.rth(j - a) results from mounting on pc board fr4 (pad size 16 mm 2 per pad), notes: 1.chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of 0.01 in x and y color coordinates. 2.forward voltage is measured with a current pulse of 10ms at a tolerance of 0.1v.
spec no: dsag3657 rev no: v.4 date: may/23/2006 page: 3 of 7 approved: j. lu checked: allen liu drawn: h.q.yuan erp: 1201001559 white aa3528rwc/j brightness codes v (mlm) note2 @ 20 ma code. min. max. typ. r 380 550 1270 s 480 750 1720 t 650 1100 2380 u 900 1500 3150 v 1200 1800 3760 luminous intensity note1 iv(mcd) @ 20 ma notes : 1.luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 2.the typical data of luminous flux can only reflect statistical figures, actual parameters of individual product could differ f rom the typical data. for the purpose of product enhancement, the typical data is subject to change without prior notice.
spec no: dsag3657 rev no: v.4 date: may/23/2006 page: 4 of 7 approved: j. lu checked: allen liu drawn: h.q.yuan erp: 1201001559 aa3528rwc/j
spec no: dsag3657 rev no: v.4 date: may/23/2006 page: 5 of 7 approved: j. lu checked: allen liu drawn: h.q.yuan erp: 1201001559 color codes
spec no: dsag3657 rev no: v.4 date: may/23/2006 page: 6 of 7 approved: j. lu checked: allen liu drawn: h.q.yuan erp: 1201001559 aa3528rwc/j tape specifications (units : mm ) reel dimension recommended soldering pattern (units : mm ; ; ; ; tolerance: 0.1 )
spec no: dsag3657 rev no: v.4 date: may/23/2006 page: 7 of 7 approved: j. lu checked: allen liu drawn: h.q.yuan erp: 1201001559 packing & label specifications aa3528rwc/j
|
