View TA58M12F_5762783.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ta58m05, 06, 08, 09, 10, 12, 15f 2006-11-06 1 1 out mark 3 2 gnd in toshiba bipolar linear integrat ed cir cuit silicon monolithic ta58m05f, ta58m06f, ta58m08f, ta58m09f ta58m10f, TA58M12F, ta58m15f 500 ma low dropout voltage regulator the ta58m**f series consists of fi xed-positive-output, low-dropout regulators with an output current of 500 ma (max) that utilize pnp transistors for the output stage. low dropout voltage and standby current make the ta58m**f series suitable for applications requiring low power consumption. features ? maximum output current : 500 ma ? output voltage : 5 / 6 / 8 / 9 / 10 / 12 / 15 v ? output voltage accuracy : v out 3% (@t j = 25c) ? low-dropout voltage : 0.65 v (max) (@i out = 500ma) ? protection function : over current protection / thermal shutdown / reverse connection of power supply / 60 v load dump ? package type : surface-mount new pw-mold pin assignment marking note 1: the ? ** ? in each product name is replaced with the output voltage of each product. hsop3-p-2.30d weight : 0.36 g (typ.) lot no. a line indicates lead (pb) - free package or lead (pb) ? free finish. part no. (or abbreviation code) 1 2 58m**f 3
ta58m05, 06, 08, 09, 10, 12, 15f 2006-11-06 2 pin description pin no. symbol description 1 in input terminal. connected by capacitor (c in ) to gnd. 3 gnd ground terminal 2 out output terminal. connected by capacitor (c out ) to gnd. how to order product no. package package type and capacity ta58m**f(te16l1,nq (note2) new pw-mold: surface-mount tape (2000 pcs/reel) note 2: the ? ** ? in each product number is replaced with the output voltage of each product. block diagram over current protection over voltage protection/ thermal shutdown 1 2 3 in out gnd
ta58m05, 06, 08, 09, 10, 12, 15f 2006-11-06 3 absolute maximum rating (ta = 25c) characteristic symbol rating unit dc v in (dc) 29 v input voltage pulse v in (pulse) 60( =200ms) v output current i out 500 ma operating temperature t opr ?40~105 c junction temperature t j 150 c storage temperature t stg ?55~150 c ta = 25c 1 power dissipation tc = 25c p d 10 w note 3: do not apply current and voltage (including re verse polarity) to any pin that is not specified. note 4: using continuously under heavy loads (e.g. t he application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temper ature/current/voltage, etc. ) are within the absolute maximum ratings and the operating ranges. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/derating concept and methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). thermal characteristics characteristic symbol max unit thermal resistance, junction to ambient r th (j ? a) 125 ` / w thermal resistance, junction to case r th (j ? c) 12.5 ` / w protection function (reference) characteristic symbol test condition min typ. max unit thermal shutdown t sd ? 170 ? c thermal shutdown hysteresis width t sd(hys) v in = 14 v (05~06f)/ 16 v (08~10f)/ 18 v (12f)/ 20 v (15f) ? 20 ? c peak circuit current i peak v in = 14 v (05~06f)/ 16 v (08~10f)/ 18 v (12f)/ 20 v (15f), t j = 25c ? 1 ? a short circuit current i sc v in = 14 v (05~06f)/ 16 v (08~10f)/ 18 v (12f)/ 20 v (15f), t j = 25c ? 600 ? ma overvoltage protection v in t j = 25c 29 33 ? v note 5: ensure that the devices operate within th e limits of the maximum rating when in actual use. note 6: when the input voltage exceeds 29 v, the overvoltage protection circuit is activated to turn off the output voltage.
ta58m05, 06, 08, 09, 10, 12, 15f 2006-11-06 4 ta58m05f electrical characteristics (unl ess otherwise specified, t j = 25c) characteristic symbol test condition min typ. max unit v in = 14 v, i out = 250 ma 4.85 5.00 5.15 output voltage v out 6 v < = v in < = 26 v, i out = 250 ma, -40c < = t j < = 105c 4.8 5.0 5.2 v 9 v < = v in < = 16 v, i out = 250 ma ? 2 20 line regulation reg :/ line 6 v < = v in < = 26 v, i out = 250 ma ? 5 30 mv load regulation reg :/ load v in = 14 v, 5 ma < = i out < = 500 ma ? 20 60 mv 6 v < = v in < = 26 v, i out = 0 a ? 0.5 1.0 quiescent current i b 6 v < = v in < = 26 v, i out = 500 ma ? 35 80 ma i out = 250 ma ? 0.22 0.35 dropout voltage v d i out = 500 ma ? 0.42 0.65 v ta58m06f electrical characteristics (unl ess otherwise specified, t j = 25c) characteristic symbol test condition min typ. max unit v in = 14 v, i out = 250 ma 5.82 6.00 6.18 output voltage v out 7 v < = v in < = 26 v, i out = 250 ma, -40c < = t j < = 105c 5.76 6.00 6.24 v 10 v < = v in < = 17 v, i out = 250 ma ? 2 20 line regulation reg :/ line 7 v < = v in < = 26 v, i out = 250 ma ? 5 30 mv load regulation reg :/ load v in = 14 v, 5 ma < = i out < = 500 ma ? 20 60 mv 7 v < = v in < = 26 v, i out = 0 a ? 0.5 1.0 quiescent current i b 7 v < = v in < = 26 v, i out = 500 ma ? 35 80 ma i out = 250 ma ? 0.22 0.35 dropout voltage v d i out = 500 ma ? 0.42 0.65 v
ta58m05, 06, 08, 09, 10, 12, 15f 2006-11-06 5 ta58m08f electrical characteristics (unl ess otherwise specified, t j = 25c) characteristic symbol test condition min typ. max unit v in = 16 v, i out = 250 ma 7.76 8.00 8.24 output voltage v out 9 v < = v in < = 26 v, i out = 250 ma, -40c < = t j < = 105c 7.68 8.00 8.32 v 12 v < = v in < = 19 v, i out = 250 ma ? 2 20 line regulation reg :/ line 9 v < = v in < = 26 v, i out = 250 ma ? 5 30 mv load regulation reg :/ load v in = 16 v, 5 ma < = i out < = 500 ma ? 20 70 mv 9 v < = v in < = 26 v, i out = 0 a ? 0.5 1.0 quiescent current i b 9 v < = v in < = 26 v, i out = 500 ma ? 35 80 ma i out = 250 ma ? 0.22 0.35 dropout voltage v d i out = 500 ma ? 0.42 0.65 v ta58m09f electrical characteristics (unl ess otherwise specified, t j = 25c) characteristic symbol test condition min typ. max unit v in = 16 v, i out = 250 ma 8.73 9.00 9.27 output voltage v out 10 v < = v in < = 26 v, i out = 250 ma, -40c < = t j < = 105c 8.64 9.00 9.36 v 13 v < = v in < = 20 v, i out = 250 ma ? 2 20 line regulation reg :/ line 10 v < = v in < = 26 v, i out = 250 ma ? 5 30 mv load regulation reg :/ load v in = 16 v, 5 ma < = i out < = 500 ma ? 20 70 mv 10 v < = v in < = 26 v, i out = 0 a ? 0.6 1.0 quiescent current i b 10 v < = v in < = 26 v, i out = 500 ma ? 35 80 ma i out = 250 ma ? 0.22 0.35 dropout voltage v d i out = 500 ma ? 0.42 0.65 v
ta58m05, 06, 08, 09, 10, 12, 15f 2006-11-06 6 ta58m10f electrical characteristics (unl ess otherwise specified, t j = 25c) characteristic symbol test condition min typ. max unit v in = 16 v, i out = 250 ma 9.7 10.0 10.3 output voltage v out 11 v < = v in < = 26 v, i out = 250 ma, -40c < = t j < = 105c 9.6 10.0 10.4 v 14 v < = v in < = 21 v, i out = 250 ma ? 2 30 line regulation reg :/ line 11 v < = v in < = 26 v, i out = 250 ma ? 5 40 mv load regulation reg :/ load v in = 16 v, 5 ma < = i out < = 500 ma ? 20 80 mv 11 v < = v in < = 26 v, i out = 0 a ? 0.6 1.2 quiescent current i b 11 v < = v in < = 26 v, i out = 500 ma ? 35 80 ma i out = 250 ma ? 0.22 0.35 dropout voltage v d i out = 500 ma ? 0.42 0.65 v TA58M12F electrical characteristics (unl ess otherwise specified, t j = 25c) characteristic symbol test condition min typ. max unit v in = 18 v, i out = 250 ma 11.64 12.00 12.36 output voltage v out 13 v < = v in < = 26 v, i out = 250 ma, -40c < = t j < = 105c 11.52 12.00 12.48 v 16 v < = v in < = 23 v, i out = 250 ma ? 2 30 line regulation reg :/ line 13 v < = v in < = 26 v, i out = 250 ma ? 5 40 mv load regulation reg :/ load v in = 18 v, 5 ma < = i out < = 500 ma ? 20 80 mv 13 v < = v in < = 26 v, i out = 0 a ? 0.7 1.2 quiescent current i b 13 v < = v in < = 26 v, i out = 500 ma ? 35 80 ma i out = 250 ma ? 0.22 0.35 dropout voltage v d i out = 500 ma ? 0.42 0.65 v
ta58m05, 06, 08, 09, 10, 12, 15f 2006-11-06 7 ta58m15f electrical characteristics (unl ess otherwise specified, t j = 25c) characteristic symbol test condition min typ. max unit v in = 20 v, i out = 250 ma 14.55 15.00 15.45 output voltage v out 16 v < = v in < = 26 v, i out = 250 ma, -40c < = t j < = 105c 14.4 15.0 15.6 v 19 v < = v in < = 26 v, i out = 250 ma ? 2 30 line regulation reg :/ line 16 v < = v in < = 26 v, i out = 250 ma ? 5 40 mv load regulation reg :/ load v in = 20 v, 5 ma < = i out < = 500 ma ? 30 100 mv 16 v < = v in < = 26 v, i out = 0 a ? 0.7 1.4 quiescent current i b 16 v < = v in < = 26 v, i out = 500 ma ? 35 80 ma i out = 250 ma ? 0.22 0.35 dropout voltage v d i out = 500 ma ? 0.42 0.65 v
ta58m05, 06, 08, 09, 10, 12, 15f 2006-11-06 8 electrical characteristics common to all products ? tj = 25c in the measurement conditions of each item is a regulation for where the standard condition when a pulse test is carried out, and any drif t in the electrical characteristic due to a rise in the junction temperature of the chip may be disregarded. standard application circuit ? place c in as close as possible to the input terminal and gnd. place c out as close as possible to the output terminal and gnd. although capacitor c out acts to smooth the dc output voltage during suspension of output oscillation or load change, it might cause output oscillation in a cold environment due to increased capacitor esr. it is therefore recommended to use a capacitor with small variations temperature sensitivity. the ic may oscillate due to external conditions (output current, temperature, or the type of the capacitor used). the type of capacitor required must be determined by the actual application circuit in which the ic is used. c in 0.1 f in out gnd load c out more than 33 f ta58m**f
ta58m05, 06, 08, 09, 10, 12, 15f 2006-11-06 9 ta58m05f v in = 14 v i out = 5 ma 0 2 8 10 12 0 20 40 80 100 120 ambient temperature ta (c ) allowable power dissipation p d max. (w) p d max. ? ta condition: number of ic = 1 reflow soldering on a ceramic substrate output current i out (a) v out ? i out input voltage v in (v) i b ? v in quiescent current i b (ma) output voltage v out (v) 60 140 160 ta = tc v out ? t j output voltage v out (v) junction temperature t j (c) 4.50 5.50 4.75 0 -50 150 50 100 5.25 5.00 input voltage v in (v) v out ? v in output voltage v out (v) 0 5 6 0 6 10 3 2 2 4 1 4 8 ta58m05f tj = 25 c input voltage v in (v) v out ? v in output voltage v out (v) 0 5 6 0 20 35 3 2 5 4 1 15 30 ta58m05f tj = 25 c 10 25 i out = 250 ma 5 ma 0 5 6 3 2 4 1 0 0.6 1.2 0.2 0.4 1.0 0.8 ta58m05f v in = 14 v tj = 25 c ta58m05f tj = 25 c 0 20 30 10 15 25 0 50 60 10 40 20 30 50500.8mmt 30300.8mmt singl 6 4 100 ma i out = 250 ma 5 ma 100 ma 5 i out = 250 ma 5 ma 100 ma
ta58m05, 06, 08, 09, 10, 12, 15f 2006-11-06 10 ta58m05f v in = 14 v i out = 0 ma 0 10 20 30 50 60 0 100 300 400 output current i out (ma ) quiescent current i b (ma) i b ? i out junction temperature tj (c) i peak ? tj dropout voltage v d (v) i peak ? v d peak output current i peak (a) peak output current i peak (a) 40 200 500 i b ? t j quiescent current i b (ma) junction temperature t j (c) 0 1.0 0.2 0.6 0.4 0.8 0 -50 150 50 100 output current i out (ma) v d ? i out dropout voltage v d (v) 0 1.0 0 300 500 0.6 0.4 100 0.8 0.2 200 400 junction temperature tj (c) v d ? tj dropout voltage v d (v) 0 0.5 -50 50 150 0.3 0.2 0.4 0.1 0 100 25 c 85 c 50 ma i out = 200 ma ta58m05f v in = 14 v ta58m05f tj = 25 c 0 20 30 10 0 0.8 1.2 0.4 0.2 ta58m05f tj = 25 c v in = 14 v -40 c 125 c 0 1.2 0.2 0.6 0.4 1.0 -50 50 150 0 100 0.8 1.0 0.6
ta58m05, 06, 08, 09, 10, 12, 15f 2006-11-06 11 package dimensions hsop-3-p-2.30d unit : mm weight: 0.36 g (typ.)
ta58m05, 06, 08, 09, 10, 12, 15f 2006-11-06 12 restrictions on product use 20070701-en ? the information contained herein is subject to change without notice. ? toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshib a products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconduct or devices,? or ?toshiba semiconductor reliability handbook? etc. ? the toshiba products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuri ng equipment, industrial robotics, domestic appliances, etc.).these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. unintended usage of toshiba products listed in his document shall be made at the customer?s own risk. ? the products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. ? the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba for any infringement s of patents or other rights of the third parties which may result from its use. no license is granted by implic ation or otherwise under any patents or other rights of toshiba or the third parties. ? please contact your sales representative for product- by-product details in this document regarding rohs compatibility. please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.

▲Up To Search▲

Price & Availability of TA58M12F

	To Download TA58M12F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .