new product uh10ft & uhb10ft vishay general semiconductor document number: 88963 revision: 13-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 ultrafast recovery rectifier features ? oxide planar chip junction ? ultrafast recovery times ? soft recovery characteristics ? low switching losses, high efficiency ? high forward surge capability ? meets msl level 1, per j-std-020, lf maximum peak of 245 c (for to-263ab package) ? solder dip 260 c, 40 s (for to-220ac package) ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in high frequency rectification and freewheeling application in switching mode converter and inverter for consumer. mechanical data case: to-220ac and to-263ab epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test polarity: as marked mounting torque: 10 in-lbs maximum primary characteristics i f(av) 10 a v rrm 300 v i fsm 180 a t rr 25 ns v f 0.83 v t j max. 175 c to-220ac 1 2 k uhb10ft nc k a heatsink pin 1 pin 2 case uh10ft to-263ab nc a maximum ratings (t a = 25 c unless otherwise noted) parameter symbol uh10ft uhb10ft unit maximum repetitive peak reverse voltage v rrm 300 v maximum average forward rectified current (fig. 1) i f(av) 10 a peak forward surge current 10 ms single half sine-wave superimposed on rated load i fsm 180 a operating junction and storage temperature range t j , t stg - 55 to + 175 c
new product uh10ft & uhb10ft vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88963 revision: 13-may-08 2 notes: (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit maximum instantaneous forward voltage (1) i f = 5.0 a i f = 5.0 a t j = 25 c t j = 125 c v f 0.96 0.77 - - v i f = 10 a i f = 10 a t j = 25 c t j = 125 c 1.0 0.83 1.2 0.90 maximum reverse current (2) v r = 300 v t j = 25 c t j = 125 c i r 0.5 25 5 150 a maximum reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 20 25 ns maximum reverse recovery time i f = 1.0 a, di/dt = 50 a/s, v r = 30 v, i rr = 0.1 i rm t rr 28 35 ns typical softness factor (tb/ta) i f = 10 a, di/dt = 200 a/s, v r = 200 v, t j = 125 c s0.36 - - typical reverse recovery current i rm 7.0 - ns typical stored charge q rr 160 - a typical forward recovery time i f = 10 a, di/dt = 80 a/s, v fr = 1.1 x v f max. t fr 150 - ns thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol uh10ft uhb10ft unit typical thermal resistance r jc 2.0 2.0 c/w ordering information (example) package preferred p/n unit weight (g) package code base quantity delivery mode to-220ac uh10ft-e3/4w 1.82 4w 50/tube tube to-263ab uhb10ft-e3/4w 1.32 4w 50/tube tube to-263ab uhb10ft-e3/8w 1.32 8w 800/reel tape and reel
new product uh10ft & uhb10ft vishay general semiconductor document number: 88963 revision: 13-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 ratings and characteristics curves (t a = 25 c unless otherwise noted) figure 1. maximum forward current derating curve figure 2. forward power loss characteristics figure 3. maximum non-repetitive peak forward surge current 0 3 6 9 12 15 0 25 50 75 100 125 150 175 t c - case temperat u re (c) a v erage for w ard c u rrent (a) resisti v e or ind u cti v e load 0 1 2 3 4 5 6 7 8 9 10 11 12 0246 8 10 12 a v erage for w ard c u rrent (a) a v erage po w er loss ( w ) d = 0.3 d = 0.5 d = 0. 8 d = 1.0 d = 0.2 d = 0.1 d = t p /t t p t 20 40 60 8 0 100 120 140 160 1 8 0 200 1 10 100 nu m b er of cycles peak for w ard s u rge c u rrent (a) t j = t j max. 10 ms single half sine- w a v e figure 4. typical instantaneous forward characteristics figure 5. typical reverse leakage charactersitics figure 6. typical junction capacitance 0.1 1 10 100 0.2 0.3 0.4 0.5 0.6 0.7 0. 8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) t j = 125 c t j = 175 c t j = 25 c 0.001 0.01 0.1 1 10 100 1000 10 20 30 40 50 60 70 8 0 90 100 percent of rated peak re v erse v oltage ( % ) instantaneo u s re v erse c u rrent ( a) t j = 125 c t j = 175 c t j = 25 c 1 10 100 1000 0.1 1 10 100 re v erse v oltage ( v ) j u nction capacitance (pf) t j = 25 c f = 1.0 mhz v sig = 50 m v p-p
new product uh10ft & uhb10ft vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88963 revision: 13-may-08 4 package outline dimensions in inches (millimeters) to-220ac case pi n 2 pi n 1 0.635 (16.13) 0.625 (15. 8 7) 0.415 (10.54) max. 0.154 (3.91) dia. 0.14 8 (3.74) dia. 0.113 (2. 8 7) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) pi n 12 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027 (0.6 8 ) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 1.14 8 (29.16) 1.11 8 (2 8 .40) 0.560 (14.22) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.350 ( 8 . 8 9) 0.330 ( 8 .3 8 ) 0.145 (3.6 8 ) 0.135 (3.43) 0.603 (15.32) 0.573 (14.55) 0.055 (1.39) 0.045 (1.14) 0.1 8 5 (4.70) 0.175 (4.44) to-263ab mo u nting pad layo u t 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.0 8 (2.032) mi n . 0.15 (3. 8 1) mi n . 0.33 ( 8 .3 8 ) mi n . 0.42 (10.66) mi n . n ca k k 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4. 8 3) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15. 8 5) 0.591 (15.00) 0.037 (0.940) 0.027 (0.6 8 6) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 ( 8 .13) 0.411 (10.45) 0.3 8 0 (9.65) 0.245 (6.22) mi n .
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
