1/5 www.rohm.com c 2010 rohm co., ltd. all rights reserved. 2010.02 - rev.a 4v drive pch mosfet RRH100P03 ? structure ? dimensions (unit : mm) silicon p-channel mosfet ? features 1) low on-resistance. 2) built-in g-s protection diode. 3) small surface mount package (sop8). ? application switching ? packaging specifications ? inner circuit package code taping basic ordering unit (pieces) RRH100P03 tb 2500 type ? absolute maximum ratings (ta = 25 ? c) ? 30 20 10 40 ? 1.6 ? 40 2.0 150 ? 55 to + 150 v dss v gss p d tch v v a w c i d i dp a i s i sp a a tstg c symbol limits unit parameter drain-source voltage range of storage temperature channel temperature power dissipation source current (body diode) drain current gate-source voltage pulsed continuous pulsed continuous ? 1 pw 10 s, duty cycle 1% ? 2 mounted on a ceramic board. ? 1 ? 1 ? 2 ? thermal resistance rth (ch-a) 62.5 c / w symbol limits unit parameter channel to ambient ? mounted on a ceramic board. ? each lead has same dimensions sop8 (1) source (2) source (3) source (4) gate (5) drain (6 )drain (7) drain (8) drain ? 1 esd protection diode ? 2 body diode ? 2 ? 1 (8) (7) (6) (5) (1) (2) (3) (4)
2/5 www.rohm.com c 2010 rohm co., ltd. all rights reserved. 2010.02 - rev.a data sheet RRH100P03 ? electrical characteristics (ta = 25 ? c) a pf m s v a v pf pf ns ns ns ns nc nc nc v gs = 0v f = 1mhz v ds =? 10v v gs =? 10v i d =? 5a, v dd ? 15v r l = 3.0 r g = 10 i d =? 10a, v gs =? 10v i d =? 5a, v gs =? 4.5v i d =? 5a, v gs =? 4.0v i d =? 10a, v ds =? 10v i d =? 1ma, v gs = 0v v gs = 20v, v ds = 0v v ds =? 30v, v gs = 0v v ds =? 10v, i d =? 1ma parameter test conditions unit min. typ. i gss i dss l y fs l c iss symbol c oss c rss t r t f q gd q gs q g v (br)dss v gs (th) r ds (on) ? ? ? ? ? ? ? ? ? t d (on) t d (off) ? pulsed static drain-source on-state resistance gate-drain charge gate-source charge total gate charge fall time turn-off delay time rise time turn-on delay time reverse transfer capacitance output capacitance input capacitance forward transfer admittance gate threshold voltage zero gate voltage drain current drain-source breakdown voltage gate-source leakage ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 30 9.0 12.5 14.0 3600 450 450 25 60 150 100 39 8.5 13.5 ? 1.0 13 max. ? ? ? ? ? ? ? ? ? ? ? 12.6 17.5 19.6 10 ? 1 ? 2.5 ? r l = 1.5 r g = 10 i d = ? 10a, v dd ? 15v v gs =? 5v ? body diode characteristics (source-drain) (ta = 25 ? c) parameter test conditions v unit ?? min. typ. ? 1.2 max. i s =? 10a, v gs = 0v v sd symbol ? pulsed forward voltage ?
3/5 www.rohm.com c 2010 rohm co., ltd. all rights reserved. 2010.02 - rev.a data sheet RRH100P03 ? electrical characteristics curves 0 2 4 6 8 10 12 14 16 18 20 0.0 0.2 0.4 0.6 0.8 1.0 ta=25 ? c pulsed v gs = -4.0v v gs = -3.2v v gs = -3.0v v gs = -2.8v 0.01 0.1 1 10 100 1.0 1.5 2.0 2.5 3.0 v ds =-10v pulsed ta=125 ? c ta=75 ? c ta=25 ? c ta= -25 ? c 1 10 100 0.1 1 10 100 ta=25 ? c pulsed v gs = -4.0v v gs = -4.5v v gs = -10v 0.01 0.1 1 10 100 0.0 0.2 0.4 0.6 0.8 1.0 1.2 v gs =0v pulsed ta=125 ? c ta=75 ? c ta=25 ? c ta= -25 ? c 0 2 4 6 8 10 12 14 16 18 20 0246810 ta=25 ? c pulsed v gs = -4.0v v gs = -3.4v v gs = -3.2v v gs = -3.0v v gs = -2.8v 1 10 100 0.1 1 10 100 v gs = -4.5v pulsed ta=125 ? c ta=75 ? c ta=25 ? c ta= -25 ? c 1 10 100 0.1 1 10 100 v gs = -10v pulsed ta=125 ? c ta=75 ? c ta=25 ? c ta= -25 ? c 0 1 10 100 0.1 1 10 100 v ds =-10v pulsed ta=125 ? c ta=75 ? c ta=25 ? c ta= -25 ? c 1 10 100 0.1 1 10 100 v gs = -4.0v pulsed ta=125 ? c ta=75 ? c ta=25 ? c ta= -25 ? c fig.1 typical output characteristic(i) fig.2 typical output characteristics( ? ) fig.3 typical transfer characteristics fig.4 static drain-source on-state resistance vs. drain current( ? ) fig.5 static drain-source on-state resistance vs. drain current( ? ) fig.6 static drain-source on-state resistance vs. drain current( ? ) fig.7 static drain-source on-state resistance vs. drain current( ? ) fig.9 reverse drain current vs. sourse-drain voltage fig.8 forward transfer admittance vs. drain current drain current : -i d [a] drain-source voltage : -v ds [v] drain-source voltage : -v ds [v] drain current : -i d [a] drain current : -i d [a] gate-source voltage : -v gs [v] drain-current : -i d [a] static drain-source on-state resistance : r ds(on) drain-current : -i d [a] static drain-source on-state resistance : r ds(on) drain-current : -i d [a] static drain-source on-state resistance : r ds(on) [ ] drain-current : -i d [a] static drain-source on-state resistance : r ds(on) [ ] ] ] ] ] = = ] [ ] v gs =-2.4v
4/5 www.rohm.com c 2010 rohm co., ltd. all rights reserved. 2010.02 - rev.a data sheet RRH100P03 0 50 100 051015 ta =2 5 ? c pulsed i d = -5.0a i d = -10.0a 0 2 4 6 8 10 0 10203040506070 ta=25 ? c v dd = -15v i d = -10a r g =10 ? pulsed 10 100 1000 10000 0.01 0.1 1 10 100 ciss coss crss ta=25 ? c f=1mhz v gs =0v 0.01 0.1 1 10 100 1000 0.1 1 10 100 pw = 10ms ta = 25 ? c single pulse mounted y on y ceramic board dc operation operation in this area is limited by r ds (on) pw=100us pw=1ms 0.001 0.01 0.1 1 10 0.001 0.01 0.1 1 10 100 1000 ta = 25 ? c single pulse : 1unit rth(ch-a)(t) = r(t)rth(ch-a) rth(ch-a) = 62.5 ?? c/w 1 10 100 1000 10000 0.01 0.1 1 10 100 tr tf td(on) td(off) ta=25 ? c v dd = -15v v gs = -10v r g =10 ?? pulsed fig.10 static drain-source on-state resistance vs. gate source voltage fig.12 dynamic input characteristics fig.13 typical capacitance vs. drain-source voltage fig.11 switching characteristics fig.14 maximum safe operating aera fig.15 normalized transient thermal resistance vs. pulse width static drain-source on-state resistance : r ds(on) [m ?? ] gate-source voltage : -v gs [v] switching time : t [ns] drain-current : -i d [a] gate-source voltage : -v gs [v] total gate charge : qg [nc] drain-source voltage : -v ds [v] capacitance : c [pf] drain-source voltage : -v ds [v] drain current : -i d (a) pulse width : pw(s) normarized transient thermal y resistance : r (t)
5/5 www.rohm.com c 2010 rohm co., ltd. all rights reserved. 2010.02 - rev.a data sheet RRH100P03 ? measurement circuit f ig.1-1 switching time measurement circu it v gs r g v ds d.u.t. i d r l v dd fig.1-2 switching waveforms 90% 90% 90% 10% 10 % 10% 50% 50% pulse width v gs v ds t on t off t r t d(on) t f t d(off) fig.2-1 gate charge measurement circuit v gs i g(const.) r g v ds d.u.t. i d r l v dd fig.2-2 gate charge waveform v g v gs charge q g q gs q gd
r1010 a www.rohm.com ? 2010 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes no copying or reproduction of this document, in part or in whole, is permitted without the consent of rohm co.,ltd. the content specied herein is subject to change for improvement without notice. the content specied herein is for the purpose of introducing rohm's products (hereinafter "products"). if you wish to use any such product, please be sure to refer to the specications, which can be obtained from rohm upon request. examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. great care was taken in ensuring the accuracy of the information specied in this document. however, should you incur any damage arising from any inaccuracy or misprint of such information, rohm shall bear no responsibility for such damage. the technical information specied herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm and other parties. rohm shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. the products specied in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, ofce-automation equipment, commu- nication devices, electronic appliances and amusement devices). the products specied in this document are not designed to be radiation tolerant. while rohm always makes efforts to enhance the quality and reliability of its products, a product may fail or malfunction for a variety of reasons. please be sure to implement in your equipment using the products safety measures to guard against the possibility of physical injury, re or any other damage caused in the event of the failure of any product, such as derating, redunda ncy, re control and fail-safe designs. rohm shall bear no responsibility whatsoever for your use of any product outside of the prescribed scope or not in accordance with the instruction manual. the products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospac e machinery, nuclear-reactor controller, fuel- controller or other safety device). rohm shall bear no responsibility in any way for use of any of the products for the above special purposes. if a product is intended to be used for any such special purpose, please contact a rohm sales representative before purchasing. if you intend to export or ship overseas any product or technology specied herein that may be controlled under the foreign exchange and the foreign trade law, you will be required to obtain a license or permit under the law.
|
