spec no: dsab9665 rev no: v.6 date: nov/12/2005 page: 1 of 6 approved: j. lu checked: allen liu drawn: y.w.wang description the hyper red source color devices are made with dh ingaalp on gaas substrate light emitting diode. the mega green source color devices are made with dh ingaalp on gaas substrate light emitting diode. the blue source color devices are made with ingan on sic light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti - electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. p/n: kpf - 3236surkmgkpbc hyper red mega green blue package dimension s attention observe precautions for handling electrostatic discharge sensitive device s 3.2mmx3.6mm full - color surface mount led lamp features low power consumption. 3.2mmx3.6mm smt led, 1.1mm thickness. one red, one green and one blue chips in one package. can produce any color in visible spectrum, including white light. package : 1000pcs / reel. rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3. specifications are subjected to change without notice.
spec no: dsab9665 rev no: v.6 date: nov/12/2005 page: 2 of 6 approved: j. lu checked: allen liu drawn: y.w.wang selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c symbol parameter device typ. max. test conditions units peak peak wavelength hyper red mega green blue 650 574 468 nm i f =20ma d dominant wavelength hyper red mega green blue 635 570 470 nm i f =20ma ? 1/2 spectral line half - width hyper red mega green blue 28 20 25 nm i f =20ma c capacitance hyper red mega green blue 35 15 65 pf v f =0v;f=1mhz v f forward voltage hyper red mega green blue 1.95 2.1 3.65 2.5 2.5 4.2 v i f =20ma i r reverse current hyper red mega green blue 10 10 10 ua v r = 5v part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 kpf - 3236surkmgkpbc hyper red (ingaaip) water clear 70 150 mega green (ingaaip) 18 60 blue (ingan) 18 60 120 absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. parameter hyper red mega green blue units power dissipation 170 105 102 mw dc forward current 30 30 30 ma peak forward current [1] 185 150 160 ma reverse voltage v operating/storage temperature - 40 c to +85 c 5
spec no: dsab9665 rev no: v.6 date: nov/12/2005 page: 3 of 6 approved: j. lu checked: allen liu drawn: y.w.wang kpf - 3236surkmgkpbc hyper red
spec no: dsab9665 rev no: v.6 date: nov/12/2005 page: 4 of 6 approved: j. lu checked: allen liu drawn: y.w.wang mega green
spec no: dsab9665 rev no: v.6 date: nov/12/2005 page: 5 of 6 approved: j. lu checked: allen liu drawn: y.w.wang blue
spec no: dsab9665 rev no: v.6 date: nov/12/2005 page: 6 of 6 approved: j. lu checked: allen liu drawn: y.w.wang remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity/ luminous flux: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters. tape specifications (units : mm) recommended soldering pattern (units : mm) kpf - 3236surkmgkpbc
|
