www.sunled.com part number: ZDG54W-1 2.0x1.25mm smd chip led lamp apr 11,2011 sdsa7319 v3 layout: maggie l. p. 1/4 features ideal for indication light on hand held products long life and robust package variety of lens types and color choices available package : 2000 pcs / reel moisture sensitiv ity level : level 3 rohs compliant attention observe precautions for handling electrostatic discharge sensitive devices package schematics notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0.004") unless otherwise noted. 3. specifications are subjec t to change without notice. dg (ingan) unit forward voltage (typ.) (i f =20ma) v f 3.3 v forward voltage (max.) (i f =20ma) v f 4.1 v reverse current (max.) (v r =5v) i r 50 ua wavelength of peak emission (typ.) (i f =20ma) p 515 nm wavelength of dominant emission (typ.) (i f =20ma) d 525 nm spectral line full width at half-maximum (typ.) (i f =20ma) 30 nm capacitance (typ.) (v f =0v, f=1mhz) c 45 pf operating characteristics (t a =25c) part number emitting color emitting material lens-color wavelength nm p viewing angle 2 1/2 min. typ. ZDG54W-1 green ingan water clear 280 447 515 120 luminous intensity (i f =20ma) mcd absolute maximum ratings (t a =25c) dg (ingan) unit reverse voltage v r 5 v forward current i f 25 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 150 ma power dissipation p d 102.5 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 450 v electrostatic discharge threshold (hbm)
www.sunled.com part number: ZDG54W-1 2.0x1.25mm smd chip led lamp apr 11,2011 sdsa7319 v3 layout: maggie l. p. 2/4 ? dg led is recommended for reflow soldering and soldering profile is shown below.
www.sunled.com part number: ZDG54W-1 2.0x1.25mm smd chip led lamp apr 11,2011 sdsa7319 v3 layout: maggie l. p. 3/4 ? the device has a single mounting surface. the device must be mounted according to the specifications. ? reel dimension ? recommended soldering pattern (units : mm; tolerance: 0.1) ? tape specification (units : mm) remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
www.sunled.com part number: ZDG54W-1 2.0x1.25mm smd chip led lamp apr 11,2011 sdsa7319 v3 layout: maggie l. p. 4/4 packing & label specifications zxxx54x-1
|