document number: 61004 revision 27-mar-03 www.vishay.com 28 CC4 vishay electro-films chip resistors vishay electro-films ?france +33.4.93.37.28.24 fax: +33.4.93.37.27.31 ?germany +49.9287.710 fax: +49 9287.70435 ?israel +9 72.3.557.0945 fax: +972.3.558.9121 ?italy + 39.2.300.11911 fax: +39.2.300.11999 ?japan +81.3.5464.6411 fax: +81.3.5464.6433 ?singapore +65.788.6668 fax: +65. 788.0988 ?sweden +46.8.594.70590 fax: +46.8.594.70581 ?uk +44 191 514 8237 fax: +44 1953 457 722 ?usa: (401) 738-9150 fax: (401) 738 -4389 tightest standard tolerance available 0.1% 0.05% 50 ? 150 ? 200k ? 400k ? thin film 0510 size resistor on alumina features chip size: 0.050 x 0.100 inches resistance range: 50 ? to 400k ? alumina substrate low stray capacitance: < 0.2pf resistor material: nichrome resistor passivation coat optional tolerances to 0.05% solder pad optional the CC4 series single-value resistor chips offer increased power in larger size, low shunt capacitance and solder pad option. the CC4s nichrome resistor material offers excellent stability. the CC4s are manufactured using vishay electro-films (efi) sophisticated thin film equipment and manufacturing technology. the CC4s are 100% electrically tested and visually inspected to mil-std-883. parameter noise, mil-std-202, method 308 - 20db typical moisture resistance, mil-std-202 method 106 - hermetic applications 0.2% maximum ? r/r stability, 1000 hours, + 125 c, 175mw 0.1% maximum ? r/r operating temperature range - 55 c to + 125 c thermal shock, mil-std-202, method 107, test condition f 0.25% maximum ? r/r high temperature exposure, + 150 c, 100 hours 0.1% maximum ? r/r dielectric voltage breakdown 400v insulation resistance 10 12 minimum operating voltage 100v maximum dc power rating at + 125 c (derated to zero at + 150 c) 175mw maximum 5 x rated power short-time overload, + 25 c, 5 seconds 0.25% maximum ? r/r standard electrical specifications applications vishay efi CC4 chip resistors provide excellent high-frequency response and are ideally suited for prototyping. typical application areas are: amplifiers couplers oscillators filters attenuators recommended for hermetic environment where die is not exposed to moisture product may not be to scale temperature coefficient of resistance, values and tolerances 25ppm/ c 50ppm/ c 100ppm/ c
www.vishay.com 29 CC4 vishay electro-films document number: 61004 revision 27-mar-03 chip resistors vishay electro-films ?france +33.4.93.37.28.24 fax: +33.4.93.37.27.31 ?germany +49.9287.710 fax: +49 9287.70435 ?israel +9 72.3.557.0945 fax: +972.3.558.9121 ?italy + 39.2.300.11911 fax: +39.2.300.11999 ?japan +81.3.5464.6411 fax: +81.3.5464.6433 ?singapore +65.788.6668 fax: +65. 788.0988 ?sweden +46.8.594.70590 fax: +46.8.594.70581 ?uk +44 191 514 8237 fax: +44 1953 457 722 ?usa: (401) 738-9150 fax: (401) 738 -4389 parameter chip size 0.050 x 0.100 0.003 (1.27 x 2.54 0.076mm) chip thickness 0.010 0.002 (0.254 0.05mm) chip substrate material 99.6% alumina, 2-4 microinch finish resistor material nichrome bonding pad size 0.015 x 0.045 (0.381 x 1.143mm) minimum number of pads 2 pad material 25k? minimum gold standard backing none mechanical specifications in inches dimensions in inches options: terminations: aluminum, nickel solder (62/32) gold back for solder die attach contact applications engineer thin film 0510 size resistor on alumina 0.050 0.065 0.045 0.015 0.100 example: 100% visualled, 80 ? , 10%, 50ppm/ c tcr, gold terminations, resistor coated (thermal set plastic) w CC4 8000 b k d gc inspection product resistance multiplier tolerance tcr terminations /packaging family value code code w = 100% visually inspected use first 4 b = 0.01 a = 0.05%* a = 10ppm/ c g = gold parts in matrix tray per significant digits a = 0.1 b = 0.1%* b = 25ppm/ c s = solder mil-std-883 of resistance 0 = 1 c = 0.25%* d = 50ppm/ c gc = gold/ x = sample, commercial 1 = 10 d = 0.5% e = 100ppm/ c coated visually inspected parts loaded 2 = 100 f = 1.0% sc = solder/ in matrix trays (4% aql) g = 2.0% coated j = 5.0% k = 10% *coating standard ordering information schematic
|
