document number: 61001 revision 07-aug-01 www.vishay.com 22 CC1 vishay electro-films chip resistors vishay electro-films ?france +33.4.93.37.28.24 fax: +33.4.93.37.27.31 ?germany +49.9287.710 fax: +49 9287.70435 ?israel +9 72.3.557.0945 fax: +972.3.558.9121 ?italy + 39.2.300.11911 fax: +39.2.300.11999 ?japan +81.42.729.0661 fax: +81.42.729.3400 ?singapore +65.788.6668 fax: +65. 788.0988 ?sweden +46.8.594.70590 fax: +46.8.594.70581 ?uk +44 191 514 8237 fax: +44 1953 457 722 ?usa: (401) 738-9150 fax: (401) 738 -4389 tightest standard tolerance available 0.5% 0.1% 10 ? 20 ? 200 ? 12k ? 24k ? *note: only 25 ? to 1k ? are standard strip line designs for microwave applications thin film 0402 size resistor on alumina features small single chip size: 0.020 x 0.040 inches resistance range: 10 ? to 24k ? alumina substrate low stray capacitance: < 0.2pf resistor material: nichrome resistor passivation coat optional solder pads optional the CC1 series single-value resistor chips offer a small size, low shunt capacitance and solder pad option. the CC1s nichrome resistor material offers excellent stability. the CC1s are manufactured using vishay electro-films (efi) sophisticated thin film equipment and manufacturing technol- ogy. the CC1s are 100% electrically tested and visually inspected to mil-std-883. parameter noise, mil-std-202, method 308 - 20db typical moisture resistance, mil-std-202 method 106 - hermetic applications 0.2% maximum ? r/r stability, 1000 hours, + 125 c, 40mw 0.1% maximum ? r/r operating temperature range - 55 c to + 125 c thermal shock, mil-std-202, method 107, test condition f 0.25% maximum ? r/r high temperature exposure, + 150 c, 100 hours 0.1% maximum ? r/r dielectric voltage breakdown 400v insulation resistance 10 12 minimum operating voltage 100v maximum dc power rating at + 125 c (derated to zero at + 150 c) 40mw maximum 5 x rated power short-time overload, + 25 c, 5 seconds 0.25% maximum ? r/r standard electrical specifications applications vishay efi CC1 chip resistors provide excellent high-frequency response and are ideally suited for prototyping. typical application areas are: amplifiers couplers oscillators filters attenuators recommended for hermetic environments where die is not exposed to moisture. product may not be to scale temperature coefficient of resistance, values* and tolerances 25ppm/ c 50ppm/ c 100ppm/ c
www.vishay.com 23 CC1 vishay electro-films document number: 61001 revision 07-aug-01 chip resistors vishay electro-films ?france +33.4.93.37.28.24 fax: +33.4.93.37.27.31 ?germany +49.9287.710 fax: +49 9287.70435 ?israel +9 72.3.557.0945 fax: +972.3.558.9121 ?italy + 39.2.300.11911 fax: +39.2.300.11999 ?japan +81.42.729.0661 fax: +81.42.729.3400 ?singapore +65.788.6668 fax: +65. 788.0988 ?sweden +46.8.594.70590 fax: +46.8.594.70581 ?uk +44 191 514 8237 fax: +44 1953 457 722 ?usa: (401) 738-9150 fax: (401) 738 -4389 parameter chip size 0.020 x 0.040 0.003 (0.5 x 1.0 0.08mm) chip thickness 0.010 0.002 (0.254 0.03mm) chip substrate material 99.6% alumina, 2-4 inch finish resistor material nichrome bonding pad size 0.010 x 0.012 (0.175 x 0.30mm) number of pads 2 pad material 25k? minimum gold standard backing none mechanical specifications in inches dimensions in inches options: terminations: aluminum, nickel solder (62/32) gold back for solder die attach contact applications engineer thin film 0402 size resistor on alumina typical range 16 ? - 29 ? 0.010 0.020 0.012 0.040 example: 100% visual, 50 ? , 10%, 100ppm/ c tcr, gold terminations, resistor coated (thermal set plastic) w CC1 5000 b k e gc inspection product resistance multiplier tolerance tcr terminations /packaging family value code code w = 100% visually inspected use first 4 b = 0.01 b = 0.1%* b = 25ppm/ c g = gold parts in matrix tray per significant digits a = 0.1 c = 0.25%* d = 50ppm/ c s = solder mil-std-883 of resistance 0 = 1 d = 0.5% e = 100ppm/ c gc = gold/ x = sample, commercial 1 = 10 f = 1.0% coated visually inspected parts loaded 2 = 100 g = 2.0% sc = solder/ in matrix trays (4% aql) j = 5.0% coated k = 10% * coating standard ordering information note: factory will convert order number into final part number typical range 30 ? - 24k ? 0.010 0.020 0.012 0.040 0.040 typical range 10 ? - 15 ? 0.020 0.012 0.010 schematic
|