page 88 sw3 j8 (rs232) 3.3v 5v sw2 dip switch j11 (lcd interface) for prototyping j4 j10 for touch panel reset power switch sw1 j9 power input vr2 pos. lcd vr1 neg. lcd voltage voltage easy evaluation and demonstration - on board nvram to store demo content - download content via rs-232 serial port (j8) - create contents by general html authoring tools, compile the content to small size html by uhtml compiler easy interface with lcd modules - 40-pin connector (j11) for hantronix qvga interface card, hdm3224-1, hdm3224-2, hdm3224-5, hdm3224-6, hdm3224-7, hdm2432l-t-xxtf - positive and negative lcd contrast voltage - lcd logic power selection : 5v or 3.3v - 4-pin touch panel connector (j10) : configurable pinout - prototyping area for new lcd connections - ac adaptor for power source - power switch and indicating led physical data size....................................................166w x 94h x 16 t mm weight...............................................................................82g includings - controller board - 40 connector flat ribbon cable, 6? long - 9 pin serial interface cable, 6? long - ac adaptor - amulet uhtml compiler and documentation cd 30 days evaluation copy (version 2.1.9) - operation guide options - hantronix qvga interface card with proper connector and b/l inverter if required - full version amulet uhtml compiler (HCK-A-2) pin connections pin no. symbol level function lcd connector (j11) 1db0h/l data bus 3db1h/l 5db2h/l 7db3h/l 9db4h/l 11 db5 h/l 13 db6 h/l 15 db7 h/l 2,8,14,20,26 vss 0 v signal ground 4,6,10,12,16,17, 18,19,21,22,23, 24,25,27,28,29, 31,38 nc no connection 30 -v l negative lcd bias voltage 32 v dd 5 or 3.3v power supply for logic 33 cl2 h/h ? l data shift 34 +12v power supply 35 dispoff h/l h=on, l=off 36 +v l positive lcd bias voltage 37 cl1 h/h ? l data latch signal 39 flm h/l frame pulse 40 m h/l liquid crystal ac drive signal serial connector (j8) 1,9 nc no connection 2 dout data from control board 3 din data to control board 5gnd0 vsignal ground 4,6 connected 7,8 connected touch panel connector (j10) 1 y- connection configured with jumpers, j4/j5 and j10 jumpers 3y+ 5x- 7x+ mono graphic modules without controller HCK-A-1 graphic evaluation kit features
|
