 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Confidential Document DATA IMAGE CORPORATION LCD Module Specification ITEM NO.: TG136510GFSYB-01 Table of Contents 1 COVER & CONTENTS 2. RECORD OF REVISION 3. GENERAL SPECIFICATIONS 4. ABSOLUTE MAXIMUM RATINGS 5. ELECTRICAL CHARACTERISTICS 6. ELECTRO-OPTICAL CHARACTERISTICS 7. PIN CONNECTIONS 8. POWER SUPPLY 9. BLOCK DIAGRAM 10. QUALITY ASSURANCE 11. LOT NUMBERING SYSTEM 12. LCM NUMBERING SYSTEM 13 PRECAUTIONS IN USE LCM 14 IC CONTENTS ATTACHMENT : Reference documents from EPSON 15 OUTLINE DRAWING 16 PACKAGE INFORMATION R&D Dept. Q.C. Dept. Eng. Dept. 1 2 3 4 5 5 8 8 9 11 15 15 16 17 18 19 Prod. Dept. Version: B Issued Date: 2003/1/21 Sheet Code: Total Pages: 19 Page:1/19 Confidential Document 2. RECORD OF REVISION Rev Date JAN/21/02 B JAN/21/02 Item 12 5,6,9, 10 Page 15 5,6,9, 13-14 Comment New model numbering system update from old P/N# TG13652SL3YH 1.Change Block Diagram from SED1565TOB to SED1565. 2.Change 10.2.3 Inspection Parameters. 3.Add:10.3 Sampling Condition. 4.Change LCD Voltage and Resistor R10 valve from 82K to 91K to eliminate vertical line problem. Page:2/19 Confidential Document 3. GENERAL SPECIFICATIONS Display Format : Dot Size : Dot Pitch View Area : General Dimensions : Weight : LCD Type : Polarizer mode : 132 (W) x 0.35 (W) x 0.39 (W) x 56 (W) x 62.5 (W) x 30 g max. V STN Gray Reflective Transmissive View Angle : Backlight : Backlight Color : V 6 O'clock V LED V Yellow green White Controller / Driver : Temperature Range : SED1565 Normal V Wide Temperature Operating 0 to 50C Operating -20to 70C Storage -20 to 70C Storage -30 to 80C STN Yellow V Transflective Negative 12 O'clock EL Amber Others Others CCFL Blue Green FSTN 64 (H) 0.49 (H) 0.53 (H) 41 (H) 51.6 (H) x Dots mm mm mm 6.5 (T) mm Max. Page:3/19 Confidential Document 4. ABSOLUTE MAXIMUM RATINGS 4.1 ELECTRICAL ABSOLUTE MAXIMUM RATINGS VSS= 0V, Item Supply Voltage (Logic) Supply Voltage (LCD Driver) Input Voltage Operating Temperature Storage Temperature Symbol VDD-VSS VDD-V5 VI TOP TSTG Min. 0 0 VSS-0.3 -20 -30 Max. 8 16.5 VDD+0.3 70 80 Unit V V V Ta = 25C C C 4.2 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS Item Ambient Temp Humidity Vibration Shock --Operating (Min.) -20 Note (2) 4.9M/S 2 2 Storage (Min.) -30 Note(2) --19.6M/S 490M/S 2 Max.) 70 (Max.) 80 Comment Note (1) Without Condensation XYZ Direction XYZ Direction 29.4M/S 2 Note(1) Ta = 0C : 50Hr Max. Note(2) Ta 40C : 90% RH Max. Ta 40C : Absolute humidity must be lower than the humidity of 90% RH at 40C. Page:4/19 Confidential Document 5. ELECTRICAL CHARACTERISTICS Item Supply Voltage (Logic) Supply Voltage (LCD) Symbol VDD-VSS -25C VDD-V5 25C 70C Input Voltage Logic Supply Current VIH VIL IDD -VDD-VSS=3V Condition Min. 2.7 8.1 8.0 7.7 VSS+2.0 VSS -Typ. 3.0 8.6 8.4 8.1 --0.5 Max. 5.0 9.1 8.8 8.5 VDD VSS+0.8 -V mA V Unit V 6. ELECTRO-OPTICAL CHARACTERISTICS ITEM Symbol Condition -10C Rise Time Tr 0C 25C -10C Fall Time Tf 0C 25C Contrast View Angle Frame Frequency CR 1~2 1, 2 Ff 25C 25C 25C 4 40 40 32 --Min. Typ. 1000 -200 1000 -200 6 --64 Max. 1500 -250 1500 -250 ----Degree Hz Note (3) Note (2) ms ms Note (1) Unit Ref. Note (1) & (2) : See next page Note (3) : Contrast ratio is defined under the following condition: CR= Brightness of non-selected condition Brightness of selected condition ( a ). ( b ). ( c ). ( d ). Temperature ---------- 25C Frame frequency ---- 64Hz Viewing angle -------- = 0, = 0 Operating voltage --- 8.4V Page:5/19 Confidential Document Note (1) Response time is measured as the shortest period of time possible between the change in state of an LCD segment as demonstrated below: +Vop 1/f F 0 -Vop 90% 100% 10% tr Condition: ( a ) . Temperature ---------------25C ( b ) . Frame frequency --------- 64Hz ( c ) . View Angle ----------------- = 0, = 0 ( d ) . Operating voltage -------- 8.4V Note (2) Definition of View Angle Top - Bottom direction Top 1 2 Right -- Left direction 2 1 tf Bottom Left Right Page:6/19 Confidential Document 6.1 LED ELECTRO-OPTICAL CHARACTERISTIC Item Forward Voltage Luminous Intensity Peak Emission Spectrum Radiation Reverse Current Symbol VF IV P IR Condition IF = 100mA Yellow Green IF = 100mA Yellow Green IF = 100mA Yellow Green IF = 100mA Yellow Green VR = 8V Yellow Green Min. 2.12 ---- Typ. 2.14 35 570 35 -- Max. 2.21 ---1 Ta = 25C Unit V cd/m nm nm mA 2 Note : Measured at the bared LED backlight unit. 6.1.2 LED MAXIMUM OPERATING RANGE Item Power Dissipation Forward Current Reverse Voltage Operating Temperature Storage Temperature Symbol PAD IAF VR TOP TSTG Yellow Green 6.6 300 8 -20 to+70 -35 to+85 Unit W mA V C C 6.1.3 EDGE LIGHT LED BLOCK DIAGRAM A 1 X 10=10 (LED NUMBERS) K Page: 7 /19 Confidential Document 7. PIN CONNECTIONS No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Symbol VSS VDD VR V5 /CS1 A0 /WR /RD DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 LED A LED K Function Ground, 0V Logic power supply LCD contrast control input Voltage output for LCD IC chip select Data/Command selection Write data signal input Read data signal input Data Bus Line LED Anode(+) LED Cathode(-) 8. POWER SUPPLY +3.3V VDD 0V VR=1M ohm VR V5 VSS (LCD contrast) LED Backlight LED A(2.1V) LED K (GND) Page: 8 /19 Confidential Document 9.BLOCK DIAGRAM Coms LCD 132X64 C31 C0 C63 C32 S0 S131 SED1565 Control Data Page: 9 /19 Confidential Document 9.1 LCD ICON Position COM &SEG NC S0 C31 CS C0 SEG S131 NC COM C32 CS C63 Page: 10 /19 Confidential Document 10. QUALITY ASSURANCE 10.1 Test Condition 10.1.1 Temperature and Humidity(Ambient Temperature) Temperature : 20 5C Humidity : 65 5% 10.1.2 Operation Unless specified otherwise, test will be conducted with LCM in operation. 10.1.3 Container Unless specified otherwise, vibration test will be conducted on module only. 10.1.4 Test Frequency Single cycle. 10.1.5 Test Method No. 1 2 3 4 5 6 7 Parameter High Temperature Operating Low Temperature Operating High Temperature Storage Low Temperature Storage Vibration Test (Non-operation state) Damp Proof Test (Non-operation state) Shock Test (Non-operation state) Conditions 70 2 C -20 2 C 80 2 C -30 2 C Total fixed amplitude : 1.5mm Vibration Frequency : 10 ~ 55Hz One cycle 60 seconds to 3 directions of X.Y.Z. for each 15 minutes 40C 2C, 90~95%RH, 96h Regulations Note 3 Note 3 Note 3 Note 3 Note 3 Note 1,2 Note 3 To be measured after dropping from 60cm high once concrete surface in packing state Note 1: Returned under normal temperature and humidity for 4 hours. Note 2: No dew condensation to be observed. Note 3: No change on display and in operation under the test condition Page: 11 /19 Confidential Document 10.2 Inspection condition 10.2.1 Inspection conditions The LCD shall be inspected under 40W white fluorescent light. 45 10.2.2 Definition of applicable Zones B LCD A BEZEL PCB A : Display Area B : Non-Display Area Page: 12 /19 Confidential Document 10.2.3 Inspection Parameters No. Parameter Black or White spots Acceptable Class AQL number Of Level Defects A B Dimension D < 0.15 4 4 0.15 D< 0.2 Minor 2.5 2 2 0.2 D 0.25 0 1 D 0.3 D = (Long + Short) / 2 * : Disregard Zone Criteria 1 2 Scratch, Substances Class Acceptable Of number X (mm) Y(mm) Defects A B 0.04 W 4 4 3.0 L 0.06 W Minor 2 3 2.0 L 0.08 W 0 1 0.1 < W X : Length Y : Width : Disregard Total defects should not exceed 4/module Zone AQL Level 2.5 3 Air Bubbles (between glass & polarizer) Zone Dimension D 0.15 0.15 < D 0.25 Acceptable number A B 2 Class of Defects Minor AQL Level 2.5 0 1 0.25 < D : Disregard Total defects shall not excess 3/module. 4 Uniformity of Pixel (1) Pixel shape (with Dent) 0.152 Page: 13 /19 Confidential Document (2) Pixel shape ( with Projection) Should not be connected to next pixel 0.152 (3) Pin hole X 4 Uniformity of Pixel Y ( X + Y )/2 0.02mm (Less than 0.1 mm is no counted) (4) Deformation X ( X + Y ) / 2 0.3mm Y Total acceptable number : 1/pixel, 5/cell Definition It is a defect that is likely to result in failure or to reduce materially the usability of the product for the intended function. It is a defect that is likely to assembly size and not result in functioning problem. It is a defect that will not result in functioning problem with deviation classified. Major Class of defects Minor AQL 0.65% AQL 1.00% AQL 2.5% 10.3 Sampling Condition Unless otherwise agree in written, the sampling inspection shall be applied to the incoming inspection of customer. Lot size: Quantity of shipment lot per model. Sampling type: normal inspection, single sampling Inspection level: Level II Sampling table: MIL-STD-105E Page: 14 /19 Confidential Document 11. LOT NUMBERING SYSTEM 9 7 4 2 Production week number Production year 12. LCM NUMBERING SYSTEM TG 136510 G F S Y B - 01 Special code:01 View direction & Temp. Range A-Bottom view 6H & Normal temp. B-Bottom view 6H & Wide temp. C-Top View & Normal temp. D-Top View & Wide temp. Backlight Color B -Blue W -White Y - Yellow Backlight S -edge light LED B/L E -EL C-CCFL MODE M - transmissive F - transflective R - Reflective N - Negative LCD type P - FSTN Paper white F - FSTN S - STN Yellow G -STN Gray Series code 136510- Dot number =132 Dots X 65 Dot,, 1 LCD Type, 0 PCB Type Model type CM - Character Module GM - Graphic Module TG -Single TAB Graphic Module TX-Custom Single TAB Graphic Module Page: 15 /19 Confidential Document 13. PRECAUTION FOR USING LCM 1. LIQUID CRYSTAL DISPLAY (LCD) LCD is made up of glass, organic sealant, organic fluid, and polymer based polarizers. The following precautions should be taken when handing, (1). Keep the temperature within range of use and storage. Excessive temperature and humidity could cause polarization degredation, polarizer peel off or bubble. (2). Do not contact the exposed polarizers with anything harder than an HB pencil lead. To clean dust off the display surface, wipe gently with cotton, chamois or other soft material soaked in petroleum benzin. (3). Wipe off saliva or water drops immediately. Contact with water over a long period of time may cause polarizer deformation or color fading, while an active LCD with water condensation on its surface will cause corrosion of ITO electrodes. (4). Glass can be easily chipped or cracked from rough handling, especially at corners and edges. (5). Do not drive LCD with DC voltage. 2. Liquid Crystal Display Modules 2.1 Mechanical Considerations LCM are assembled and adjusted with a high degree of precision. Avoid excessive shocks and do not make any alterations or modifications. The following should be noted. (1). Do not tamper in any way with the tabs on the metal frame. (2). Do not modify the PCB by drilling extra holes, changing its outline, moving its components or modifying its pattern. (3). Do not touch the elastomer connector, especially insert an backlight panel (for example, EL). (4). When mounting a LCM make sure that the PCB is not under any stress such as bending or twisting . Elastomer contacts are very delicate and missing pixels could result from slight dislocation of any of the elements. (5). Avoid pressing on the metal bezel, otherwise the elastomer connector could be deformed and lose contact, resulting in missing pixels. 2.2. Static Electricity LCM contains CMOS LSI's and the same precaution for such devices should apply, namely (1). The operator should be grounded whenever he/she comes into contact with the module. Never touch any of the conductive parts such as the LSI pads, the copper leads on the PCB and the interface terminals with any parts of the human body. (2). The modules should be kept in antistatic bags or other containers resistant to static for storage. (3). Only properly grounded soldering irons should be used. (4). If an electric screwdriver is used, it should be well grounded and shielded from commutator sparks. (5) The normal static prevention measures should be observed for work clothes and working benches; for the latter conductive (rubber) mat is recommended. (6). Since dry air is inductive to static, a relative humidity of 50-60% is recommended. 2.3 Soldering (1). Solder only to the I/O terminals. (2). Use only soldering irons with proper grounding and no leakage. (3). Soldering temperature : 280C 10C (4). Soldering time: 3 to 4 sec. (5). Use eutectic solder with resin flux fill. (6). If flux is used, the LCD surface should be covered to avoid flux spatters. Flux residue should be removed after wards. 2.4 Operation (1). The viewing angle can be adjusted by varying the LCD driving voltage V0. (2). Driving voltage should be kept within specified range; excess voltage shortens display life. (3). Response time increases with decrease in temperature. (4). Display may turn black or dark blue at temperatures above its operational range; this is (however not pressing on the viewing area) may cause the segments to appear "fractured". (5). Mechanical disturbance during operation (such as pressing on the viewing area) may cause the segments to appear "fractured". 2.5 Storage If any fluid leaks out of a damaged glass cell, wash off any human part that comes into contact with soap and water. Never swallow the fluid. The toxicity is extremely low but caution should be exercised at all the time. 2.6 Limited Warranty Unless otherwise agreed between DATA IMAGE and customer, DATA IMAGE will replace or repair any of its LCD and LCM which is found to be defective electrically and visually when inspected in accordance with DATA IMAGE acceptance standards, for a period on one year from date of shipment. Confirmation of such date shall be based on freight documents. The warranty liability of DATA IMAGE is limited to repair and/or replacement on the terms set forth above. DATA IMAGE will not responsible for any subsequent or consequential events. Page: 16 /19 Confidential Document 14. IC CONTENTS ATTACHMENT: Reference Documents From EPSON SED1565 LCD DRIVER With contents SED1565 Series 1. 2. 3. 4. 5. 6. 7. BLOCK DIAGRAM DESCRIPTION OF FUNCTIONS THE BUSY FLAG & DISPLAY DATA RAM THE POWER SUPPLY CIRCUITS COMMAND DESCRIPTION TIMING CHARACTERISTICS A SAMPLE TCP PIN ASSIGNMENT (REV1.2) 8-3 page 8-24~ 8-25 8-26~8-30 8-32 8-48~8-58 8-69~8-74 8-80 Page: 17 /19 Confidential Document 15. OUTLINE DRAWING PIN FUNCTION 1. VSS 10. DB1 2. VDD 11. DB2 3. VR 12. DB3 4. V5 13. DB4 5. /CS1 14. DB5 6. A0 15. DB6 7. /WR 16. DB7 8. /RD 17. LED A (3.3V) 9. DB0 18. LED K DOTS Detail Scale 10/1 Page: 18 /19 Confidential Document 16. PACKAGE INFORMATION Anti-static bag LCM Carton Page: 19 /19 |
Price & Availability of TG136510GFSYB01
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |