 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Preliminary Data Sheet Specifications in this document are tentative and subject to change. PS9505,PS9505L1,PS9505L2,PS9505L3 -NEPOC Series- 2.5 A OUTPUT CURRENT, HIGH CMR, IGBT GATE DRIVE, 8-PIN DIP PHOTOCOUPLER R08DS0015EJ0001 Rev.0.01 May 12, 2010 DESCRIPTION The PS9505, PS9505L1, PS9505L2 and PS9505L3 are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode, a signal processing circuit and a power output transistor on the output side on one chip. The PS9505 Series is designed specifically for high common mode transient immunity (CMR), high output current and high switching speed. The PS9505 Series is suitable for driving IGBTs and MOS FETs. The PS9505 Series is in a plastic DIP (Dual In-line Package). The PS9505L1 is lead bending type for long creepage distance. The PS9505L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. The PS9505L3 is lead bending type (Gull-wing) for surface mounting. FEATURES * Long creepage distance (8 mm MIN.: PS9505L1, PS9505L2) * Large peak output current (2.5 A MAX., 2.0 A MIN.) * High speed switching (tPLH, tPHL = 0.25 s MAX.) * UVLO (Under Voltage Lock Out) protection with hysteresis * High common mode transient immunity (CMH, CML = 25 kV/s MIN.) : PS9505L3-E3: 1 000 pcs/reel 1 2 3 4 SHIELD PIN CONNECTION (Top View) 8 7 6 5 * Embossed tape product: PS9505L2-E3: 1 000 pcs/reel 1. NC 2. Anode 3. Cathode 4. NC 5. VEE 6. VO 7. VO 8. VCC APPLICATIONS * IGBT, Power MOS FET Gate Driver * Industrial inverter * IH (Induction Heating) R08DS0015EJ0001 Rev.0.01 May 12, 2010 Page 1 of 15 Preliminary document Specifications in this document are tentative and subject to change. PS9505,PS9505L1,PS9505L2,PS9505L3 PACKAGE DIMENSIONS (UNIT: mm) DIP Type Chapter Title PS9505 9.25 +0.5 -0.25 1.01-0.2 +0.4 7.62 6.5-0.1 +0.5 2.8 MIN. 4.150.3 3.50.2 0.50.15 0.25 M 2.54 0 to 15 0.840.15 Lead Bending Type (Gull-wing) For Surface Mount PS9505L3 5 9.25-0.25 8 +0.5 1 4 9.650.4 3.50.2 0.50.15 0.25 M 2.54 0.740.25 R08DS0015EJ0001 Rev.0.01 May 12, 2010 0.6350.15 1.01 +0.4 -0.2 6.5-0.1 +0.5 Page 2 of 15 Preliminary document Specifications in this document are tentative and subject to change. PS9505,PS9505L1,PS9505L2,PS9505L3 Lead Bending Type For Long Creepage Distance Chapter Title PS9505L1 9.25-0.25 +0.5 10.16 1.01 +0.4 -0.2 6.5-0.1 +0.5 2.8 MIN. 3.870.4 3.50.2 0.50.15 0.25 M 2.54 0 to 15 0.840.15 Lead Bending Type (Gull-wing) For Long Creepage Distance (Surface Mount) PS9505L2 9.25 8 +0.5 -0.25 5 1 1.01 +0.4 -0.2 4 11.80.4 6.5-0.1 +0.5 3.50.2 0.50.15 0.25 M 2.54 0.90.25 R08DS0015EJ0001 Rev.0.01 May 12, 2010 0.250.2 Page 3 of 15 Preliminary document Specifications in this document are tentative and subject to change. PS9505,PS9505L1,PS9505L2,PS9505L3 PHOTOCOUPLER CONSTRUCTION Parameter Air Distance (MIN.) Outer Creepage Distance (MIN.) Isolation Distance (MIN.) PS9505, PS9505L3 7 mm 7 mm 0.4 mm PS9505L1, PS9505L2 8 mm 8 mm 0.4 mm Chapter Title FUNCTIONAL DIAGRAM 8 (Tr. 1) 2 7 (Tr. 2) 3 6 5 SHIELD Input H L LED ON OFF Tr. 1 ON OFF Tr. 2 OFF ON Output H L MARKING EXAMPLE No. 1 pin Mark 9505 NT031 Type Number Assembly Lot N T 0 31 Week Assembled Year Assembled (Last 1 Digit) In-house Code Rank Code R08DS0015EJ0001 Rev.0.01 May 12, 2010 Page 4 of 15 Preliminary document Specifications in this document are tentative and subject to change. PS9505,PS9505L1,PS9505L2,PS9505L3 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Diode Forward Current Peak Transient Forward Current (Pulse Width < 1 s) Reverse Voltage Detector Chapter Title Symbol IF IF (TRAN) Ratings 25 1.0 Unit mA A VR IOH (PEAK) 5 2.5 V A High Level Peak Output *1 Current Low Level Peak Output Current *1 IOL (PEAK) 2.5 A Supply Voltage Output Voltage Power Dissipation Isolation Voltage *3 *4 *2 (VCC - VEE) VO PC BV PT f TA Tstg 0 to 35 0 to VCC 250 5 000 300 50 -40 to +110 -55 to +125 V V mW Vr.m.s. mW kHz C C Total Power Dissipation Operating Frequency *5 Operating Ambient Temperature Storage Temperature *1 Maximum pulse width = 10 s, Maximum duty cycle = 0.2% *2 Reduced to 4.8 mW/C at TA = 70C or more. *3 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-4 shorted together, 5-8 shorted together. *4 Reduced to 5.4 mW/C at TA = 70C or more. *5 IOH (PEAK) 2.0 A ( 0.3 s), IOL (PEAK) 2.0 A ( 0.3 s) RECOMMENDED OPERATING CONDITIONS Parameter Supply Voltage Forward Current (ON) Forward Voltage (OFF) Operating Ambient Temperature Symbol (VCC - VEE) IF (ON) VF (OFF) TA MIN. 15 7 -2 -40 10 TYP. MAX. 30 16 0.8 110 Unit V mA V C R08DS0015EJ0001 Rev.0.01 May 12, 2010 Page 5 of 15 Preliminary document Specifications in this document are tentative and subject to change. PS9505,PS9505L1,PS9505L2,PS9505L3 Chapter Title ELECTRICAL CHARACTERISTICS (TA = -40 to +110C, VCC = 15 to 30 V, IF (ON) = 7 to 16 mA, VF (OFF) = -2 to 0.8 V, VEE = GND, unless otherwise specified) Parameter Diode Forward Voltage Reverse Current Input Capacitance Detector High Level Output Current Symbol VF IR CIN IOH Conditions IF = 10 mA, TA = 25C VR = 3 V, TA = 25C f = 1 MHz, VF = 0 V, TA = 25C VO = (VCC - 4 V) *2 *3 *2 MIN. 1.2 TYP. *1 MAX. 1.8 10 Unit V 1.56 A pF A 30 0.5 2.0 0.5 2.0 VCC - 3.0 VCC - 1.5 0.1 2.0 2.0 10.8 9.5 0.4 12.3 11.0 1.3 2.0 5.0 0.5 3.0 3.0 13.4 12.5 2.0 2.0 VO = (VCC - 15 V) Low Level Output Current IOL VO = (VEE + 2.5 V) VO = (VEE + 15 V) A *3 High Level Output Voltage Low Level Output Voltage High Level Supply Current Low Level Supply Current UVLO Threshold VOH VOL ICCH ICCL VUVLO+ VUVLO- IO = -100 mA IO = 100 mA *4 V V mA mA V VO = open, IF = 10 mA VO = open, VF = 0 to +0.8 V VO > 5 V, IF = 10 mA UVLO Hysteresis Coupled Threshold Input Current (L H) Threshold Input Voltage (H L) UVLOHYS VO > 5 V, IF = 10 mA IFLH IO = 0 mA, VO > 5 V V mA VFHL IO = 0 mA, VO < 5 V 0.8 V *1 Typical values at TA = 25C. *2 Maximum pulse width = 50 s, Maximum duty cycle = 0.5%. *3 Maximum pulse width = 10 s, Maximum duty cycle = 0.2% *4 VOH is measured with the DC load current in this testing (Maximum pulse width = 2 ms, Maximum duty cycle = 20%). R08DS0015EJ0001 Rev.0.01 May 12, 2010 Page 6 of 15 Preliminary document Specifications in this document are tentative and subject to change. PS9505,PS9505L1,PS9505L2,PS9505L3 Chapter Title SWITCHING CHARACTERISTICS (TA = -40 to +110C, VCC = 15 to 30 V, IF (ON) = 7 to 16 mA, VF (OFF) = -2 to 0.8 V, VEE = GND, unless otherwise specified) Parameter Propagation Delay Time (L H) Propagation Delay Time (H L) Pulse Width Distortion (PWD) Propagation Delay Time (Difference Between Any Two Products) Rise Time Fall Time UVLO (Turn On Delay) UVLO (Turn Off Delay) Common Mode Transient Immunity at High Level Output *3 Symbol tPLH tPHL |tPHL-tPLH| tPHL-tPLH Conditions Rg = 10 , Cg = 10 nF, f = 10 kHz, Duty Cycle = 50% , IF = 10 mA *2 MIN. TYP. *1 MAX. 0.25 0.25 0.1 0.1 Unit 0.18 0.18 -0.1 -0.1 0.02 s s s s tr tf tUVLO ON VO > 5 V, IF = 10 mA 50 50 0.8 0.6 25 ns ns s s kV/s tUVLO OFF VO < 5 V, IF = 10 mA |CMH| TA = 25C, IF = 10 to 16 mA, VCC = 30 V, VO (MIN.) = 26 V, VCM = 1.5 kV |CML| TA = 25C, IF = 0 mA, VCC = 30 V, VO (MAX.) = 1 V, VCM = 1.5 kV 25 Common Mode Transient Immunity at Low Level Output *3 kV/s *1 Typical values at TA = 25C. *2 This load condition is equivalent to the IGBT load at 1 200 V/75 A. *3 Connect pin 1 and pin 4 to the LED common. R08DS0015EJ0001 Rev.0.01 May 12, 2010 Page 7 of 15 Preliminary document Specifications in this document are tentative and subject to change. PS9505,PS9505L1,PS9505L2,PS9505L3 TEST CIRCUIT Chapter Title Fig. 1 IOH Test Circuit Fig. 2 IOL Test Circuit 1 2 3 IF = 7 to 16 mA 4 SHIELD 8 7 0.1 F 6 5 IOH VCC = 15 to 30 V 4V 1 2 3 4 SHIELD 8 7 0.1 F 6 5 IOL VCC = 15 to 30 V 2.5 V Fig. 3 VOH Test Circuit Fig. 4 VOL Test Circuit 1 2 IF = 7 to 16 mA 3 4 SHIELD 8 7 0.1 F 6 5 100 mA VOH VCC = 15 to 30 V 1 2 3 4 SHIELD 8 7 6 5 0.1 F VCC = 15 to 30 V VOL 100 mA Fig. 5 IFLH Test Circuit Fig. 6 UVLO Test Circuit 1 2 IF 3 4 SHIELD 8 7 6 5 0.1 F VO > 5 V VCC = 15 to 30 V 1 IF = 10 mA 2 3 4 SHIELD 8 7 6 5 0.1 F VCC VO > 5 V R08DS0015EJ0001 Rev.0.01 May 12, 2010 Page 8 of 15 Preliminary document Specifications in this document are tentative and subject to change. PS9505,PS9505L1,PS9505L2,PS9505L3 Fig. 7 tPLH, tPHL, tr, tf Test Circuit and Wave Forms Chapter Title 1 IF = 10 mA 10 kHz 50% DUTY CYCLE 2 500 3 4 SHIELD 8 7 6 5 0.1 F VO 10 10 nF IF VCC = 15 to 30 V tr tf 90% 50% 10% tPLH tPHL VOUT Fig. 8 CMR Test Circuit and Wave Forms 1 IF A B 2 3 4 SHIELD 8 7 6 5 0.1 F VO VCC = 30 V VCM VCM V = t t 0V VO (Switch A: IF = 10 to 16 mA) VO (Switch B: IF = 0 mA) t VOH 26 V 1V VOL VCM = 1.5 kV Remark CMR Test : Connect pin 1 and pin 4 to the LED common. R08DS0015EJ0001 Rev.0.01 May 12, 2010 Page 9 of 15 Preliminary document Specifications in this document are tentative and subject to change. PS9505,PS9505L1,PS9505L2,PS9505L3 TAPING SPECIFICATIONS (UNIT: mm) Chapter Title Outline and Dimensions (Tape) 2.00.1 4.00.1 1.750.1 1.5 +0.1 -0 4.5 MAX. 11.50.1 24.00.3 12.80.1 2.050.05 12.00.1 10.70.1 4.10.1 0.30.05 Tape Direction PS9505L2-E3 Outline and Dimensions (Reel) 2.00.5 3302.0 2.00.5 13.00.2 R 1.0 21.00.8 25.51.0 29.51.0 1001.0 Packing: 1 000 pcs/reel 23.9 to 27.4 Outer edge of flange R08DS0015EJ0001 Rev.0.01 May 12, 2010 Page 10 of 15 Preliminary document Specifications in this document are tentative and subject to change. PS9505,PS9505L1,PS9505L2,PS9505L3 Chapter Title Outline and Dimensions (Tape) 2.00.1 4.00.1 1.5 +0.1 -0 1.750.1 5.3 MAX. 16.00.3 7.50.1 10.40.1 1.550.1 12.00.1 10.30.1 4.750.1 0.350.05 Tape Direction PS9505L3-E3 Outline and Dimensions (Reel) 2.00.5 2.00.5 13.00.2 3302.0 1001.0 R 1.0 21.00.8 17.51.0 21.51.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange R08DS0015EJ0001 Rev.0.01 May 12, 2010 Page 11 of 15 Preliminary document Specifications in this document are tentative and subject to change. PS9505,PS9505L1,PS9505L2,PS9505L3 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) Chapter Title D A B C Part Number PS9505L2 PS9505L3 Lead Bending lead bending type (Gull-wing) for long creepage distance (surface mount) lead bending type (Gull-wing) for surface mount A 10.2 8.2 B 2.54 2.54 C 1.7 1.7 D 2.2 2.2 R08DS0015EJ0001 Rev.0.01 May 12, 2010 Page 12 of 15 Preliminary document Specifications in this document are tentative and subject to change. PS9505,PS9505L1,PS9505L2,PS9505L3 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Chapter Title Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron * Peak Temperature (lead part temperature) * Time (each pins) * Flux 350C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100C R08DS0015EJ0001 Rev.0.01 May 12, 2010 Page 13 of 15 Preliminary document Specifications in this document are tentative and subject to change. PS9505,PS9505L1,PS9505L2,PS9505L3 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Chapter Title 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. Board designing (1) By-pass capacitor of more than 0.1 F is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. (2) In older to avoid malfunctions and characteristics degradation, IGBT collector or emitter traces should not be closed to the LED input. (3) Pins 1, 4 (which is an NC*1 pin) can either be connected directly to the GND pin on the LED side or left open. Unconnected pins should not be used as a bypass for signals or for any other similar purpose because this may degrade the internal noise environment of the device. *1 NC: Non-Connection (No Connection) 3. Make sure the rise/fall time of the forward current is 0.5 s or less. 4. In order to avoid malfunctions, make sure the rise/fall slope of the supply voltage is 3 V/s or less. 5. Avoid storage at a high temperature and high humidity. R08DS0015EJ0001 Rev.0.01 May 12, 2010 Page 14 of 15 Preliminary document Specifications in this document are tentative and subject to change. PS9505,PS9505L1,PS9505L2,PS9505L3 Chapter Title Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. R08DS0015EJ0001 Rev.0.01 May 12, 2010 Page 15 of 15 Revision History PS9505,PS9505L1,PS9505L2,PS9505L3 Preliminary Data Sheet Description Summary First Edition issued Rev. 0.01 Date May 12, 2010 Page - All trademarks and registered trademarks are the property of their respective owners. C-1 |
Price & Availability of PS9505L1-AX
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |