![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
No. STSE-CC7117A SPECIFICATIONS FOR NICHIA CHIP TYPE RED LED MODEL : NS6R083T NICHIA CORPORATION -0- Nichia STSE-CC7117A 1.SPECIFICATIONS (1) Absolute Maximum Ratings Item Forward Current Pulse Forward Current Allowable Reverse Current Power Dissipation Operating Temperature Storage Temperature Dice Temperature Symbol IF IFP IR PD Topr Tstg Tj Absolute Maximum Rating 300 600 85 0.84 -30 ~ + 85 -40 ~ +100 120 (Ta=25C) Unit mA mA mA W C C C IFP Conditions : Pulse Width < 10msec. and Duty < 1/10 = = (2) Initial Electrical/Optical Characteristics Item Symbol Forward Voltage VF Luminous Flux v x Chromaticity Coordinate y Please refer to CIE 1931 chromaticity diagram. Condition IF=240[mA] IF=240[mA] IF=240[mA] IF=240[mA] Typ. (2.2) (24) 0.700 0.299 (Ta=25C) Max. Unit 2.8 V lm - (3) Ranking Item Rank P10 Rank P9 Rank P8 Rank P7 Symbol v Condition Min. 25.5 21.4 18.0 15.1 Luminous Flux IF=240[mA] (Ta=25C) Max. Unit 30.3 25.5 lm 21.4 18.0 Luminous Flux Measurement allowance is 10%. Color Rank x y 0.67 0.27 (IF=240mA,Ta=25C) Rank R 0.67 0.73 0.73 0.33 0.33 0.27 Color Coordinates Measurement allowance is 0.01. 2.INITIAL OPTICAL/ELECTRICAL CHARACTERISTICS Please refer to figure's page. -1- Nichia STSE-CC7117A 3.OUTLINE DIMENSIONS AND MATERIALS Please refer to figure's page. Material as follows ; Package Encapsulating Resin Electrodes : : : Heat-Resistant Polymer Silicone Resin (with Diffused) Ag Plating Copper Alloy 4.PACKAGING * The LEDs are packed in cardboard boxes after taping. Please refer to figure's page. The label on the minimum packing unit shows ; Part Number, Lot Number, Ranking, Quantity * In order to protect the LEDs from mechanical shock, we pack them in cardboard boxes for transportation. * The LEDs may be damaged if the boxes are dropped or receive a strong impact against them, so precautions must be taken to prevent any damage. * The boxes are not water resistant and therefore must be kept away from water and moisture. * When the LEDs are transported, we recommend that you use the same packing method as Nichia. 5.LOT NUMBER The first six digits number shows lot number. The lot number is composed of the following characters; - Year ( 6 for 2006, 7 for 2007 ) - Month ( 1 for Jan., 9 for Sep., A for Oct., - Nichia's Product Number - Ranking by Color Coordinates - Ranking by Luminous Flux B for Nov. ) -2- Nichia STSE-CC7117A 6.RELIABILITY (1) TEST ITEMS AND RESULTS Test Item Resistance to Soldering Heat (Reflow Soldering) Solderability (Reflow Soldering) Thermal Shock Temperature Cycle Moisture Resistance Cyclic High Temperature Storage Temperature Humidity Storage Low Temperature Storage Steady State Operating Life Steady State Operating Life of High Temperature Steady State Operating Life of High Humidity Heat Steady State Operating Life of Low Temperature Vibration Standard Test Method JEITA ED-4701 300 301 JEITA ED-4701 300 303 JEITA ED-4701 300 307 JEITA ED-4701 100 105 JEITA ED-4701 200 203 JEITA ED-4701 200 201 JEITA ED-4701 100 103 JEITA ED-4701 200 202 Test Conditions Tsld=260C, 10sec. (Pre treatment 30C,70%,168hrs.) Tsld=215 5C, 3sec. (Lead Solder) 0C ~ 100C 15sec. 15sec. -40C ~ 25C ~ 100C ~ 25C 30min. 5min. 30min. 5min. 25C ~ 65C ~ -10C 90%RH 24hrs./1cycle Ta=100C Ta=60C, RH=90% Ta=-40C Ta=25C, IF=300mA Tested with Nichia standard circuit board. Note 2 times Number of Damaged 0/22 1 time over 95% 20 cycles 100 cycles 10 cycles 1000 hrs. 1000 hrs. 1000 hrs. 1000 hrs. 1000 hrs. 500 hrs. 1000 hrs. 48min. 0/22 0/50 0/50 0/22 0/22 0/22 0/22 0/22 0/22 0/22 0/22 0/22 Ta=85C, IF=250mA Tested with Nichia standard circuit board. 60C, RH=90%, IF=300mA Tested with Nichia standard circuit board. Ta=-30C, IF=240mA Tested with Nichia standard circuit board. JEITA ED-4701 400 403 JEITA ED-4702 JEITA ED-4702 JEITA ED-4701 300 304 Substrate Bending Adhesion Strength Electrostatic Discharges 100 ~ 2000 ~ 100Hz Sweep 4min. 200m/s2 3directions, 4cycles 3mm, 5 1 sec. 5N, 10 1 sec. 1 time 1 time 3 times Negative/Positive 0/22 0/22 0/22 R=1.5k, C=100pF Test Voltage=2kV Thermal resistance of LED with Nichia standard circuit board : Rja 65C/W Nichia standard circuit board : FR4, t=1.6mm, Copper foil, t=0.07mm (2) CRITERIA FOR JUDGING DAMAGE Item Symbol Test Conditions Forward Voltage VF IF=240mA Initial Level Luminous Flux v IF=240mA Initial Level 0.7 The test is performed after the board is cooled down to the room temperature. -3- Criteria for Judgement Min. Max. 1.1 Nichia STSE-CC7117A-1 (A) ... (B) ... -4- Nichia STSE-CC7117A Pre-heat Pre-heat time Peak temperature Soldering time Condition Reflow Soldering Lead Solder Lead-free Solder 180 ~ 200C 120 ~ 150C 120 sec. Max. 120 sec. Max. 240C Max. 260C Max. 10 sec. Max. 10 sec. Max. refer to refer to Temperature - profile 1. Temperature - profile 2. (N2 reflow is recommended.) Hand Soldering Temperature Soldering time 350C Max. 3 sec. Max. (one time only) Although the recommended soldering conditions are specified in the above table, reflow or hand soldering at the lowest possible temperature is desirable for the LEDs. A rapid-rate process is not recommended for cooling the LEDs down from the peak temperature. [Temperature-profile (Surface of circuit board)] Use the conditions shown to the under figure. <1 : Lead Solder> 2.5 ~ 5C / sec. Pre-heating 120 ~ 150C 60sec.Max. Above 200C <2 : Lead-free Solder> 240C Max. 10sec. Max. 1 ~ 5C / sec. 1 ~ 5C / sec. Pre-heating 180 ~ 200C 60sec.Max. Above 220C 260C Max. 10sec. Max. 2.5 ~ 5C / sec. 120sec.Max. 120sec.Max. [Recommended soldering pad design] Thin line boxesSolder resist opening Thick line boxesLand pattern Make sure the die heat sink is electrically connected to the cathode(K). Use the following conditions shown in the figure. (9.5) Die Heat Sink 2.05 1.05 (4.3) K 1.1 4.5 8 A 3.9 (Unit : mm) * Occasionally there is a brightness decrease caused by the influence of heat or ambient atmosphere during air reflow. It is recommended that the User use the nitrogen reflow method. * The encapsulated material of the LEDs is silicone. Therefore the LEDs have a soft surface on the top of package. The pressure to the top surface will be influence to the reliability of the LEDs. Precautions should be taken to avoid the strong pressure on the encapsulated part. So when using the chip mounter, the picking up nozzle that does not affect the silicone resin should be used. * Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a hot plate should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. * Reflow soldering should not be done more than two times. * Die Heat sink is to be soldered. If not, please use the heat conductive adhesive. * When soldering, do not put stress on the LEDs during heating. * After soldering, do not warp the circuit board. -5- Nichia STSE-CC7117A -6- Nichia STSE-CC7117A -7- Nichia STSE-CC7117A ICI Chromaticity Diagram 0.9 520 530 0.8 510 0.7 540 550 560 0.6 570 500 0.5 580 590 y 0.4 600 610 620 630 0.3 490 R 0.2 480 0.1 0 0 470 460 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 x Color Coordinates Measurement allowance is 0.01. -8- Forward Voltage vs. Forward Current Ta=25C 240 100 50 Relative Luminous Flux (a.u.) 1000 Forward Current IFP (mA) Forward Current vs. Relative Luminous Flux 3.0 2.5 2.0 1.5 1.0 0.5 0 0 100 200 300 400 500 600 700 Forward Current IFP (mA) Ta=25C Allowable Forward Current IFP (mA) Duty Ratio vs. Allowable Forward Current 1000 Ta=25C 600 300 200 10 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 Forward Voltage VF (V) 100 1 5 10 20 50 100 Duty Ratio (%) Ambient Temperature vs. Forward Voltage IFP=240mA Relative Luminous Flux (a.u.) 2.8 Forward Voltage VF (V) 2.6 2.4 2.2 2.0 1.8 1.6 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta (C) Ambient Temperature vs. Relative Luminous Flux 2.0 IFP=240mA 1.0 Allowable Forward Current IF (mA) Ambient Temperature vs. Allowable Forward Current 500 400 300 250 200 100 0 0 Thermal resistance Rja=35C/W -9- 0.5 Thermal resistance Rja=65C/W Typical measuring PWB 0.2 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta (C) 20 40 60 80 100 Ambient Temperature Ta (C) Nichia STSE-CC7117A Model NS6R083 NICHIA CORPORATION Title No. CHARACTERISTICS 070628767821 Ambient Temperature vs. Chromaticity Coordinate (D) IFP=240mA 0.32 0.31 -30C(621nm) 0C(623nm) 25C(625nm) 50C(627nm) 85C(630nm) Spectrum Relative Emission Intensity (a.u.) 0.33 1.2 1.0 0.8 0.6 0.4 0.2 0 450 500 550 600 650 700 750 Wavelength (nm) Ta=25C IFP=240mA y 0.30 0.29 0.28 0.68 0.69 0.70 0.71 0.72 0.73 x Ambient Temperature vs. Dominant Wavelength Dominant Wavelength D (nm) Dominant Wavelength D (nm) Forward Current vs. Dominant Wavelength 631 629 627 625 623 621 619 10 100 1000 Relative Illuminance (a.u.) Directivity 1.0 0 Ta=25C IFP=240mA 10 20 30 40 50 0.5 60 70 80 0 90 60 30 0 0.5 90 1.0 631 629 627 625 623 621 619 -40 -20 0 20 40 60 80 100 IFP=240mA Ta=25C -10- Nichia STSE-CC7117A Model NS6R083 NICHIA CORPORATION Title No. CHARACTERISTICS 070628767831 4.3 3.2 Internal Circuit Cathode Die Heatsink 4.3 3.5 Protection device Cathode mark C 1.5 0.6 4.85 Anode Die Heatsink -11- 6.5 5 0.25 3.4 0.175 1.35 3.4 5 A K 1.6 Nichia STSE-CC7117A ITEM PACKAGE ENCAPSULATING RESIN ELECTRODES MATERIALS Heat-Resistant Polymer Silicone Resin (with Diffused) Ag Plating Copper Alloy Model NS6R083 Unit mm 7/1 Scale Allow 0.2 NS6R083 has a protection device built in as a protection circuit against static electricity. NICHIA CORPORATION Title No. OUTLINE DIMENSIONS 070622767481 Taping part 1.5+0.1 -0 40.1 20.05 Cathode mark 5.50.05 12+0.3 - 0.1 6.70.1 1.750.1 0.20.05 Reel part 180+0 -3 15.41 13+1 -0 2 1 0.8 13 0.2 80.1 1.5 +0.2 -0 5.20.1 1.550.1 Label RED LED TYPE NS6R083T LOT xxxxxxQTY pcs RoHS Reel end of tape No LEDs LEDs mounting part No LEDs 60+1 -0 Pull direction Top cover tape Embossed carrier tape -12Reel Lead Min.160mm (No LEDs) Reel Lead Min.100mm (No LEDs) Reel Lead Min.400mm Nichia STSE-CC7117A 1,400pcs/Reel Model Taping is based on the JIS C 0806 : Packaging of Electronic Components on Continuous Tapes. NS6R083T Unit mm Scale Allow NICHIA CORPORATION Title No. TAPING DIMENSIONS 070622767491 Nichia STSE-CC7117A The reel and moisture absorbent material are put in the moisture proof foil bag and then heat sealed. Reel Label Seal TYPE LOT QTY NICHIA RED LED NS6R083T xxxxxxPCS NICHIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN RoHS Moisture absorbent material Moisture proof foil bag The box is partitioned with the cardboard. Label NICHIA Nichia LED RED LED TYPE RANK QTY NS6R083T PCS NICHIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN RoHS Packing unit Moisture proof foil bag Cardboard box Cardboard box S Cardboard box M Cardboard box L Reel/bag 1reel Quantity/bag (pcs) 1,400 MAX. Reel/box 5reel MAX. 10reel MAX. 20reel MAX. Quantity/box (pcs) 7,000 MAX. 14,000 MAX. 28,000 MAX. Dimensions (mm) 291 237 120 8t 259 247 243 5t 444 262 259 8t Model NS6R083T NICHIA CORPORATION Title No. PACKING 070622767501 -13- |
Price & Availability of NS6R083T
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |