![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PLCC-4 TOPLED Pb Lead-Free Parts LUY9553-4R/S3/TR2 DATA SHEET DOC. NO REV. DATE : QW0905-LUY9553-4R/S3/TR2 :A : 16 - Apr.- 2007 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553-4R/S3/TR2 Page 1/8 Features *package : 12mm tape on 7" diameter reels. *feature of the device:more light due to higher optical efficiency,higher ambient temperature at the same current possible compared to TOPLED *assembly methods:suitabl for all SMT assembly methods *ESD-withstand voltage:up to 2kv acc. to JESD22-A114-B Applications *traffic lights *backlighting(LCD,switches,keys,displays,illuminated advertising) *interior and exterior automotive lighting(e.g.dashboard backlighting,turn signal lamps,sidemarkers, brake lights) *substitution of micro incandescent lamps *marker lights(e.g.exit ways,etc.) *signal and symbol luminaire Package Dimensions 3.3 2.9(.110) 1.95(.073) 0.7 (.028) 0.7 (.028) 0.9(.035) 3.5 (.138) 0.9(.035) 2 3 3 2 3.33(.131) 2.8 1 ANODE 4 0.5(.020) 4 2.2(.106) 2.2 (.106) 1 2 1.3 3 0.95(.037) 1 Note : 1.All dimension are in millimeter tolerance is 0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. 4 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553-4R/S3/TR2 Page 2/8 Absolute Maximum Ratings at Ta=25 Ratings Parameter Symbol UYR Forward Current Peak Forward Current (1/10 Duty cycle,0.1ms Pulse Width) Power Dissipation Reverse Current @5V Electrostatic Discharge Operating Temperature Storage Temperature IF IFP PD Ir ESD Topr Tstg 70 100 200 10 2000 -40 ~ +100 -40 ~ +100 mA mA mW UNIT A V IR-Reflow Profile for lead free soldering(Acc.to J-STD-020B) 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile 250 255C 240C 217C 260C -5C 245C 5C +5C 235C -0C Ramp Down 3k/s(max) +0C 200 10 s min 30 s max 150 120 s max 100 Ramp Up 3k/s(max 25C 0 0 50 100 150 200 t 250 100 s max 50 300 s LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553-4R/S3/TR2 Page 3/8 Typical Electrical & Optical Characteristics (Ta=25 ) PART NO MATERIAL COLOR Emitted Lens Water Clear Dominant wave length Spectral halfwidth nm Dnm Forward voltage @50mA(V) Luminous intensity @50mA(mcd) Viewing angle 2 1/2 (deg) Min. Max. Min. Max. 590 20 1.7 2.8 800 5000 68 LUY9553-4R/S3/TR2 AlGaInP Yellow Note : 1.The forward voltage data did not including 0.1V testing tolerance. 2. The luminous intensity data did not including 15% testing tolerance. Recommended Solder Pad useable for PLCC-4 TOPLED 2.6(.102) 0.4 (.016) 4.5 (.177) 1.5(.059) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553-4R/S3/TR2 Page 4/8 BIN Code List Luminous Intensity Bin Code V W X Y Min. 800 1250 2000 3200 Unit:mcd@50mA Max. 1250 2000 3200 5000 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553-4R/S3/TR2 Page 5/8 Typical Electro-Optical Characteristics Curve UYR CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Luminous Intensity vs. Forward Current Forward Current(mA) 150 5.0 Luminous Intensity Normalize @20mA 4.0 3.0 2.0 1.0 0.0 0 50 100 150 100 50 0 0 0.5 1.0 1.5 2.0 2.5 3.0 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature Forward Current(mA) Fig.4 Luminous Intensity vs. Temperature 1.06 1.04 1.02 1.00 0.98 0.96 0.94 -40 -20 0 20 40 60 80 100 Luminous Intensity@20mA Normalize @25 Forward Voltage@20mA Normalize @25 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient Temperature() Ambient Temperature() Fig.5 Relative Intensity vs. Wavelength 1.0 Fig.6 Directivity Radiation Relative Intensity@20mA 0 -30 30 0.5 -60 60 0.0 500 550 600 650 100% 75% 50% 25% 0 25% 50% 75% 100% Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553-4R/S3/TR2 Page 6/8 Reel Dimensions 13.00.5 330 80 24.4 +2 0 8.0 Min1.5 4.0 2.0 1.75 0.3 7.5 160.3 13.3 3.9 Polarity 3.2 3.2 Part No. LUY9553-4R/S3/TR2 Description 12.0mm tape,7"reel Quantity/Reel 3000 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553-4R/S3/TR2 Page 7/8 Drive Method An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as shown in Circuit A below Circuit model A LED Circuit model B LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553-4R/S3/TR2 Reliability Test: Page 8/8 Classification Test Item Test Condition 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=50mA 3.t=1000 hrs (-24hrs, +72hrs) Reference Standard MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 Operating Life Test High Temperature Storage Test Endurance Test Low Temperature Storage Test 1.Ta=1 005 2.t=1000 hrs (-24hrs, +72hrs) MIL-STD-883D:1008 JIS C 7021: B-10 1.Ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) JIS C 7021: B-12 High Temperature High Humidity Storage Test 1.Ta=65 5 2.RH=90 %~95% 3.t=240hrs 2hrs MIL-STD-202F:103B JIS C 7021: B-11 Thermal Shock Test 1.Ta=105 5&-405 (30min) (30min) 2.total 100 cycles MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 Solderability Test 1.T.Sol=235 5 2.Immersion time 2 0.5sec 3.Coverage 95% of the dipped surface Temperature Cycling Environmental Test 1.105 ~ 25 ~ -55 ~ 25 30mins 5mins 30mins 5mins 2.10 Cyeles IR Reflow Ramp-up rate(217 to Peak) +3 second max Temp. maintain at 175( 25) 180 seconds max Temp. maintain above 217 60-150 seconds Peak temperature range 260+5/-0 Time within 5 of actual Peak Temperature(tp) 10-30 seconds Ramp-down rate +6 /second max MIL-STD-750D:2031.2 J-STD-020B |
Price & Availability of LUY9553-4R-S3-TR2
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |