 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| UG(F,B)15HT & UG(F,B)15JT Vishay General Semiconductor High Voltage Ultrafast Rectifier TO-220AC ITO-220AC FEATURES * Glass passivated chip junction * Ultrafast recovery times * Soft recovery charateristics * Low switching losses, high efficiency 2 UG15xT PIN 1 PIN 2 2 1 UGF15xT PIN 1 * High forward surge capability * Meets MSL level 1, per J-STD-020, LF maximum peak of 245 C (for TO-263AB package) * Solder dip 260 C, 40 s (for TO-220AC and ITO-220AC package) * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 1 CASE PIN 2 TO-263AB K 2 1 UGB15xT PIN 1 PIN 2 K HEATSINK TYPICAL APPLICATIONS For use in high voltage, high frequency power factor correctors, switching mode power supplies, freewheeling diodes and secondary dc-to-dc rectification application. MECHANICAL DATA Case: TO-220AC, ITO-220AC, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC-Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. 15 A 500 V, 600 V 135 A 35 ns 1.5 V 150 C MAXIMUM RATINGS (TC = 25 C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum working reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min SYMBOL VRRM VRWM VRMS VDC IF(AV) IFSM TJ, TSTG VAC UG15HT 500 400 350 500 15 135 - 55 to + 150 1500 UG15JT 600 480 420 600 UNIT V V V V A A C V Document Number: 88828 Revision: 27-Aug-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 881 UG(F,B)15HT & UG(F,B)15JT Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum DC reverse current at VRWM Maximum reverse recovery time Maximum reverse recovery time Typical softness factor (tb/ta) Maximum reverse recovery current Peak forward recovery time TEST CONDITIONS IF = 15 A TJ = 25 C TJ = 125 C TJ = 25 C TJ = 125 C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A IF = 1.0 A, dI/dt = 50 A/s, VR = 30 V, Irr = 0.1 IRM IF = 15 A, dI/dt = 240 A/s, VR = 400 V, Irr = 0.1 IRM IF = 15 A, dI/dt = 120 A/s, VR = 400 V, TC = 125 C IF = 15 A, dI/dt = 120 A/s, VF = 1.1 x VF max. SYMBOL VF IR trr trr S IRM tfr UG15HT 1.75 1.50 30 4.0 35 50 0.9 9.0 500 UG15JT UNIT V A mA ns ns A ns THERMAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER Typical thermal resistance from junction to case Note: (1) Pulse test: 300 s pulse width, 1 % duty cycle SYMBOL RJC UG15 1.5 UGF15 3.0 UGB15 1.5 UNIT C/W ORDERING INFORMATION (Example) PACKAGE TO-220AC ITO-220AC TO-263AB TO-263AB TO-220AC ITO-220AC TO-263AB TO-263AB Note: (1) Automotive grade AEC-Q101 qualified PREFERRED P/N UG15JT-E3/45 UGF15JT-E3/45 UGB15JT-E3/45 UGB15JT-E3/81 UG15JTHE3/45 (1) UGF15JTHE3/45 (1) UGB15JTHE3/45 (1) UGB15JTHE3/81 (1) UNIT WEIGHT (g) 1.85 1.98 1.35 1.35 1.85 1.98 1.35 1.35 PACKAGE CODE 45 45 45 81 45 45 45 81 BASE QUANTITY 50/tube 50/tube 50/tube 800/reel 50/tube 50/tube 50/tube 800/reel DELIVERY MODE Tube Tube Tube Tape and reel Tube Tube Tube Tape and reel www.vishay.com 882 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88828 Revision: 27-Aug-08 UG(F,B)15HT & UG(F,B)15JT Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 16 UG15JT, UGB15JT 14 12 10 8 6 4 2 0 25 50 75 100 125 150 175 UGF15JT 10 000 Instantaneous Reverse Leakage Current (A) Average Forward Current (A) TJ = 125 C 1000 TJ = 100 C 100 10 TJ = 25 C 1 0 20 40 60 80 100 Case Temperature (C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Forward Current Derating Curve Figure 4. Typical Reverse Leakage Characteristics 160 1000 Peak Forward Surge Current (A) 140 120 100 80 60 40 20 0 1 10 100 1 0.1 Junction Capacitance (pF) 100 10 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Figure 5. Typical Junction Capacitance 100 450 Instantaneous Forward Current (A) Stored Charge/Recovery Time (nC/ns) 400 350 300 250 200 150 100 50 0 trr Qrr 10 TJ = 125 C 15 A, 240 A/s, 400 V 1 TJ = 100 C 15 A, 240 A/s, 400 V 15 A, 120 A/s, 400 V 1 A, 50 A/s, 30 V 0.1 TJ = 25 C 0.01 0.1 0.5 0.9 1.3 1.7 2.1 25 50 75 100 125 Instantaneous Forward Voltage (V) Junction Temperature (C) Figure 3. Typical Instantaneous Forward Characteristics Figure 6. Reverse Switching Characteristics Document Number: 88828 Revision: 27-Aug-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 883 UG(F,B)15HT & UG(F,B)15JT Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AC 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 1 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) PIN 1 PIN 2 CASE ITO-220AC 0.404 (10.26) 0.384 (9.75) 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 45 REF. 0.671 (17.04) 0.651 (16.54) PIN 0.076 (1.93) REF. 0.076 (1.93) REF. 7 REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.603 (15.32) 0.573 (14.55) 0.600 (15.24) 0.580 (14.73) 7 REF. 0.350 (8.89) 0.330 (8.38) PIN 1 2 0.191 (4.85) 0.171 (4.35) 7 REF. 2 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.110 (2.79) 0.100 (2.54) 0.037 (0.94) 0.027 (0.68) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 0.025 (0.64) 0.015 (0.38) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.028 (0.71) 0.020 (0.51) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.055 (1.40) 0.047 (1.19) 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) 0.33 (8.38) MIN. 0.190 (4.83) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) www.vishay.com 884 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88828 Revision: 27-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of UG15JT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |