 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENA0313 CPH3345 SANYO Semiconductors DATA SHEET P-Channel Silicon MOSFET CPH3345 Features * General-Purpose Switching Device Applications 4V drive. Specifications Absolute Maximum Ratings at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board (1200mm2!0.8mm) Conditions Ratings --30 20 --2 --8 1 150 --55 to +150 Unit V V A A W C C Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 RDS(on)3 Ciss Coss Crss td(on) tr td(off) tf Conditions ID=--1mA, VGS=0V VDS=-30V, VGS=0V VGS=16V, VDS=0V VDS=-10V, ID=--1mA VDS=-10V, ID=--1A ID=--1A, VGS=-10V ID=--0.5A, VGS=-4.5V ID=--0.5A, VGS=-4V VDS=-10V, f=1MHz VDS=-10V, f=1MHz VDS=-10V, f=1MHz See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Ratings min --30 --1 10 --1.2 1.3 2.3 98 168 190 340 70 56 9.0 15.5 36 30.5 130 240 270 --2.6 typ max Unit V A A V S m m m pF pF pF ns ns ns ns Marking : YU Continued on next page. Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before usingany SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 80906 / 21006PE MS IM TB-00001923 No. A0313-1/4 CPH3345 Continued from preceding page. Parameter Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol Qg Qgs Qgd VSD Conditions VDS=--10V, VGS=--10V, ID=-2A VDS=--10V, VGS=--10V, ID=-2A VDS=--10V, VGS=--10V, ID=-2A IS=--2A, VGS=0V Ratings min typ 7.7 1.15 1.4 --0.85 --1.2 max Unit nC nC nC V Package Dimensions unit : mm 7015-004 0.4 0.15 Switching Time Test Circuit VIN 0V --10V VDD= --15V 3 0.6 0.05 PW=10s D.C.1% 0.2 VIN ID= --1A RL=15 0.6 1.6 2.8 D VOUT 1 1.9 2.9 2 G 0.7 0.9 1 : Gate 2 : Source 3 : Drain SANYO : CPH3 CPH3345 P.G 50 0.2 S --15.0V --10.0 V 4.5 --4. V 0V --2.0 --1.8 --1.6 ID -- VDS V --3.0 V -- --4 ID -- VGS VDS= --10V --6.0 Drain Current, ID -- A --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 Drain Current, ID -- A --3 --8.0 V --2 --1 --0.2 --0.4 --0.6 --0.8 --1.0 IT10674 0 0 --0.5 --1.0 --1.5 --2.0 --2.5 25 --3.0 --3.5 Ta= 75C C --25 C VGS= --2.5V --4.0 --4.5 Drain-to-Source Voltage, VDS -- V 400 RDS(on) -- VGS Gate-to-Source Voltage, VGS -- V 350 IT10675 RDS(on) -- Ta Ta=25C Static Drain-to-Source On-State Resistance, RDS(on) -- m Static Drain-to-Source On-State Resistance, RDS(on) -- m 350 300 300 --1A 250 250 ID= --0.5A 200 150 100 50 0 0 --2 --4 --6 --8 --10 --12 --14 --16 200 --0 I D= = --4 VGS .5A, .0V 150 -I D= , VG 0.5A --4 S= .5V 100 .0 I D= --1 = --10.0 A, V GS V 50 0 --60 --40 --20 0 20 40 60 80 100 120 140 160 Gate-to-Source Voltage, VGS -- V IT10676 Ambient Temperature, Ta -- C IT10678 No. A0313-2/4 CPH3345 7 yfs -- ID VDS= --10V Forward Transfer Admittance, yfs -- S 5 3 2 7 5 3 2 IS -- VSD VGS=0V Source Current, IS -- A C 25 1.0 7 5 3 2 = Ta --2 C 5 C 75 --1.0 7 5 3 2 Ta=7 5C --0.4 --0.6 --0.1 7 5 3 2 0.1 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --0.01 --0.2 --25C --0.8 25C --1.0 --1.2 IT10680 Drain Current, ID -- A 7 5 3 IT10679 7 5 SW Time -- ID Ciss, Coss, Crss -- VDS f=1MHz Ciss Diode Forward Voltage, VSD -- V VDD= --15V VGS= --10V Switching Time, SW Time -- ns 2 3 Ciss, Coss, Crss -- pF 100 7 5 3 2 10 7 5 3 2 1.0 --0.01 tf 2 td(off) 100 7 5 3 2 Coss td(on) tr Crss 10 2 3 5 7 --0.1 2 3 5 Drain Current, ID -- A --10 --9 --1.0 IT10681 2 --10 7 5 7 0 --5 --10 --15 --20 --25 --30 IT10682 VGS -- Qg Drain-to-Source Voltage, VDS -- V ASO Gate-to-Source Voltage, VGS -- V VDS= --10V ID= --2A IDP= --8A ID= --2A 10s --8 Drain Current, ID -- A --7 --6 --5 --4 --3 --2 --1 0 0 1 2 3 4 5 6 7 8 IT10683 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 10 m s 10 0 DC 10 1m s s op 0m s er ati on Operation in this area is limited by RDS(on). (T a= 25 C ) --0.01 --0.01 Ta=25C Single pulse Mounted on a ceramic board (1200mm2!0.8mm) 23 5 7 --0.1 23 5 7 --1.0 23 5 7 --10 23 5 Total Gate Charge, Qg -- nC 1.2 PD -- Ta Drain-to-Source Voltage, VDS -- V IT10684 Allowable Power Dissipation, PD -- W 1.0 M ou nt 0.8 ed on ac er 0.6 am ic bo ar d( 0.4 12 00 m m2 ! 0.2 0.8 m m ) 160 0 0 20 40 60 80 100 120 140 Ambient Temperature, Ta -- C IT10685 No. A0313-3/4 CPH3345 Note on usage : Since the CPH3345 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2006. Specifications and information herein are subject to change without notice. PS No. A0313-4/4 |
Price & Availability of CPH3345
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |