![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
plerowTM ALN2642L Internally Matched LNA Module Features * 50 dB Gain at 2642.5 MHz * +12 ~ +17 dBm P1dB * +24 dBm Output IP3 * 1.2 dB Noise Figure * 25 dB Gain Control Range * Power-detecting Function * Power Shutdown Available Description The plerowTM ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals and so on. It has an exceptional performance of low noise figure, high gain, high OIP3, and low bias current. The stability factor is always kept less than unity over the application band in order to confirm its unconditionally stable implementation to the application system environment. The surface-mount module package including the completed matching circuit and other components necessary just in case allows very simple and convenient implementation onto the system board in mass production level. Specifications Parameter Frequency Range Gain Gain Flatness Noise Figure Output IP3 S11 / S22 Output P1dB Power-detecting Range Power-detecting DC Output Switching Time Supply Current Supply Voltage Impedance Max. RF Input Power Package Type & Size Unit MHz dB dB dB dBm dB dBm dBm V sec mA V dBm mm @ T = 25C, VCC = 5 V, Freq. =2642 MHz, 50 ohm Specifications Min 2630 48 50 0.5 1.2 24 -14 / -14 12 ~ 17 -5 ~ +15 0.3 ~ 2.9 250 5 50 C.W 29 ~ 31 (before fail) Surface Mount Type, 36Wx36Lx4.0H 0.7 1.3 Typ Max 2655 More Information Website: www.asb.co.kr E-mail: sales@asb.co.kr Tel: (82) 42-528-7223 Fax: (82) 42-528-7222 ASB Inc., 4th Fl. Venture Town Bldg., 367-17 Goijeong-Dong, Seo-Gu, Daejon 302-716, Korea 1) Operating temperature is -40C to +85C. 2) OIP3 is measured with two tones at an output power of 3 dBm / tone separated by 1 MHz. 3) Note: We recommend that the VSWR toward a source and load be less than 1:4 to avoid an unwanted oscillation. Outline Drawing Pin Number 1 Function Shutdown RF In ATT. Cont. RF Out RF Detect +Vcc Ground ALN2642L 3 5 8 TOP BOTTOM 9 10 SIDE ; soldering area ; 0.5 plated thru hole to ground plane All Other Pins (unit ; mm) 1/1 SUGGESTED FOOTPRINT www.asb.co.kr Note: 1. The number and size of ground via holes in a circuit board is critical for thermal RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of all ground pins for better RF and thermal performance, as shown in the drawing at the left side. October 2007 |
Price & Availability of ALN2642L
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |