![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TC7MH367,368FK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7MH367FK,TC7MH368FK HEX Bus Buffer TC7MH367FK Non-Inverted, 3-State Outputs TC7MH368FK Inverted, 3-State Outputs The TC7MH367FK and TC7MH368FK are advanced high speed CMOS HEX bus buffers fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equivalent bipolar schottky TTL while maintaining the CMOS low power dissipation. They contain six buffers; four buffers are controlled by an enable input (G1), and the other two buffers are controlled by another enable input (G2). The outputs of each buffer group are Weight: 0.02 g (typ.) enabled when G1 and/or G2 inputs are held low; if held high, these outputs are in a high impedance state. The TC7MH367FK is a non-inverting output type, while the TC7MH368FK is an inverting output type. An input protection circuit ensures that 0 to 7 V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5 V to 3 V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages. Features * * * * * * * * High speed: tpd = 3.8 ns (typ.) (VCC = 5 V) Low power dissipation: ICC = 4 A (max) (Ta = 25C) High noise immunity: VNIH = VNIL = 28% VCC (min) Power down protection is provided on all inputs. Balanced propagation delays: tpLH tpHL Wide operating voltage range: VCC (opr) = 2~5.5 V Low noise: VOLP = 0.8 V (max) Pin and function compatible with 74ALS367/368 1 2001-10-23 TC7MH367,368FK Pin Assignment (top view) TC7MH367FK G1 TC7MH368FK 16 15 14 13 12 11 10 9 VCC G2 G1 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC G2 1A 1Y 2A 2Y 3A 3Y GND 1A 1Y 2A 2Y 3A 3Y 6A 6Y 5A 5Y 4A 4Y 6A 6Y 5A 5Y 4A 4Y GND IEC Logic Symbol TC7MH367FK G1 TC7MH368FK G1 (1) (2) (4) (6) (10) EN (3) (5) (7) (9) 1Y 2Y 3Y 4Y (1) (2) (4) (6) (10) EN (3) (5) (7) (9) 1Y 2Y 3Y 4Y 1A 2A 3A 4A 1A 2A 3A 4A G2 (15) (12) (14) EN (11) (13) 5Y 6Y G2 (15) (12) (14) EN (11) (13) 5Y 6Y 5A 6A 5A 6A Truth Table Inputs G Outputs A L H X Y (367) L H Z Y (368) H L Z L L H X: Don't care Z: High impedance 2 2001-10-23 TC7MH367,368FK Maximum Ratings Characteristics Supply voltage range DC input voltage DC output voltage Input diode current Output diode current DC output current DC VCC/ground current Power dissipation Storage temperature Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Tstg Rating -0.5~7.0 -0.5~7.0 -0.5~VCC + 0.5 -20 20 25 50 180 -65~150 Unit V V V mA mA mA mA mW C Recommended Operating Conditions Characteristics Supply voltage Input voltage Output voltage Operating temperature Input rise and fall time Symbol VCC VIN VOUT Topr dt/dv Rating 2.0~5.5 0~5.5 0~VCC -40~85 0~100 (VCC = 3.3 0.3 V) 0~20 (VCC = 5 0.5 V) Unit V V V C ns/V 3 2001-10-23 TC7MH367,368FK Electrical Characteristics DC Characteristics Characteristics Symbol Test Condition VCC (V) 2.0 High level Input voltage 2.0 Low level VIL 3.0~5.5 2.0 IOH = -50 A High level VOH VIN = VIH or VIL IOH = -4 mA Output voltage IOH = -8 mA 3.0 4.5 3.0 4.5 2.0 IOL = 50 A Low level VOL VIN = VIH or VIL IOL = 4 mA IOL = 8 mA 3-state output off-state current Input leakage current Quiescent supply current IOZ IIN ICC VIN = VIH or VIL VOUT = VCC or GND VIN = 5.5 V or GND VIN = VCC or GND 3.0 4.5 3.0 4.5 5.5 0~5.5 5.5 VIH 3.0~5.5 Min 1.50 VCC x 0.7 1.9 2.9 4.4 2.58 3.94 Ta = 25C Typ. 2.0 3.0 4.5 0 0 0 Max 0.50 VCC x 0.3 0.1 0.1 0.1 0.36 0.36 0.25 0.1 4.0 Ta = -40~85C Min 1.50 VCC x 0.7 1.9 2.9 4.4 2.48 3.80 Max V 0.50 VCC x 0.3 0.1 0.1 0.1 0.44 0.44 2.50 1.0 40.0 A A A V Unit 4 2001-10-23 TC7MH367,368FK AC Characteristics (Input: tr = tf = 3 ns) Characteristics Symbol Test Condition VCC (V) 3.3 0.3 Propagation delay time (TC7MH367) tpLH tpHL 5.0 0.5 CL (pF) 15 50 15 50 3.3 0.3 Propagation delay time (TC7MH368) tpLH tpHL 5.0 0.5 15 50 15 50 3.3 0.3 3-state output enable time tpZL tpZH RL = 1 k 5.0 0.5 3.3 0.3 5.0 0.5 (Note1) 3.3 0.3 5.0 0.5 15 50 15 50 3-state output disable time tpLZ tpHZ Output to output skew Input capacitance Output capacitance Power dissipation capacitance tosLH tosHL CIN COUT CPD RL = 1 k 50 50 50 50 Min (Note2) Ta = 25C Typ. 5.9 8.4 4.1 5.6 5.3 7.8 3.8 5.3 6.8 9.3 4.8 6.3 9.9 6.3 4 6 19 Max 8.3 11.8 5.9 7.9 7.5 11.0 5.5 7.5 10.5 14.0 7.2 9.2 13.6 9.2 1.5 1.0 10 Ta = -40~85C Min 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Max 10.0 13.5 7.0 9.0 9.0 12.5 ns 6.5 8.5 12.5 16.0 ns 8.5 10.5 15.5 ns 10.5 1.5 ns 1.0 10 pF pF pF ns Unit Note1: Parameter guaranteed by design. tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn| Note2: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPDVCCfIN + ICC/6 (per bit) 5 2001-10-23 TC7MH367,368FK Noise Characteristics (Input: tr = tf = 3 ns) Characteristics Quiet output maximum dynamic VOL Quiet output minimum dymnamic VOL Minimum high level dynamic input voltage VIH Maximum low level dynamic input voltage VIL Symbol VOLP VOLV VIHD VILD Test Condition VCC (V) CL = 50 pF CL = 50 pF CL = 50 pF CL = 50 pF 5.0 5.0 5.0 5.0 Ta = 25C Typ. 0.4 -0.4 Limit 0.8 -0.8 3.5 1.5 V V V V Unit Input Equivalent Circuit Input 6 2001-10-23 TC7MH367,368FK Package Dimensions Weight: 0.02 g (typ.) 7 2001-10-23 TC7MH367,368FK RESTRICTIONS ON PRODUCT USE 000707EBA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 8 2001-10-23 |
Price & Availability of TC7MH368FK
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |