![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
(R) COMBI/E1-I Power Management Module for ISDN NT1 SPECIFICATION Rev. 02 Type COMBI/E1-I Vi Vo Io 80 mA 120 mA PRODUCT VIEW 195 to 253 Vac out1: 5 V and 28 to 115 Vdc out 2: 40V FEATURES Uko INTERFACE (DC) and MAINS (AC) inputs to enable NPM (Normal Power Mode) and RPM (Restricted Power Mode) CONDITIONS INPUT FILTER TO MEET EMI requirements PEAK INPUT OVERVOLTAGE WITHSTANDING ORDERING NUMBER: GS-COMBI/E1-I AC INPUT PROTECTION FUSE INPUTS TO OUTPUTS INSULATION 2 INSULATED OUTPUTS: Vo1=5 V for NT1 logics Vo2=40 V for "S" interface AUXILIARY LOGIC OUTPUT TTL-COMPATIBLE for LED & NPM/RPM MODE indication. PS1 and PS2 output TTL-compatible INTERNAL RELAY FUNCTION FOR Vo2 POLARITY REVERSE U-INTERFACE ACCORDING TO ETR080 MTBF: 300 Kh, according to MIL HDBK 217-F Operating Temperature: -10 to +70oC "S" INTERFACE TERISTICS: OUTPUT CHARAC- - Peak output of 220 mA for 150 ms - Typical output power 4,5 W - Output filtering to meet ETSI requirements - Hold up time: 20 ms with 4,5 W output power - Continuous short circuit protection - Peak overvoltage withstand:1KV for 10/700 us transversal S-INTERFACE ACCORDING TO ETS 300 012 May 2001 1/6 COMBI/E1-I DESCRIPTION The NT1 Power Management Module COMBI/E1I is a comprehensive solution for ISDN-NT1 (Network Termination Basic Access NTBA) equipment, combining both AC-DC and DC-DC functions. The GS-COMBI/E1-I provide the NTBA with all necessary supply voltages as well as control signals to operate in the different operating modes, typically the Normal Power Mode (NPM) and Restricted Power Mode (RPM). Connected to the main, Input 1 (2 poles AC connector) is the AC input power to the COMBI/E1-I, source of the whole necessary power in normal operating mode, namely in NPM. Input 2 is the DC power source when in RPM, therefore to connect to the U-INTERFACE. The device supply 5V (out 1) for logics and 40 V (out 2) for the S interface both in Normal Power Mode (NPM) and in Restricted Power Mode (RPM). RPM mode is the emergency condition that occurs if the mains (AC) input is not available. An internal "relay function" is available to reverse the 40 V output polarity. A third auxiliary output can be used for LEDs driving and RPM/NPM mode acknowledge (Logic output). The Logic output becomes high (+5V) when in NPM condition. PS1 and PS2 signal overload at the S-interface (PS1 in NPM and PS2 in RPM) The converter offers short-circuit protection on both outputs: particularly, short-circuit on 40V output doesn't affect the +5V output. Out 1, out 2... out 5 share the same common return. 3000 VRMS insulation voltage for 60 seconds (reinforced insulation) is provided among input 1 and all outputs. Same reinforced insulation is also provided between Input 1 and Input 2. 2000 VRMS / 1 min. reinforced insulation is provided between input 2 and all outputs. When in NPM mode (AC main supply), the module max. power consumption is <15 VA (apparent power). Input 2 undervoltage lockout offers high impedance in order to have 10 uA max input current when Vi2 is <18 Volts. The design of the module has been conducted using the following reference standards: EN 60950, VDE0878 part 1 class B (EMC), EN55022 class B (emission), EN50 082-1 (immunity) ITU-T I.430, ETS 300 012 and ETR 080 and ETS300 047 (ISDN BASIC ACCESS, Safety and Protection); anyway, please note that no certification processes have been carried out on the module itself. 2/6 COMBI/E1-I ELECTRICAL CHARACTERISTICS when in NPM (Tamb=25oC, unless otherwise specified.) NPM Standard Condition: Vin1 = 195 to 253 Vrms Vin2 = 28 to 115 Vdc Symbol Vi1 Vi2 fi Vi1st Vi2st Vo1 Vo2 Vo3 Vo4 Parameter Input Voltage 1 Input Voltage 2 Vi1 Input Frequency Start up Input 1 voltage Start up Input 2 voltage Output Voltage 1 Output Voltage 2 Output Voltage 3 Output Voltage 4 (PS 2) Vo5 Output Voltage 5 (PS 1) Vor1 Vor2 Io1 Io2 Ioc2 Io2sc Vi1th Ttr Vi1pk Vi2pk Vo2pk Pi1r Pi1 Vist th Output Ripple voltage 1 Output Ripple voltage 2 Output Current 1 Output Current 2 Output Overcurrent 2 Output 2 short circuit current NPM => threshold RPM mode any polarity Vi1 = 230 VRMS Output parameters Standard Conditions as per NPM Test Condition Min. 195 28 43 Typ. Max. 253 115 56 185 44 4.75 36 4.5 4.75 4.75 4.75 5 40 5 5 5 5 5.25 42 5.25 5.25 5.25 5.25 0.8 20 100 3 0 80 120 260 60 160 5 2 500 1000 9 15 4 Unit VRMS Vdc Hz VRMS Vdc V V V V V V V mVrms mVrms mA mA mA mA Vrms ms kV V V W VA kV ms Output parameters as per Standards Conditions Standard conditions Standard conditions Standard conditions, Io3=0.9 to 3mA Vo2 > 34 v (normal load) Vo2 < 24v (overload) Vo2> 34v (normal load) Vo2 < 24v (overload) Standard conditions BW: 0-20 MHz Standard conditions BW: 0-20 MHz Standard conditions Standard conditions t=150ms, Vo1=34 to 42 V Continuous short circuit 220 240 20 40 Vi1 Output parameters as per Standard Conditions transition NPM => RPM and vice versa t = 8/20 us transversal t= 10/700 us transversal t = 10/700 us transversal NPM standard conditions NPM standard conditions INputs to outputs t=10/700 us (pulse) Transition time Input 1 Transient overvoltage Input 2 Transient overvoltage Output 1 Transient overvoltage Input 1 Real Power Input 1 Apparent Power Insulation Voltage, pulse Hold-up time Vin=195 VRMS Pout 1:0 to 340 mW 20 Pout 2: 4.5 W 3/6 COMBI/E1-I ELECTRICAL CHARACTERISTICS when in RPM (Tamb=25oC, unless otherwise specified.) RPM Standard Condition: Vin1 < 100 Vrms Vin2 = 28 to 115 Vdc Symbol Vi1 Vi2 Vi2st Vo1 Vo2 Vo3 Vo4 Parameter Input Voltage 1 Input Voltage 2 Start Up Input 2 Voltage Output Voltage 1 Output Voltage 2 Output Voltage 3 Output Voltage 4 (PS 2) Vo5 Output Voltage 5 (PS 1) Vor1 Vor2 Io1 Io2 Io2sc Vi1th Ttr Vi1pk Output Ripple Voltage 1 Output Ripple Voltage 2 Output Current 1 Output Current 2 Output 2 short circuit current RPM=>NPM threshold Transition time Input 1 Transient overvoltage mode Vi1 transition NPM => RPM and vice versa t = 8/20 us transversal 2.0 RPM Standard Conditions RPM Standard Conditions RPM Standard conditions, out 3 load=50 kOhm Vo2 > 34v (normal load) Vo2 < 24v (overload) Vo2 > 34v (normal load) Vo2 < 24v (overload) RPM Standard Conditions BW:0-20 Mhz RPM Standard Conditions BW:0-20 Mhz RPM Standard Conditions RPM Standard Conditions Continuous short circuit 3 0 9 4.75 5 4.75 34 5 40 any polarity Test Condition Min. 0 28 Typ. Max. 100 115 44 5.25 42 0.8 5.25 0.8 0.8 0.8 20 100 80 12.5 13.5 185 5 Unit Vrms Vdc Vdc V V V V V V V mVrms mVrms mA mA mA VRMS ms Kv 4/6 COMBI/E1-I COMBI/E1-I Power Management Module TOP VIEW (dimensions in mm PIN CONFIGURATION Input 1 (Vin 1: 230Vac) apply to the WAGO Series connector bottom right in the TOP VIEW Pin No 1 2 3 4 Function DC "U inteface" input (in 2) DC"U inteface" input (in 2) Out 1: +5V output Out common ground GND Pin No 5 6 7 8 Out 2: +/-40 V output Out 3: Logic output (NPM) Out 4: PS 2 Out 5: PS 1 Function 5/6 COMBI/E1-I COMBI/E1-I Power Management Module SIDE VIEW (dimensions in mm) Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics (c) 2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com 6/6 |
Price & Availability of 7951
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |