 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DISCRETE SEMICONDUCTORS DATA SHEET PMBT3640 PNP 1 GHz switching transistor Product specification File under Discrete Semiconductors, SC14 September 1995 Philips Semiconductors Product specification PNP 1 GHz switching transistor DESCRIPTION PNP general purpose switching transistor in a SOT23 package. PINNING PIN 1 2 3 base emitter collector 1 Top view PMBT3640 DESCRIPTION Code: V25 fpage 3 2 MSB003 Fig.1 SOT23. LIMITING VALUES In accordance with the Absolute Maximum System (IEC 134). SYMBOL -VCBO -VCEO -VEBO -IC Ptot Tstg Tj PARAMETER collector-base voltage collector-emitter voltage emitter-base voltage DC collector current total power dissipation storage temperature junction temperature up to Ts = 85 C (note 1) open base open collector CONDITIONS open emitter - - - - - -55 - MIN. MAX. 12 12 4 80 350 150 175 UNIT V V V mA mW C C THERMAL RESISTANCE SYMBOL Rth j-s Note 1. Ts is the temperature at the soldering point of the collector tab. PARAMETER from junction to soldering point (note 1) THERMAL RESISTANCE 260 K/W September 1995 2 Philips Semiconductors Product specification PNP 1 GHz switching transistor CHARACTERISTICS Tj = 25 C unless otherwise specified. SYMBOL Off characteristics -V(BR)CBO -V(BR)CES -V(BR)EBO -ICES -IB hFE -VCEsat collector-base breakdown voltage collector-emitter breakdown voltage emitter-base breakdown voltage collector cut-off current base current -IC = 100 A; IE = 0 -IC = 100 A; VBE = 0 -IE = 100 A; IC = 0 -VCE = 6 V; VBE = 0 -VCE = 6 V; VBE = 0; Tamb = 65 C -VCE = 6 V; VBE = 0 -IC = 10 mA; -VCE = 0.3 V -IC = 50 mA; -VCE = 1 V collector-emitter saturation voltage -IC = 10 mA; -IB = 1 mA -IC = 50 mA; -IB = 5 mA -IC = 10 mA; -IB = 1 mA; Tamb = 65 C -VBEsat base-emitter saturation voltage -IC = 10 mA; -IB = 0.5 mA -IC = 10 mA; -IB = 1 mA -IC = 50 mA; -IB = 5 mA Small-signal characteristics fT Cc Ce td ts tr tf ton transition frequency output capacitance input capacitance -IC = 10 mA; -VCE = 5 V; f = 100 MHz IE = 0; -VCB = 5 V; f = 1 MHz IC = 0; -VEB = 0.5 V; f = 1 MHz -VCC = 6 V; -IC = 50 mA; -VBE(off) = 1.9 V; -IB1 = 5 mA -VCC = 6 V; -IC = 50 mA; -IB1 =-IB2 = 5 mA -VCC = 6 V; -IC = 50 mA; -VBE(off) = 1.9 V; -IB1 = 5 mA -VCC = 6 V; -IC = 50 mA; -IB1 = -IB2 = 5 mA -VCC = 6 V; -IC = 50 mA; -VBE(off) = 1.9 V; -IB1 = 5 mA -VCC = 1.5 V; -IC = 10 mA; -IB1 = 0.5 mA toff turn-off time -VCC = 6 V; -IC = 50 mA; -VBE(off) = 1.9 V; -IB1 = IB2 = 5 mA -VCC = 1.5 V; -IC = 10 mA; -IB1 = IB2 = 0.5 mA On characteristics; pulse test: pulse width 300 s, duty cycle 2%. DC current gain 30 20 - - - 12 12 4 - - - PARAMETER CONDITIONS PMBT3640 MIN. MAX. - - - 0.01 1 10 UNIT V V V A A nA 120 - 0.2 0.6 0.25 0.95 1 1.5 - 3.5 3.5 V V V V V V 0.75 0.8 - 500 - - - - - - - - - - MHz pF pF Switching times delay time storage time rise time fall time turn-on time 10 20 30 12 25 60 35 75 ns ns ns ns ns ns ns ns September 1995 3 Philips Semiconductors Product specification PNP 1 GHz switching transistor PACKAGE OUTLINE Plastic surface mounted package; 3 leads PMBT3640 SOT23 D B E A X HE vMA 3 Q A A1 1 e1 e bp 2 wMB detail X Lp c 0 1 scale 2 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.9 A1 max. 0.1 bp 0.48 0.38 c 0.15 0.09 D 3.0 2.8 E 1.4 1.2 e 1.9 e1 0.95 HE 2.5 2.1 Lp 0.45 0.15 Q 0.55 0.45 v 0.2 w 0.1 OUTLINE VERSION SOT23 REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE 97-02-28 September 1995 4 Philips Semiconductors Product specification PNP 1 GHz switching transistor DEFINITIONS Data Sheet Status Objective specification Preliminary specification Product specification Limiting values PMBT3640 This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications. Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. September 1995 5 |
Price & Availability of PMBT3640
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |