|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MA1065-1 For 1.9 GHz - High Power Amplifier MA1065-1 2. Electrical Performances Standard No. 1 2 Frequency Output Power Ripple Temperature drift 3 ACP 600 kHz deviation 900 kHz deviation f = 1895, 1906, 1918 MHz Pin = -9.0 dBm f = 1895, 1906, 1918 MHz Pout = 36.4 dBm / 4 Shift QPSK Modulation f = 1895, 1906, 1918 MHz < Pin = -9.0 dBm Items Condition Min 1895 35.9 --- --- --- --- --- --- Typ --- 36.4 --- --- --- --- --- --- Max 1918 36.9 0.6 2.0 --- -69.0 -74.0 1 : 1.5 dBc dBc Unit MHz dBm dBp-p dB DESCRIPTION The MA1065-1 are 1.9 GHz band power amplifier modules (Po = +4.0W), constructed by driver-amp, highpower-amp, power-monitor and control-circuit. Input and Output impedances are designed to 50. FEATURES MA1065-1 : Po = +22.4 ~ 36.4 dBm (8 step, Pin = -9.0 dBm) @1.9 GHz Vs = +12.0V, Vg = -7.0V, Vcont = +5.0V APPLICATION Power amplifier module for PHS base station/Japan. OUTLINE DRAWING 3. Demensions and Pin Layout 25 4 2-2 D-sub Connector pin assign 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Vs Vs GND Vg GND GND N/C N/C Vs GND GND GND Vp N/C TXE +12V Power Supply +12V Power Supply Analog GND -10V Power Supply Analog GND Digital GND N/C N/C +12V Power Supply Analog GND Analog GND ANalog GND for Vp RF monitor for ALC N/C Transmission ON/OFF Control (PA Control) Input/Output VSWR Load VSWR With Load VSWR of less than 1:2.0 There is no abnormal Oscillation with Load VSWR of more than 1:2.0 --- --- --- --- -75.0 dBc 5 Spurious In-band Out of band f = 1895 ~ 1918 MHz Pout = 36.4 dBm f = 100 kHz ~ 6 GHz (Except In-band) Pout = 36.4 dBm f = 1906 MHz / 4 Shift QPSK Modulation Pout = 36.4 dBm Pin = -75 dBm L-BAND POWER AMP MA1065-1 SERIAL 70 --- RF OUT RF IN --- --- -65.0 dBc D-SUB CONNECTOR (15PIN PLUG) 2-PDA CONNECTOR (FEMALE) 6 Drain Current +12V (1) Transmission (2) Non Transmission Carrier-off leak power Burst Transmission Response --- --- --- --- --- --- --- --- 400 --- --- 3.3 A max 200 mA -70.0 2.6 --- 3.0 --- 1.0 0.5 V mV/dB dBp-p V dBm/200kHz S 7 8 150 Unit : mm 2-3 PA Control PA TXE 0 1 1 2 3 4 5 6 7 8 2-1 Noise from Primary Power Supply +12V: 200 mVp-pmax -10V: 100mVp-pmax OFF ON 9 10 11 12 13 14 15 9 Output Power Monitor Output Voltage Slope Frequency and Temperature drift Output Voltage under Burst off time Outside View Pout = 39.4 dBm f = 1895, 1906, 1918 MHz Without modulation --- 2.0 --- --- --- Amplifier Specifications (MA1065-1) 1. Maximum Ratings No. 1 2 3 4 5 Voltage Items +12 V -10 V Input RF Power Operating Temperature Storage Temperature Humidity Symbol Vs Vg Pin Top Tstg Rh Standard +16 V - 12.5V +5 dBm -20 ~ +80C -40 ~ +90C +50C, 95% R.H Ta = +25C Ta = +25C Ta = +25C, f = 1895 ~ 1918 MHz Base Plate Temperature Condition - 90 - - 91 - |
Price & Availability of MA1065-1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |