![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MN102H797 Type ROM (x8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Interrupts With main clock operated MN102H797 16 K 1K LQFP064-P-1414 *Lead-free 83.3 ns (at 3.0 to 3.6 V, 12 MHz) * RST pin * Watchdog * Timer counter 0, 1 underflow * Timer counter 2 under/overflow * Timer counters 2 to 4 compare capture A * External 0 to 3 * Serial ch.0 to 1 transmission * Serial ch.0 to 1 reception * A/D conversion finish * USB general-purpose * USBSOF Conforms to USB1.1. USB transceiver built-in Full-speed (12 Mbps) supported. 5 end points (FIFO built-in independently) FIFO size (EP0, 1, 2, 3, 4): 16, 64, 64, 64, 64 bytes * EP0 Control transfer IN/OUT (two ways) * EP1 to EP4 Interrupt/Bulk/Isochronous transfer supported. Settable to IN or OUT. Double Buffering function supported. When the MAXP size is set to a half or less of the MAXFIFO size for each EP, the Double Buffering function is made valid automatically. Timer counter 0: 8-bit x 1 (timer output, event count, timer interrupt) Clock source ********************* SYSCLK; prescaler 0; TM0IO pin Interrupt source **************** Timer counter 0 underflow Timer counter 1: 8-bit x 1 (timer output, event count, timer interrupt) Clock source ********************* SYSCLK; prescaler 0; TM1IO pin Interrupt source **************** Timer counter 1 underflow Connectable Timer counters 0 to 1 USB Functions Timer Counter Timer counter 2: 16-bit x 1 (timer output, event count, input capture, PWM output, 2-phase encoder input) Clock source ********************* SYSCLK; 1/8 of SYSCLK; timer counter 0 or 1 output; 2-phase encoding of TM2IOA pin/TM2IOB pin (1x, 4x) TM21OB pin Interrupt source **************** Timer counter 2 under/overflow; timer counter 2 compare capture A; timer counter 2 compare capture B Timer counter 3: 16-bit x 1 (timer output, event count, input capture, PWM output, 2-phae encode input) Clock source ********************* SYSCLK; 1/8 of SYSCLK; timer counter 0 or 1 output; 2-phase encoding TM3IOA pin/TM3IOB pin (1x, 4x) TM31OB pin Interrupt source **************** Timer counter 3 compare capture A Timer counter 4: 16-bit x 1 (timer output, event count, input capture, PWM output, 2-phae encode input) Clock source ********************* SYSCLK; 1/8 of SYSCLK; timer counter 0 or 1 output; 2-phase encoding TM4IOA pin/TM4IOB pin (1x, 4x) TM41OB pin Interrupt source **************** Timer counter 4 compare capture A 1 MAE00012CEM MN102H797 Serial Interface Serial 0: 8-bit x 1 (transfer direction of MSB/LSB selectable; transmission / reception of 7, 8-bit length) Clock source ******************* 1/2 or 1/16 of timer counter 0 output; external pin Serial 1: 8-bit x 1 (transfer direction of MSB/LSB selectable; transmission / reception of 7, 8-bit length) Clock source ******************* 1/2 or 1/16 of timer counter 0 output; external pin UART x 2 (common use with serial 0 and 1) I/O Pins A/D Inputs Special Ports Notes I/O 50 * Common use : 30 (pull-up resistance specifiable) 10-bit x 8-ch. (with S/H) USB ports (D+, D-), LED drive ports (P30, P31, P32, P33) 4 multiply PLL built-in, generation of internal 48 MHz at external oscillation 12 MHz Electrical Characteristics A/D characteristics Limit Parameter Non-linear error A/D conversion time Analog input voltage VIA Symbol Condition min 10-bit At external oscillation frequency 12 MHz 4 VSS VDD typ max 3 LSB s V Unit (Ta = 25C , VDD = 3.3 V , VSS = 0 V) Pin Assignment P07/AN7 P06/AN6 P05/AN5 P04/AN4 P03/AN3 P02/AN2 P01/AN1 P00/AN0 VDD VSS VSS VSS P61 34 48 47 46 45 44 43 42 41 40 39 38 37 36 35 P10/IRQ0 P11/IRQ1 P12/IRQ2 P13/IRQ3 P14/SBT0 P15/SBI0 P16/SBO0 P17 P20/TM0IO P21/TM1IO P22/TM2IOA P23/TM2IOB P24/TM3IOA P25/TM3IOB P26/TM4IOA P27/TM4IOB 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 MN102H797 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 P60 D- D+ P57 P56 P55 P54 P53 P52 P51 P50 P47 P46 P45 P44 P43 P42 P41 P40 10 11 12 13 14 OSCO 15 VSS LED0/P30 LED1/P31 LED2/P32 LED3/P33 SBT1/P34 SBO1/P35 SBI1/P36 P37 RST OSCI VDD LQFP064-P-1414 *Lead-free VDD VSS VSS 16 1 2 3 4 5 6 7 8 9 MAE00012CEM 2 SupportTool In-circuit Emulator Flash Memory Built-in Type PX-ICE102H79-LQFP064-P-1414 (under planning) Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Package MN102HF797 (under planning) 16 K 1K 83.3 ns (at 3.0 V to 3.6 V, 12 MHz) LQFP100-P-1414 *Lead-free 3 MAE00012CEM MN102H797 MAE00012CEM 4 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2002 JUL |
Price & Availability of MN102H797
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |