|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SI9711CY Vishay Siliconix Si9711 PC Card (PCMCIA) Interface Switch FEATURES * Single SO-16 Package * CMOS Inputs with Hysteresis * Extremely Low RON * Reverse Blocking Switches * HiZ Outputs in the Off-State * Low Power Consumption * Safe Power-Up DESCRIPTION The SI9711CY is a monolithic switch designed to meet the needs of the PC Card interface. The inputs are fully CMOS compatible and incorporate all the level shift and interface required to be driven by any CMOS driver. The external inputs can be driven to 3.3-V or 5-V by setting VL at the appropriate level. The switches are low RON and can carry the maximum currents found on the PC Card interface. The 5-V and 3.3-V switches do not have the parasitic diode found in vertical DMOS power switches. Low RON is achieved by using MOSFETs driven off the +12-VIN input. All level shifting is built into the SI9711CY. The SI9711CY is packaged in an SO-16 package and is rated over the commercial temperature range 0 to 70C. FUNCTIONAL BLOCK DIAGRAM TRUTH TABLE: S1 - S4 Logic 0 1 Switch OFF ON FaxBack 408-970-5600, request 70022 www.siliconix.com S-60752--Rev. F, 05-Apr-99 1 SI9711CY Vishay Siliconix ABSOLUTE MAXIMUM RATINGS Voltages Referenced to Ground VL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V +12 VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 V +5 VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V +3.3 VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V S1 through S4 (CMOS Inputs) . . . . . . . . . . . . . . . . . . . . . . VL + 0.5 V IOUT VPP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 mA VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V VPP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 V All Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V IOUT VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 A PD Max: (TA = 25C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 710 mW (TA = 70C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390 mW Junction Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125C Thermal Ratings RJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140C/W RECOMMENDED OPERATING CONDITIONS +12 VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 V 10% +5 VIN (must be present) . . . . . . . . . . . . . . . . . . . . . . . . . . 5 V 10% +3.3 VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 V 10% IOUT VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 A IOUT VPP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150 mA VL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 V 10% SPECIFICATIONS Test Conditions Unless Otherwise Specified Parameter Switch 1 On-Resistance RON IOFF tS1(on) tS1(off) I = 120 mA, +12 VIN = 10.8 V S1 = VL, S2 = GND +12 VIN = 13.2 V, VPP = 0 V S1 = GND TA = 25C TA = 70C TA = 25C TA = 70C 0.1 0.5 200 250 1 10 1 4 m A s Limits C Suffix, 0 to 70C Symbol +5 VIN = 5 V, +3.3 VIN = 3.3 V +12 VIN = 12 V, VL = 5.0 V, GND = 0 V Mina Typ Maxa Unit Off Current (+12 VIN to VPP) Switching Time CL = 0.1 F, S2 = Low, RL = 100 , See Figure 1. Switch 2 On-Resistance RON IOFF tS2(on) tS2(off) I = 120 mA, +12 VIN = 10.8 V S2 = S3 = VL VPP = 13.2 V, VCC = 0 V +12 VIN = 13.2 V TA = 25C TA = 70C TA = 25C TA = 70C 0.1 0.5 300 350 1 10 1 4 m A s Off Current (+12 VIN to VPP) Switching Time CL = 0.1 F, RL = 100 , S1 = S4 = GND, S3 = VL, See Figure 1. Switch 3 On-Resistance RON IOFF td(on) Switching Time tramp(on) tS3(off) I = 500 mA, +12 VIN = 10.8 V S3 = VL +5 VIN = 5.5 V, VCC = 0 V TA = 25C TA = 70C TA = 25C TA = 70C 1 200 0.5 4 s 200 250 1 10 m A Off Current (+12 VIN to VPP) +5 VIN = 5 V, CL = 0.1 F, VCC to GND RL = 100 , VCC to GND, See Figure 2. S-60752--Rev. F, 05-Apr-99 2 FaxBack 408-970-5600, request 70022 www.siliconix.com SI9711CY Vishay Siliconix SPECIFICATIONS Test Conditions Unless Otherwise Specified Parameter Switch 4 On-Resistance RON IOFF td(on) Switching Time tramp(on) tS4(off) I = 500 mA, +12 VIN = 10.8 V S4 = VL +3.3 VIN = 3.6 V, VCC = 0 V S2 = S3 = S4 = GND TA = 25C TA = 70C TA = 25C TA = 70C 1 200 0.5 4 s 150 185 1 10 m A Limits C Suffix, 0 to 70C Symbol +5 VIN = 5 V, +3.3 VIN = 3.3 V +12 VIN = 12 V, VL = 5.0 V, GND = 0 V Mina Typ Maxa Unit Off Current +3.3 VIN = 3.3 V, CL = 0.1 F, S3 = GND RL = 100 , See Figure 2. Power Supply +12 VIN Current VL Current I+12VIN(1) I+12VIN(2) IVL(1) IVL(2) S1 = S4 = GND, S2 = S3 = VL S1 = S4 = VL, S2 = S3 = GND S1 = S4 = GND, S2 = S3 = VL S1 = S4 = VL , S2 = S3 = GND 10 10 10 10 A Switch Control Inputs Input Voltage High VI(H) VI(L) VI(H) - VI(L) II(H) II(L) S1 through S4 = VL, VL = 5 V S1 through S4 = GND, VL = 5 V -1.0 VL = 3.3 V VL = 5 V VL = 3.3 V VL = 5 V VL = 3.3 V VL = 5 V 0.5 0.8 2.8 4.0 2.4 3.3 1.1 1.5 1.3 1.8 1.0 A 0.4 0.8 V Input Voltage Low Input Hysteresisb Input Current High Input Current Low Notes a. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. b. Guaranteed by design, not subject to production testing. FaxBack 408-970-5600, request 70022 www.siliconix.com S-60752--Rev. F, 05-Apr-99 3 SI9711CY Vishay Siliconix TIMING WAVEFORMS FIGURE 1. td(on) and tSX(on) FIGURE 2. tramp(on) PIN CONFIGURATION PIN DESCRIPTION Pin Number 1 2 3 4, 5 6, 7, 8, 12 9, 10 11 13 14 15 16 Symbol S3 S4 GND VPP VCC +3.3 VIN +5 VIN +12 VIN VL S1 S2 Description Control input for selecting +5 VIN to VCC. The PC Card terminology for this pin is VCC_EN1. Control input for selecting +3.3 VIN to VCC. The PC Card terminology for this pin is VCC_EN0. Ground connection. Program and peripheral voltage to PC Card slot. Supply voltage to slot. +3.3-V supply. +5-V supply. +12-V supply. Rail voltage for switch control inputs, selectable to 5-V or 3.3-V. Control input for selecting +12 VIN to VPP . The PC Card terminology for this pin is VPP_EN1. Control input for selecting VCC to VPP . The PC Card terminology for this pin is VPP_EN0. S-60752--Rev. F, 05-Apr-99 4 FaxBack 408-970-5600, request 70022 www.siliconix.com SI9711CY Vishay Siliconix TYPICAL CHARACTERISTICS (25C UNLESS OTHERWISE NOTED) FaxBack 408-970-5600, request 70022 www.siliconix.com S-60752--Rev. F, 05-Apr-99 5 SI9711CY Vishay Siliconix TYPICAL CHARACTERISTICS (25C UNLESS OTHERWISE NOTED) S-60752--Rev. F, 05-Apr-99 6 FaxBack 408-970-5600, request 70022 www.siliconix.com |
Price & Availability of SI9711CY |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |