| PART |
Description |
Maker |
| 4813-BB-24 |
Cable Assembly, Microware Right Angle SMA (Male) Both Ends
|
Pomona Electronics
|
| CA-2193 |
Cable, P7 to stripped/tinned ends, 6 feet 24 AWG zip cord
|
Tensility International Corp.
|
| CA-2185 |
Cable, P5 to stripped/tinned ends, 6 feet, 24 AWG zip cord
|
Tensility International Corp.
|
| CA-2195 |
Cable, P14 to stripped/tinned ends, 6 feet, 24 AWG, zip cord
|
Tensility International Corp.
|
| CRIMPFOX-ZA-5 |
Crimping pliers, for non-insulated connections, (cable lugs, ring or tabtype)
|
PHOENIX CONTACT
|
| 2-1193235-6 2-1191947-5 |
TWO CONDUCTOR CABLE, RADIATION-CROSSLINKED, MODIFIED ETFE INSULATED SHIELDED, JACKETED, NORMAL WEIGH, 600 VOLT
TWO CONDUCTOR CABLE, RADIATION-CROSSLINKED, MODIFIED ETFE INSULATED, SHIELDED, JACKETED, NORMAL WEIGHT, 600 VOLT
|
Tyco Electronics
|
| 64001-0300 19130-0044 19130-0046 19154-0015 64001- |
Assorted Non-Insulated and PVC Insulated Quick Disconnect, Ring, Spade and Butt
|
MolexKits
http://
|
| 64001-1400 19023-0012 CT-4071-1R 19130-0044 19130- |
Assorted Non-Insulated and PVC Insulated Quick Disconnect, Ring, Spade and Butt Splice Terminals
|
MolexKits
http://
|
| SD-87280-0700 0872800700 |
2.00mm (.079) Pitch Cable Holder, for Discrete Wire, Flat Cable and Ribbon Cable, 7 Circuits
|
Molex Electronics Ltd.
|
| SD-87280-0400 0872800400 |
2.00mm (.079) Pitch Cable Holder, for Discrete Wire, Flat Cable and Ribbon Cable, 4 Circuits
|
Molex Electronics Ltd.
|
|
