...recommended that a 0.1F ceramic capacitor be used on every device between VCC and VSS. This should be a high frequency capacitor of low inherent inductance and should be placed as close to the device as possible. In addition, a 4.7F bulk el...
Description
64K (8K x 8) UV EPROM and OTP ROM 64K的(8K的8)紫外线EPROM和检察官办公室光
...recommended that a 0.1F ceramic capacitor be used on every device between VCC and VSS. This should be a high frequency capacitor of low inherent inductance and should be placed as close to the device as possible. In addition, a 4.7F bulk el...
Description
From old datasheet system 4 Mbit (512Kb x 8) UV EPROM and OTP EPROM 4 Mbit 512Kb x 8 UV EPROM and OTP EPROM
...er. 3 data byp agc integrating capacitor: connected between data byp and vcc pulse det. this pin is used when data read mode. 48 servo byp agc integrating capacitor for servo: connected between servo byp and vcc pulse det. this pin is use...
...stable with a low-value output capacitor, typically 2.2 f on the outputs, allowing designers flexibility in external component selection. microsemi?s s-pak package enables maximum power dissipation and ease of assembly using surface...
Description
Cap-Free, NMOS, 150mA Low Dropout Regulator with Reverse Current Protection Low Drop Out Regulator - Dual
... from power source through the capacitor pad and then into idt pin. crystal a 25 mhz fundamental mode parallel resonant crystal with c l = 16 pf should be used. this crystal must have less than 300 ppm of error across temperature in ord...
capacitor for Real-Time Clock Charge Pump and Logic Level Translators for 3 V and 5 V GSM SIM Modules Narrow Body 4.4 mm 28-Lead TSSOP Package APPLICATIONS GSM/DCS/PCS Handsets TeleMatic Systems ICO/Iridium Terminals
GSM Power Management...
Description
GSM Power Management System 80-Lead Mixed Signal DSP with 7, 10-bit Analog Input Channels 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO28