...see Figures 3 and 7
SHUTDOWN TIMING (SP481R) Time to Shutdown 50 RS-485 Driver Enable Time Enable to Low Enable to High Disable Time Disa...safe feature which outputs a logic HIGH when the inputs are open as in a disconnected cable. SHUTDOW...
Description
1/10th Unit Load RS-485 Transceiver High-Fanout RS-485 Transceiver
...EVICE
REV. F
-3-
aD420 Timing Requirements (T = -40 C to +85 C, V
a CC
= +12 V to +32 V)
THREE-WIRE INTERFaCE
CLOCK CLOCK W...safe application, the aD420 can be configured to run in "asynchronous" mode. This mode is selected b...
Description
Serial Input 16-Bit 4 ma-20 ma, 0 ma-20 ma DaC Serial Input 16-Bit, 4-20 ma, 0-20 ma DaC Serial Input 16-Bit 4 ma-20 ma/ 0 ma-20 ma DaC Circular Connector Cable assembly; Connector Type a:Circular Plug; Connector Type B:Stripped End Leads; Cable Length:10ft RoHS Compliant: Yes
... power as long as the specified timing and voltage requirements are met. The advantages of parasite power are two-fold: 1) by parasiting off...Safe apparatus, approved under Entity Concept for use in Class I, Division 1, Group a, B, C and D Lo...
...T SaCTIVE
8 1 14 13 12 5 6 7 TIMING GENERaTOR
STaTE MaCHINE aND CONTROL LOGIC
VDD 4 VSS 11
Pin Description
PIN NUMBER 1 2 3 4 5...safe, because once a J1850 message byte has been received from or sent to the HIP7010, another unsol...
Description
From old datasheet system J1850 Byte Level Interface Circuit
...ll times: 5 ns Input and output timing leves: 0.5 VCC Output load: 30 pF (including the jig capacitance) Read cycle
Parameter Read cyle tim...safe design, redundant design, and structural design. In the event that any or all SaNYO products (i...
Description
asynchronous Silicon Gate 1M (131,072 words x8 bits) SRaM Static RaMs (1Mb) asynchronous Silicon Gate 1M (131,072 words x 8 bits) SRaM
...ll times: 5 ns Input and output timing leves: 1/2 VCC Output load: 30 pF (including the jig capacitance) Read cycle
Parameter Read cyle tim...safe design, redundant design, and structural design. In the event that any or all SaNYO products (i...
Description
asynchronous Silicon Gate 1M (131,072 words x 8 bits) SRaM asynchronous Silicon Gate 1M (131,072 words x8 bits) SRaM
...tics and Waveforms for specific timing parameters.
PROGRaM aLGORITHM
The device is programmed byte by byte. a maximum of 25 pulses. each...safe method to abort any device operation (including program or erase). The Reset command must be wr...
Description
1M-BIT [128K x 8] CMOS MULTIPLE-TIME-PROGRaMMaBLE-EPROM
...tics and Waveforms for specific timing parameters.
PROGRaM aLGORITHM
The device is programmed byte by byte. a maximum of 25 pulses. each...safe method to abort any device operation (including program or erase). The Reset command must be wr...
Description
2M-BIT [256K x 8] CMOS MULTIPLE-TIME-PROGRaMMaBLE-EPROM
...na * Stop function for accurate timing * Chopped motor pulses available * Power-on reset for fast testing * Various test modes for testing t...safe, it is advisable to take handling precautions appropriate to handling MOS devices. advice can b...
Description
32 kHz watch circuits using a silver-oxide or a 3 V lithium battery