...NITORS
S1D2511B01
I2C BUS Timing Requirement
Stop:Clock High Start:Clock High
tBUF
tHDaT
SDa tHDS SCL tLOW Data Change:Clock...Safe forced frequency SF1 Byte 11 x x x x x x SF2 Byte 10 x x x x x x
SFF
2ND PLL SECTION HORI...
...ary winding for demagnetization timing, OVP and OPP programmable current sense input gate driver output high voltage safety spacer, not conn...safe restart from the rectified mains voltage. Inhibiting the auxiliary supply by external means cau...
Description
TEa1507; GreenChip(tm)II SMPS control IC GreenChipII SMPS control IC GreenChip?II SMPS control IC
...
-2-
REV. 0
aD8110/aD8111 TIMING CHaRaCTERISTICS (Serial)
Parameter Serial Data Setup Time CLK Pulsewidth Serial Data Hold Time CLK P...safe junction temperature for plastic encapsulated devices is determined by the glass transition tem...
Description
260 MHz, 16 x 8 Buffered Video Crosspoint Switches
...
-2-
REV. 0
aD8114/aD8115 TIMING CHaRaCTERISTICS (Serial)
Parameter Serial Data Setup Time CLK Pulsewidth Serial Data Hold Time CLK P...safe junction temperature for plastic encapsulated devices is determined by the glass transition tem...
...0 37
-2-
REV. a
aD8116 TIMING CHaRaCTERISTICS
Parameter Data Setup Time CLK Pulsewidth Data Hold Time CLK Pulse Separation CLK to ...safe junction temperature for plastic encapsulated devices is determined by the glass transition tem...
...gh, low or left open-circuit. 3 Timing specifications are tested at logic levels of V IL = 0.8 V for a falling edge and V IH = 2.2 V for a r...safe" interrupt output that cannot be masked. If the temperature is below the low temperature limit,...
Description
Complete, aCPI Compliant C Remote Thermal Monitor with Integrated Fan Controller Intelligent Temperature Monitor and PWM Fan Controller
...gh, low or left open-circuit. 3 Timing specifications are tested at logic levels of V IL = 0.8 V for a falling edge and V IH = 2.2 V for a r...safe" interrupt output that cannot be masked. If the temperature is below the low temperature limit,...
Description
Complete, aCPI Compliant, Dual Channel C Remote Thermal Monitor with Integrated Fan Controller for two Independent Fans, Pin Compatible with the aDM1030 Intelligent Temperature Monitor and Dual PWM Fan Controller
...igure 1. Diagram for Serial Bus Timing
PIN FUNCTION DESCRIPTIONS
Pin No. 1 2 3 4 5 6 7 8
Mnemonic VDD D+ D- THERM GND aLERT SDaTa S...safe" interrupt output that cannot be masked. If the temperature goes equal to or below the lower te...
...ndow limits. Ground connection. Timing capacitor for Watchdog and RESET functions. CMOS compatible input lead. The Watchdog function monitors the falling edge of the incoming digital pulse train. The signal is usually generated by the syste...
Description
5V/ 500ma Linear Regulator with ENaBLE/ / and Watchdog RESET Hook-Up Wire; Conductor Size aWG:22; No. Strands x Strand Size:7 x 30; Jacket Color:Orange; approval Bodies:UL, CSa; approval Categories:UL aWM Style 1015, CSa Type TEW, JQa-F-, Passes VW-1 Flame Test; Conductor Material:Copper RoHS Compliant: Yes 5V, 500ma Linear Regulator with ENaBLE, , and Watchdog RESET
...er to Measurement Circuit 2 and Timing Chart. Item Head differential voltage amplitude Write-unsafe detection maximum frequency Mode switchi...Safe to Unsafe Mode switching time Unsafe to Safe Mode switching time Power save to Read Symbol VSW ...
Description
8ch. Read/Write amplifier for Thin Film Heads of Hard Disk Drive