| |
|
 |
Bay Linear
|
| Part No. |
B1117
|
| OCR Text |
...ared reflow with the component preheated to within 65 c of the soldering temperature range. thermal characteristics the thermal resistance of b1117 is 15 c/w from junction to tab and 31 c/w from tab to ambient for a total of 46 ... |
| Description |
Low Dropout Voltage Regulator
|
| File Size |
370.97K /
7 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
HolyStone International
|
| Part No. |
LCC
|
| OCR Text |
.... ceramic capacitors should b e preheated to within 50 c of the peak soldering temperature and then use a maximum 2 c/second ramp rate for both heating and cooling . a sudden increase or decrease in temperature during soldering may cause i... |
| Description |
Large Size NP0 & X7R MLCC Capacitors
|
| File Size |
207.90K /
2 Page |
View
it Online |
Download Datasheet |
| |
|
|
http://
M/A-COM Technology Solution...
|
| Part No. |
MA4E1317V7 MA4E1319-1 MA4E1319-2 MA4E1318
|
| OCR Text |
...y die attach : assembly can be preheated to 125 - 1 50c. use a minimum amount of epoxy. cure epoxy as per manufac- turer?s schedule. for extended cure times, temperatures should be kept below 200c. handling procedures the followin... |
| Description |
GaAs Flip Chip Schottky Barrier Diodes
|
| File Size |
132.08K /
7 Page |
View
it Online |
Download Datasheet |
| |
|
|
ITT, Corp.
|
| Part No. |
SPX1202S-L-1.5 SPX1202S-L-3.3 SPX1202M3-L-1.5
|
| OCR Text |
...rared reflow with the component preheated to within 65 c of the soldering temperature range. thermal characteristics the thermal resistance of spx1202 is 15 c/w from junction to tab and 31 c/w from tab to ambient for a total of 4... |
| Description |
1.5 V FIXED POSITIVE LDO REGULATOR, 1.15 V DROPOUT, PDSO8 SOIC-8
3.3 V FIXED POSITIVE LDO REGULATOR, 1.15 V DROPOUT, PDSO8
1.5 V FIXED POSITIVE LDO REGULATOR, 1.15 V DROPOUT, PDSO4
|
| File Size |
141.81K /
5 Page |
View
it Online |
Download Datasheet |
| |
|
|
TOKO, Inc.
|
| Part No. |
MSCH-4532C-8R2M
|
| OCR Text |
... hard, the sample shall then be preheated for about 2 minutes in a temperature of 130 150 and after it has been immersed to a depth 0.5mm below for 3 0.2 seconds fully in molten solder m705 with a temperature of 245 5 . more than 90%... |
| Description |
1 ELEMENT, 8.2 uH, GENERAL PURPOSE INDUCTOR, SMD CHIP, 1813, LEAD FREE
|
| File Size |
111.75K /
8 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
